Guide
Roof Cleaning Business:Shingle Maker Guidance, Soft-Wash Chemicals, OSHA Fall Protection, Insurance Class and Pricing per Square
Roof cleaning business guide: Malarkey's shingle cleaning guidance, chemical handling, OSHA fall protection, insurance class and pricing per roofing square.
A roof cleaning business removes algae streaks, moss and lichen with a low-pressure chemical wash, priced per roofing square of 100 square feet. Running one means following the shingle maker's guidance, meeting OSHA's chemical and fall protection duties, insuring under a class that names roofs, and measuring roof area with its pitch.
A roof cleaning company loses money and customers in specific ways. A roof is washed at pressure, granules come off with the algae, and the homeowner's roofer blames the cleaner for the next leak. A helper works a 6/12 roof without a harness because the owner never wore one, and the first employee changes which rules apply. A quote is built from the house's footprint, and a 10/12 roof carries 30.2 percent more surface than the price assumed. FieldRanger makes a cleaning app that runs inside HubSpot, and this guide covers the roof as a separate service line from house washing. It sets roof work beside other exterior washing and reads one shingle maker's guidance on pressure. The chemical duties, the OSHA fall protection standards and the insurance class follow. It then measures roof area in squares, prices a roof in Savannah, Georgia, and closes with a checklist.
Four terms carry the page. A roofing square is 100 square feet of roof surface, measured along the slope, not the floor plan. Pitch is the roof's rise in inches per 12 inches of run, written 6/12. A steep roof, in OSHA's construction definitions, has a slope "greater than 4 in 12"; a low-slope roof has a slope of 4 in 12 or less. Soft washing applies a cleaning solution at low pressure and lets it work, where pressure washing removes dirt by the force of the water.
Roof cleaning compared with house washing and flatwork
The three services share a truck and a customer list, and differ in the inputs that set a price.
| Input | Roof cleaning | House washing | Driveways and patios |
|---|---|---|---|
| Method | Low-pressure chemical application and rinse | Low-pressure wash on siding | Pressure washing with a surface cleaner |
| Unit of price | Per roofing square, adjusted for pitch | Per house or per square foot of wall | Per square foot of flatwork |
| Access | On the roof or from a ladder at the eave | From the ground with extension wands | From the ground |
| Fall protection | Required for employees at 4 or 6 feet, by standard | Ladder rules on second-story walls | Not at height |
| Manufacturer guidance read | Shingle maker | Siding maker | Concrete or paver maker |
The roof is the only one of the three where a worker stands on the surface being cleaned. That single fact sets its safety standard, its insurance class and its price. House washes and flatwork are covered in residential soft washing and pressure washing business.
Malarkey's guidance on pressure washing asphalt shingles
Malarkey Roofing Products, a shingle maker based in Portland, Oregon, states two objections to pressure washing an asphalt roof. Climbing a roof to remove algae streaks "via pressure washing is very slippery and dangerous" (Malarkey, Managing Moss and Algae on the Modern Roof, April 20, 2023, read November 13, 2026). The second objection is that "Pressure washing can also dislodge a shingle's granules, which are their primary defense against damage and UV aging". The same page warns that "excessive walking and movement atop shingles can also dislodge their granules and prematurely age them".
The page also contains a line a cleaning procedure has to resolve. After a chemical treatment, it says to rinse "with a garden hose or pressure washer set to general cleaning". A company reading the whole page therefore writes its rinse method down, as garden-hose pressure or a stated low setting. The procedure then does not rest on the one sentence that permits a pressure washer.
Two further statements on the page bear on demand and on the sale. Malarkey writes that on roofs without algae protection in "coastal and damp, humid climates", shingles "can manifest black streaks in as little as three (3) years". It sells shingles with 3M copper granules that "release copper ions which inhibit algae growth", and names zinc or copper strips as a preventive measure "best installed when getting a new roof". A roof cleaner in a humid coastal market therefore records whether the roof has algae-resistant shingles, since those are what the maker sells to resist the regrowth a cleaning removes.
Cleaning chemicals and the hazard communication duty
The chemical on a roof is a hazardous chemical in OSHA's sense, and the duty attached to it is an employer's duty. OSHA's summary of employer responsibilities states that employers with hazardous chemicals in the workplace "must develop and implement a written hazard communication program and train employees on the hazards they are exposed to" (OSHA, Employer Responsibilities, read November 13, 2026). A copy of safety data sheets "must be readily available".
The duty has a starting point that matters to a one-person roof cleaner. OSHA's coverage FAQ lists "self-employed workers" among those not covered by the OSH Act (OSHA, FAQ on coverage, read November 13, 2026). The written program, the training and the data sheet binder are therefore due on the day the first employee starts, not on the day the business opens. A cleaner who prepares them first has nothing to build in the week a helper is hired.
Three records go with every roof the chemical touches:
- The product name and the safety data sheet for each product on the truck, kept with the truck.
- The mix actually applied on the job and the dwell time, written on the work order.
- The steps taken for plants, gutters and downspouts below the roof, since runoff lands in the customer's beds.
Malarkey's page itself notes that a bleach treatment "does come with its own unsightly downstream impacts on the local environment and watersheds". The plant-protection step belongs in the quote as hours, not only in the procedure.
Fall protection under OSHA 1926.501 and 1910.28
Two OSHA standards can govern an employee on a residential roof, and the trigger heights differ. The construction standard, 29 CFR 1926.501, covers steep roofs in paragraph (b)(11). Each employee "on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems" (OSHA, 1926.501(b)(11), read November 13, 2026). For residential construction, 1926.501(b)(13) sets the same 6-foot trigger and allows a written fall protection plan only where the employer shows the systems are infeasible or create a greater hazard.
The general industry standard, 29 CFR 1910.28, sets a lower trigger. Each employee on a walking-working surface with an unprotected edge "4 feet (1.2 m) or more above a lower level" is protected by guardrails, safety nets or personal fall protection systems (OSHA, 1910.28(b)(1), read November 13, 2026). On residential roofs it permits a fall protection plan under the same infeasibility condition.
| Question | Construction, 1926.501 | General industry, 1910.28 |
|---|---|---|
| Height that triggers protection | 6 feet | 4 feet |
| Steep roof (over 4 in 12) | Guardrails with toeboards, nets or personal fall arrest | Guardrails, nets or personal fall protection |
| Low-slope roof | Guardrails, nets, fall arrest, or warning lines with a monitor or other system | Distance-based rules from the edge, under 1910.28(b)(13) |
| Fall protection plan instead of systems | Only on proof of infeasibility or greater hazard | Same condition, residential roofs |
Which standard applies turns on whether the job is construction or maintenance. OSHA defines construction work as "construction, alteration, and/or repair, including painting and decorating", and describes maintenance as "keeping equipment working in its existing state" (OSHA interpretation letter, November 18, 2003). The same letter states that work "anticipated, routine and done on a regularly scheduled/periodic basis to help maintain the original condition of the component" is "suggestive of maintenance". A scheduled roof cleaning reads as maintenance under that test, and a cleaning sold together with a repair or a coating reads as construction. No OSHA letter on residential roof cleaning itself was found on November 13, 2026, so a company that protects employees at 4 feet meets both standards' height triggers.
The equipment cost is small beside the exposure. A Guardian 00815 roofer's kit with a harness, a 50-foot lifeline and a reusable anchor is listed at $113.41 (Big Rock Supply, Guardian 00815, read November 13, 2026). The larger cost is time: installing an anchor at the ridge and removing it adds labor to every steep roof, which the price per square has to carry.
Insurance class for roof work
The insurer's classification of the work sets the premium, and roof work sits in a costly class. Insureon publishes these medians for roofing contractors who quote through it, with general liability at $1 million per occurrence and $2 million aggregate (Insureon, roofing contractor insurance cost, updated November 6, 2026):
| Policy | Monthly | Annual |
|---|---|---|
| General liability | $317 | $3,808 |
| Workers' compensation | $175 | $2,101 |
| Commercial auto | $268 | $3,212 |
| Inland marine (tools and equipment) | $42 | $505 |
A roof cleaner is not a roofer, and an insurer may class it with pressure washing instead. Insureon's general liability median for pressure washing companies is under a quarter of the roofing figure (Insureon, pressure washing insurance cost, updated September 8, 2026). The pressure washing business guide prices that class. The application names roof work, the chemical and the maximum height in writing, and the classification printed on the policy is read before the first roof. A policy written for flatwork that excludes work at height leaves the roof uninsured whatever it cost. The coverage questions a cleaning company answers for its contracts are in cleaning business insurance.
Roof area in squares: footprint, overhang and pitch
A roof is priced on its sloped surface, which is larger than the floor plan beneath it. The plan area is the footprint plus the overhang at the eaves and rakes, and the sloped area is the plan area multiplied by a pitch factor. The factor is the square root of one plus the square of rise over run.
| Pitch | Pitch factor | Roof surface for 2,000 sq ft of plan area |
|---|---|---|
| 4/12 | 1.054 | 2,108 sq ft |
| 6/12 | 1.118 | 2,236 sq ft |
| 8/12 | 1.202 | 2,404 sq ft |
| 10/12 | 1.302 | 2,604 sq ft |
| 12/12 | 1.414 | 2,828 sq ft |
Squares are the surface divided by 100. A 2,000 square foot plan at 12/12 holds 28.28 squares, not 20, so a price per square applied to the footprint leaves 41.4 percent of the roof unpaid. Pitch is read with a level and a tape at the gable, from roof plans, or from aerial measurement. It is written on the estimate with the squares, so the price can be checked.
Pricing per square: chemical, labor, access and minimum charge
A price per square recovers four kinds of cost. Chemical is the product and surfactant per square, from the company's purchase records and its mix. Labor is the hours of the people on site and driving, at a loaded rate. Access is the extra time a steep or tall roof takes: anchors, ladders, roof jacks. Overhead is insurance, the truck, equipment and marketing, spread over the year's roofs.
Two adjustments keep the price per square honest. A pitch surcharge above a stated pitch covers the anchor and rope work that a walkable roof does not need. A minimum charge covers the fixed cost of a visit on a small roof: the drive, the setup, the ladder, the rinse and the cleanup take as long on 12 squares as on 20. Both are written on the price sheet and on the estimate, so a customer comparing quotes sees what they are for. The fields of a written cleaning estimate are on the cleaning estimate template.
Sample roof cleaning priced in Savannah, Georgia
The job is hypothetical: a one-story house in Savannah with an asphalt shingle roof at 6/12 pitch. It has 2,100 square feet of plan area including overhangs, and black algae streaks on the north slopes. The owner and one employed helper clean it. Plan area, hours, the owner's time value, chemical cost per square, miles, the jobs per year, equipment cost, the workers' compensation share of wages and the price per square are sample inputs. The wage, payroll tax rate, mileage rate and insurance medians come from published sources.
The helper's wage starts from the nearest occupation O\NET publishes, cleaners of vehicles and equipment, since it lists none for roof cleaning. In the Savannah metro the median was $14.06 an hour in BLS 2025 wage data ([O\NET OnLine, Georgia wages for 53-7061.00](https://www.onetonline.org/link/localwages/53-7061.00?st=GA), read November 13, 2026). Employer Social Security and Medicare add 7.65 percent (IRS Topic 751). The IRS business mileage rate for July to December 2026 is 76 cents a mile (IRS, Standard Mileage Rates).
| Line | Calculation | Result |
|---|---|---|
| Plan area with overhangs (sample) | Measured footprint plus eaves | 2,100 sq ft |
| Pitch factor at 6/12 | √(1 + 0.5²) | 1.118 |
| Roof surface | 2,100 × 1.118 | 2,347.80 sq ft |
| Squares | ÷ 100 | 23.48 |
| Line | Basis | Amount |
|---|---|---|
| Helper | 3.75 hours on site and driving × $14.06 × 1.1965 (payroll taxes + 12% workers' compensation, sample) | $63.08 |
| Owner's time | 3.75 hours × $35.00 (sample) | $131.25 |
| Chemical and surfactant | 23.48 squares × $4.50 (sample) | $105.66 |
| Vehicle | 24 miles (sample) × $0.76 | $18.24 |
| Insurance | $9,121 of Insureon roofing medians (liability, workers' compensation, auto) ÷ 180 roofs a year (sample) | $50.67 |
| Equipment and other overhead (sample) | Pump, hoses, ladders, anchors, marketing | $40.00 |
| Total cost | $408.90 | |
| Price | 23.48 squares × $28.00 (sample) | $657.44 |
| Margin | $248.54 ÷ $657.44 | 37.8% |
Three results follow. Priced on the plan area's 21 squares, the same roof would bill $588.00 and give up $69.44 of the margin to the pitch. The same house with a 10/12 roof holds 27.34 squares. At $28.00 plus a 20 percent steep-roof surcharge (sample), it prices at $918.62, and the surcharge pays for the anchor time the steeper roof adds. Insurance at roofing medians is $50.67 a roof at 180 roofs a year, and the same premiums spread over 90 roofs would double that line.
Roof cleaning business checklist
- Register the business name and confirm it is available; naming patterns and the checks are in cleaning business names.
- Read the shingle maker's cleaning guidance for the roofs in the market and write the company's method, including the rinse pressure, into its procedure.
- Keep the product label and safety data sheet for every chemical on the truck.
- Before the first hire, write the hazard communication program and train the employee on it.
- Protect every employee on a roof at 4 feet and above, with the anchor, harness and lifeline inspected before each use.
- Insure the work under a class that names roofs, the chemical and the height, and read the classification on the policy.
- Measure each roof as plan area times the pitch factor, and write squares and pitch on the estimate.
- Set a price per square, a pitch surcharge and a minimum charge from the company's own costs.
- Photograph each roof before and after, with the slopes, gutters and plant beds in frame.
- Verify after every 20 roofs: compare hours, chemical used and margin per square with the price sheet, and reset the price per square where they differ.
Roof washes, photos and repeat cleanings in FieldRanger
FieldRanger keeps each roof cleaning on the homeowner's HubSpot record. Estimates built in HubSpot and Estimates built in FieldRanger carry the squares, pitch and price on the deal. PandaDoc sends the estimate for signature, and Won deals become jobs with their context carried over. One job can carry several technicians, so the owner and the helper work the same roof on one job. The Drag-and-drop calendar moves those jobs when weather turns, and Auto-routing builds the day's route between roofs.
On site, Digital work orders put the job details and instructions on the technician's phone, and Custom checklists hold the anchor check, the plant protection steps and the mix record. Photo documentation attaches before and after photos to the work order. Job photos in HubSpot sync them to the customer's record, which is the evidence if a later leak is blamed on the cleaning. Digital signatures record the homeowner's sign-off on completion.
Invoices from completed work orders produce the bill, Stripe takes payment in the field and QuickBooks syncs invoices and payments. Recurring job templates hold repeat cleanings on a set interval, and Revenue reports show margin by service type, which separates roofs from house washes. FieldRanger has no weather feed, so the owner decides rain and wind holds and drags the job to a new day. Homeowners can book a cleaning online. Plans are on pricing, where Start free trial runs 14 days with no card.
Frequently asked questions
How to start a roof cleaning business?
Read the shingle maker's cleaning guidance and write a low-pressure method, insure the work under a class that names roof work, buy fall protection for every employee, prepare the hazard communication program before the first hire, and price per roofing square adjusted for pitch.
Is pressure washing a shingle roof allowed?
Malarkey, a shingle maker, advises against it. It states that pressure washing can dislodge a shingle's granules, which protect it from damage and UV aging, and that working a roof with a pressure washer is very slippery and dangerous.
What OSHA rule applies to roof cleaning?
For employees, 29 CFR 1926.501 requires fall protection at 6 feet on construction work, and 29 CFR 1910.28 requires it at 4 feet on general industry work such as routine maintenance. Self-employed workers are outside the OSH Act.
How do roof cleaners price a job?
Per roofing square of 100 square feet of sloped surface: plan area times the pitch factor, divided by 100, times a price per square, with a surcharge on steep roofs and a minimum charge for small ones. The sample Savannah roof is 23.48 squares at $28.00, or $657.44.
How much does roof cleaning insurance cost?
It depends on the class the insurer assigns. Insureon publishes a median of $317 a month for roofing contractors' general liability, and its pressure washing median is under a quarter of that, so the application names roof work in writing.
The Savannah roof earns its $248.54 only because it was measured along the slope. The 2.48 squares the plan area hides are where a roof cleaner's margin is kept or given away.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo