Glossary

What Is Soft Washing? Definition and Example

What is soft washing: cleaning roofs and siding with a diluted sodium hypochlorite solution at low pressure. A roof example, the dilution, and pressure washing.

Updated 3 min read

Soft washing is an exterior cleaning method that applies a diluted cleaning solution, based on sodium hypochlorite, at low pressure to kill and loosen algae, moss, mold and mildew on roofs, siding and other surfaces, then rinses it off at low pressure. The solution does the work that water pressure does in pressure washing, and the surface is not abraded.

The term sits in the field service glossary of FieldRanger, the power washing software that runs exterior cleaning jobs inside HubSpot.

Soft washing an asphalt shingle roof

The Asphalt Roofing Manufacturers Association sets out the roof method: "a 50:50 mix of laundry strength liquid chlorine bleach and water", sprayed on, left for 15 to 20 minutes without drying, and rinsed "thoroughly with low pressure water" (ARMA, Algae and Moss Prevention and Cleaning, February 22, 2012, checked November 2026). Landscaping is protected from the runoff, and no pressure washer touches the shingles, since it "will cause granule loss".

The dilution can be stated as a concentration. The CDC describes household bleach as "aqueous solutions of 5.25%–6.15% sodium hypochlorite" (CDC, Chemical Disinfectants, November 28, 2023). Mixed half and half with water, ARMA's solution puts roughly 2.6 to 3.1 percent sodium hypochlorite on the roof. A crew starting from a stronger commercial product dilutes further to reach that strength.

A cleaned roof can then be booked as a yearly job. In FieldRanger, recurring job templates hold the annual roof wash, the estimate is built from the HubSpot deal or contact record, and time logged against each job shows what each roof took.

Soft washing, pressure washing and power washing

Soft washing removes growth with chemistry at low pressure. Pressure washing removes dirt with the force of the water, and the surface sets the limit. James Hardie warns that "acid and high pressure washing can damage the fiber cement surface"; a pressure washer used on its siding keeps a wide fan tip, a distance of at least 6 feet and "pressure below 1500 psi" (James Hardie, Homeowner Care and Maintenance Guide, 2015). Power washing names the same pressure method.

Soft wash pressure washing names soft washing done with pressure washing equipment: a downstream injector draws the solution into the hose, and a low-pressure nozzle applies it. The method is still soft washing, because the chemistry does the cleaning.

  • What is soft washing a house: the method applied to siding, gutters and trim.
  • What is superheat: another reading recorded against a manufacturer's target, from HVAC rather than exterior cleaning.

Frequently asked questions

What is soft washing?

An exterior cleaning method that applies a diluted sodium hypochlorite solution at low pressure to kill algae, mold and mildew on roofs and siding, then rinses it off at low pressure.

What is soft wash pressure washing?

Soft washing done with pressure washing equipment: a downstream injector draws the solution into the hose, and a low-pressure nozzle applies it.

What is the difference between pressure washing and soft washing?

Pressure washing cleans with the force of the water; soft washing cleans with a chemical solution at low pressure. ARMA rules out pressure washers on asphalt shingles, and James Hardie keeps pressure on its fiber cement siding below 1,500 psi.

A soft wash is specified by three entries on the work order, the product, the ratio and the dwell time, and a crew that records them can repeat the result next year. Start free trial puts that work order in a crew's hands for 14 days with no card; pricing lists the per-technician plans.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo