Industry

Deck Builder Software:FieldRanger for Deck and Patio Contractors on HubSpot

Deck builder software on HubSpot: FieldRanger schedules site visits and each build day, records footing and framing inspections and change orders, and bills.

Updated 10 min read

Deck builder software runs a deck contractor's jobs from the site visit to the final inspection: the estimate, the permit, each build day, the inspections, the change orders and the invoice. FieldRanger keeps that work in HubSpot, where the estimate starts on the deal and each build day is a job with its checklist and photos.

Decking belongs to the outdoor construction trades in field service software by industry. The phrase "deck builder software" also names tools for assembling card-game decks; this page concerns deck contractors. A deck job runs in a fixed sequence: the footings are inspected before the concrete, the framing before the boards, and the finished deck before anyone uses it. FieldRanger has no multi-day jobs, so the sequence is a series of one-day jobs, each assigned to the lead carpenter for that day.

Wood decks, composite decks, railings and patios

Deck and patio work and what each job records
Job typeSold byMaterials on the jobInspection points
Pressure-treated wood deckSquare foot, plus stairs and railingTreated posts, beams, joists, ledger, hangers, deckingFootings, framing, final
Composite or PVC deckSquare foot, over a treated frameComposite boards, hidden fasteners, fascia, joist tapeFootings, framing, final
Railing: wood, aluminum, cable or glassLinear foot, plus posts and gatesPosts, rails, infill, post hardwareGuard height and post attachment at final
Stairs and landingsPer riser or per flightStringers, treads, landing footingFooting and final
Ground-level platform or paver patioSquare footPavers, base, edge restraint, or a low frameAs the jurisdiction requires
Repair and board replacementPer job or per boardReplacement boards, joists, hardwareAs the scope requires

Each type changes what the site visit has to capture. A composite deck needs the board color and fastener system on the estimate. A railing needs the deck's height above grade. A repair needs photos of the existing framing, because rot found under the boards becomes a change order.

A composite deck from site visit to final inspection

  1. A homeowner's request arrives through a HubSpot form, creating the contact and an open deal.
  2. At the site visit the estimator measures the footprint, photographs the wall where a ledger would attach and records the cladding, the deck height above grade and the frost depth the jurisdiction sets. The photos attach to the deal.
  3. The estimate is built on the HubSpot deal or in FieldRanger, where it stays tied to the deal, and goes out for signature through PandaDoc.
  4. The homeowner signs. The office files the permit and the 811 locate request and records both numbers on the deal; the deal moves to won, and FieldRanger creates the first job with the site photos carried over.
  5. Day one is the footing holes. The lead carpenter's clock-in records the location, the checklist calls for a photo of the locate marks before the first hole, and each hole is photographed with a tape at its depth.
  6. The footing inspection comes next. Completing the day's job can trigger a HubSpot workflow that creates the office's task to request it.
  7. With the footings passed, day two pours the concrete and sets the posts. Days three and four frame the deck, attach the ledger and flashing and fit the lateral load devices; the framing inspection follows.
  8. Days five and six lay the boards and build the railing and stairs. The final inspection passes, the homeowner signs on the phone, and the invoice is generated from the completed work order. Payment can be taken through Stripe, and invoices and payments sync with QuickBooks.

Each day in that sequence is its own job. The dispatcher places the build days with bulk scheduling, and drags the later days when an inspection is late.

DCA 6 provisions as field checks

The American Wood Council's DCA 6, the Prescriptive Residential Wood Deck Construction Guide, sets out deck construction methods based on the International Residential Code. The edition AWC's DCA 6 page links to is based on the 2015 IRC, and it states that "Where differences exist between provisions of this document and the IRC, provisions of the IRC shall apply" and that all construction and materials must be approved by the authority having jurisdiction. It applies to single-level residential wood decks attached to the house to resist lateral forces. Decks carrying large concentrated loads such as hot tubs, and decks with snow loads over 40 psf, are outside its scope (American Wood Council, DCA 6 Prescriptive Residential Wood Deck Construction Guide, copyright 2018, checked November 2026).

Five of its provisions are settled on site, each on a particular day of the build:

  • Footings "shall bear on undisturbed soil at least 12 inches below the undisturbed ground surface or below the frost line, whichever is deeper", and the building official verifies bearing conditions in the field before concrete is placed. The guide directs builders to call 811 before digging.
  • A ledger may not attach to brick, masonry or stone veneer, hollow masonry, a cantilevered floor overhang or a bay window; those decks are built as non-ledger decks. Lead anchors are prohibited, and ledger fasteners are ½-inch lag screws or through-bolts.
  • Hold-down tension devices go in at least two locations within two feet of the edge of the deck, each with a capacity of at least 1,500 pounds.
  • Every deck more than 30 inches above grade requires a guard. Guard posts are at least 4x4 nominal, and the hold-down anchors at the posts carry at least 1,800 pounds for a guard up to 36 inches high.
  • A deck is not used or occupied until final inspection and approval are obtained.

In FieldRanger each provision becomes a line on the checklist for the day it is decided. The site visit checklist records the wall cladding, because a brick veneer turns the job into a non-ledger deck and changes the estimate. The footing day records the depth photo for each hole. The framing day records the ledger fastener pattern, the flashing and each hold-down device in photos. The final day records the guard height. The photos attach to the work orders and sync to the homeowner's HubSpot record, where the inspector's questions can be answered from the file.

Deck build days, inspections and weather holds

FieldRanger has no multi-day jobs, so a six-day build is six jobs, each with its own date, lead carpenter, checklist and photos. An inspection between build days is a hold on the calendar rather than a job. When the footing inspection slips, the dispatcher drags the pour and every later day on the drag-and-drop calendar, and conflict detection warns where a moved day lands on another job.

FieldRanger has no weather feed. A rain day is handled by the dispatcher moving the jobs, and the office texts the homeowner the new date through Twilio. Capacity planning shows when the season's calendar is full, and skill-based assignment matches jobs to carpenters by certification and expertise, so a cable railing day goes to a carpenter trained on that system. The general case of a same-day board is covered under dispatch software.

The off-season has repeat work of its own. Recurring job templates hold maintenance contracts, such as a yearly deck cleaning and sealing visit, so last year's builds return to the calendar each spring.

Change orders on a deck job

Deck builder change order software has to capture the change where it is found: on the deck, with the boards up. A rotted rim joist under an old deck, a homeowner who adds a second stair, an upgrade from wood to aluminum railing. In FieldRanger the finding is photographed and noted on the day's work order and posts to the HubSpot timeline. The office builds the revised estimate on the same HubSpot deal, and it goes out for signature through PandaDoc before the added work starts. The change is a signed estimate on the deal it belongs to.

Billing the change follows the same rule as the rest of the job: the invoice is generated from the completed work order. A deposit invoice can go out at signing, with the balance invoiced on completion. FieldRanger has no progress billing, so a draw at framing has no invoice of its own. Billing detail for decks is the subject of deck builder invoicing software.

Lumber, boards, hardware and tools

Lumber and boards are ordered per job; hardware is stock. Joist hangers, structural screws, ½-inch lag screws, hidden fasteners, flashing and joist tape are checked out of a specific warehouse, low-stock warnings flag them before a shelf runs out, and materials tracking logs what each day's job used for job costing. Revenue reports show job revenue and margin by service type, so composite builds, wood builds, railings and repairs can be compared on margin.

The tools are equipment. An auger, a post-hole digger, a miter saw station and a compressor carry QR codes, are checked out to a job and show as taken on the availability calendar once a job claims them. Equipment maintenance schedules their service. Trucks sit on the live map with pre-trip inspection checklists, and a trailer can be held as an equipment record assigned to the job.

Deck building business software and the HubSpot record

Deck building business software has to follow the lead as far as the finished deck. HubSpot reports follow revenue from the first form fill to the completed job, which separates decks sold from search, yard signs, neighbor referrals and builder partners. Contacts and companies sync both ways; a builder or remodeler that subcontracts decks is a HubSpot company with its project managers as contacts. Job status shows on each deal, and photos taken on the job sync to the customer's HubSpot record, which gives the marketing team the before and after set from each build. The rest of the HubSpot side is described under HubSpot field service.

Builder Prime and deck-specific platforms compared with FieldRanger

Builder Prime's deck and railing page states that "Builder Prime's deck builder change order software makes it easy to document it, re-price the work, get signed approval". It offers to "Collect deposits up front, bill as the project hits key milestones, and let homeowners pay online". It treats design as a separate tool: "Deck design software like Trex or Chief Architect can create a beautiful deck." Its integrations list does not include HubSpot, and the page links a comparison against HubSpot (Builder Prime, decks and railings, checked November 2026).

A deck company that bills milestone draws on every job is better served by a platform of that kind. FieldRanger fits the deck company already selling through HubSpot that schedules its work day by day and wants each day's photos and inspections on the deal the deck was sold from.

Deck work outside FieldRanger

  • No 3D deck design or floor plan drawing; deck builder 3D floor plan software is a separate category of design tool.
  • No span table, footing size or load calculation.
  • No board or hardware takeoff from a drawing.
  • No permit filing and no locate-ticket submission.
  • No multi-day jobs: each build day is its own job.
  • No progress billing.
  • No weather feed.

Running the business is covered in the deck building business guide, and billing in deck builder invoicing software.

Frequently asked questions

What is deck builder software?

Software that runs a deck contractor's jobs: estimates, permits, build days, inspections, change orders and invoices. FieldRanger does this on HubSpot records, with each build day as a job carrying its own checklist and photos.

Is there free deck builder software?

FieldRanger is a paid product, priced per technician, with a 14-day trial that needs no card. Design tools that draw a deck are a separate category from software that schedules and bills the build.

Is there deck builder software online?

FieldRanger runs inside HubSpot, a web-based CRM, with native iOS and Android apps for the carpenters on site.

What does DCA 6 require for deck footings?

Footings bear on undisturbed soil at least 12 inches below the undisturbed ground surface or below the frost line, whichever is deeper, and the building official verifies the bearing conditions before concrete is placed.

When does a deck need a guard?

DCA 6 requires a guard on every deck more than 30 inches above grade, with guard posts at least 4x4 nominal. The local code adopted by the jurisdiction governs where it differs.

Can a deck ledger attach to brick veneer?

No. DCA 6 prohibits ledger attachment to brick, masonry or stone veneer, hollow masonry, cantilevered floor overhangs and bay windows; those decks are built as non-ledger decks.

Does deck builder software handle change orders?

In FieldRanger the change is photographed on the day's work order, priced as a revised estimate on the same HubSpot deal and signed through PandaDoc before the added work starts.

Can deck builder software schedule a multi-day build?

FieldRanger schedules each build day as its own job, because it has no multi-day jobs. Bulk scheduling places the days together, and the dispatcher moves the later days when an inspection slips.

A FieldRanger deck file holds the footing-hole photos the inspector passed, the hold-down photos from framing day and the homeowner's sign-off at final, each on its own day's job under one HubSpot deal. Billing continues on deck builder invoicing software, neighboring trades under field service software by industry, and plans per technician on pricing; Start free trial lasts 14 days, card not required.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo