Industry

Deck Builder Invoicing Software:Lumber, Composite, Permit and Deposit Lines in FieldRanger and HubSpot

Deck builder invoicing software on HubSpot: FieldRanger bills lumber, composite boards, fasteners and permit fees from each build day's completed work order.

Updated 7 min read

Deck builder invoicing software bills a deck job line by line: framing lumber, composite or wood decking, railings, fasteners and hardware, the permit fee and the labor for each build day. FieldRanger generates each invoice from a completed work order and keeps the bill, the photos and the payment on the homeowner's HubSpot deal.

Billing follows the build in deck builder software, and the build is a series of days. FieldRanger has no multi-day jobs, so a six-day composite deck is six jobs, each with its own work order. Each day's materials and hours are recorded against that day, and the deposit and the final payment sit on either side of the series.

Lumber, composite boards and fastener lines

A deck's materials reach the job by two paths. Framing lumber, decking boards and railing systems are bought for one deck, by size and color, and delivered to the site. Hangers, screws, lag screws, hidden fasteners and flashing are stock, drawn from the shop's shelves for whichever deck needs them.

Deck invoice material lines and how each reaches the job
LineUnitPath to the jobFieldRanger record
Pressure-treated posts, beams and joistsPieces by size and lengthLumberyard delivery to the siteLogged as materials on the day's job
Composite or PVC deckingBoards by lengthSpecial order by color for one deckLogged as materials on the day's job
Fascia, joist tape and flashingPieces and rollsYard order or shop stockLogged as materials, or checked out of the warehouse
Joist hangers, structural screws and lag screwsBoxes or eachShop stockChecked out of the warehouse against the job
Hidden fastenersBoxes, matched to the board countShop stockChecked out of the warehouse against the job
Railing posts, rails and infillLinear feet, plus posts and gatesOrdered for the deckLogged as materials on the railing day's job
Footing concreteBags or yardsYard delivery or shop stockLogged on the footing day's job

Warehouse checkout counts stock where it sits, so the boxes of hangers that leave for one deck come off the shelf count when they leave. Low-stock warnings flag hardware before a busy week empties a shelf. Site-delivered lumber never passes the shelf; the lead carpenter logs what was used on the day's job, and materials tracking carries it into job costing. Composite boards ordered by color have no second use if the deck is cancelled, and the money a contractor may take before placing that order is set by state law, as the Maryland section below shows.

Permit fees and inspection lines

The building permit is a cost the contractor pays to the jurisdiction and recovers from the homeowner. On the estimate it sits as its own line at cost, separate from any charge for the contractor's time to draw the plan and file the application. Where a jurisdiction charges for a failed inspection, the reinspection fee is a further line, and the photos that show what failed explain it to the homeowner.

FieldRanger does not file permits. The office enters the permit number on the deal, as a FieldRanger field mapped to a HubSpot custom property, and the fee as a line on the estimate built on the HubSpot deal or in FieldRanger. Each inspection's outcome sits on the work order of the day it closed, with the photos taken for it.

Maryland's one-third deposit limit

Maryland's home improvement law sets the limits on money taken before the work. Business Regulation section 8-617 states that "A person may not demand or receive any payment for a home improvement before the home improvement contract is signed". It adds that "A person may not receive a deposit of more than one-third of the home improvement contract price before or at the time of execution of the home improvement contract" (Md. Code, Bus. Reg. § 8-617, checked November 2026).

The contract that the deposit depends on has required contents. Section 8-501 requires it to be written and signed by each party. It states "the agreed consideration" and "a description of the home improvement to be performed and the materials to be used". It gives the approximate dates when work will begin and be substantially completed, and the contractor's license number (Md. Code, Bus. Reg. § 8-501, checked November 2026). On a $30,000 deck contract, as an example, the deposit at signing can be no more than $10,000, and nothing can be taken before the signature.

In FieldRanger, the estimate on the HubSpot deal holds the materials description and the price the contract states, and PandaDoc sends the contract for signature. The signed date on the deal is the earliest date any payment can be taken. FieldRanger sends a deposit invoice before the job and invoices the balance on completion, so a Maryland deck builder bills the deposit, no more than one-third of the price, once the contract is signed.

Deck build days and their billing events

An example six-day composite deck under a Maryland contract
DayWorkMaterials logged on the day's jobBilling event
SigningContract signed through PandaDocNoneDeposit invoice for no more than one-third
1Footing holes, then the footing inspectionForm tubes, gravelNone
2Concrete and postsConcrete, post bases, postsNone
3 and 4Framing, ledger and flashingJoists, beams, hangers, lag screws, flashing, joist tapeNone
5DeckingComposite boards, hidden fasteners, fasciaNone
6Railing, stairs and final inspectionRailing posts, rails, infill, stair treadsBalance due after final approval and the homeowner's signature

The schedule is the example's; the deposit limit is Maryland's. Each day's work order closes with that day's materials and hours. FieldRanger has no progress billing, so it does not bill a share of the contract at footings, framing and decking; the balance is invoiced on completion, after the final inspection. The day-by-day record holds what each day consumed, which is what job costing sets against the estimate.

A change found mid-build, such as rotted rim joists under an old deck being rebuilt, adds lines of its own. The revised estimate on the same deal is signed through PandaDoc before the work, and the added joists and hangers are logged on the day they are installed.

Repair visits and yearly sealing

Repair work bills one visit at a time. A visit that replaces six boards or a rotten stair tread is one job and one invoice, billed from the materials used and the time on site. The same single-visit bill is set out in detail on handyman invoicing software.

Yearly cleaning and sealing visits sit on recurring job templates, so last season's decks return to the calendar each spring. Each visit is invoiced from its own completed work order. A maintenance customer can be charged automatically to a card on file; otherwise the technician takes payment through Stripe at the visit, or the invoice is settled later and the payment syncs with QuickBooks.

Payment, QuickBooks and margin by deck type

At the final inspection, the homeowner signs on the lead carpenter's phone and the last photos attach to the work order. Payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks. Each completion and its photos are logged to the homeowner's HubSpot timeline, and job status shows on the deal.

Revenue reports show job revenue and margin by service type, so composite builds, wood builds, railing jobs and repairs can be compared. A composite build whose hardware ran past the estimate shows it in the logged materials; the margin report shows what it cost. The HubSpot side of the job is described under HubSpot field service.

Deck billing limits in FieldRanger

  • Progress billing and retainage are not built.
  • No permit filing; the permit number and fee are entered by the office.
  • No board or hardware takeoff from a drawing.
  • No multi-day jobs: each build day is its own job.

Frequently asked questions

What is deck builder invoicing software?

Software that bills a deck job: framing lumber, decking, railings, hardware, the permit fee and labor. FieldRanger generates each invoice from a completed work order and keeps it on the homeowner's HubSpot deal with the photos and payment.

How much deposit can a deck builder take in Maryland?

Under Business Regulation section 8-617, no payment may be taken before the home improvement contract is signed, and the deposit may not exceed one-third of the contract price before or at signing.

Should a deck invoice list lumber and composite boards separately?

Separate lines show the homeowner what was bought for the deck and let the contractor cost each material. In FieldRanger, site-delivered lumber and boards are logged as materials on the day's job, and hardware is checked out of the warehouse.

How are permit fees billed on a deck job?

The permit fee is a line at cost, kept apart from the contractor's charge for drawing and filing. FieldRanger does not file permits; the office records the permit number on the HubSpot deal and the fee on the estimate.

Can deck builder invoicing software bill progress payments?

FieldRanger has no progress billing or retainage. It sends a deposit invoice before the build and invoices the balance on completion, and each build day is its own job with its own work order.

Does deck builder invoicing software work with QuickBooks and HubSpot?

FieldRanger syncs invoices and payments with QuickBooks and logs each day's completion and photos to the homeowner's HubSpot record.

Under Maryland's law a deck builder is paid nothing before the contract is signed and no more than a third of the price at signing; the rest follows the build days. FieldRanger records each of those days, with its lumber, hardware and hours, on the HubSpot deal the deck was sold from. The build itself is covered on deck builder software, single-visit repair bills on handyman invoicing software, and per-technician plans on pricing, where a 14-day Start free trial asks for no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo