Industry
Excavation Software:FieldRanger for Excavation and Site Work on HubSpot
Excavation software on HubSpot: FieldRanger runs trenching, site work and hydrovac crews with locate tickets, trench checklists, machine bookings and fuel logs.
Excavation software runs an earthmoving contractor's jobs from bid to invoice: the utility locate, the crew and machines for the day, the trench inspection, the loads hauled and the hours worked. FieldRanger does this inside HubSpot, where the general contractor, developer, utility or homeowner who ordered the dig already has a record.
Excavation is one of the trades in field service software by industry, and its jobs are short next to the projects they serve. A sewer lateral, a footing dig or a pothole over a gas main can be one day of a build that lasts months. Excavation management software is judged on that day: whether the ticket is clear, the trench box is on the trailer, the competent person is on the crew and the hours land on the right job.
Site work, trenching, hydrovac and earthworks jobs
Excavation company software has to hold several kinds of job, each bid in its own unit. Site work clears and grades a lot, bid by the acre or the day. Trenching opens a run for water, sewer, power or drainage at a set depth, bid by the linear foot. Earthworks moves soil in cut and fill, bid by the cubic yard. Hydrovac, or hydro excavation, exposes buried lines with pressurized water and a vacuum truck, bid by truck hours. Demolition and haul-off add truckloads and disposal.
The customer changes with the job. A general contractor orders the footing dig, a plumber or a utility contractor orders the trench, a developer orders the grading, and an HVAC contractor orders the loop field for a geothermal heat pump; that side of the work is covered on HVAC software. In FieldRanger each customer is a HubSpot company with its contacts. Revenue reports show job revenue and margin by customer or service type, so trench work for plumbers and grading for developers can be compared line by line.
Utility locates under 811 and Ohio's one-call law
Every dig starts with the locate. OSHA's excavation rules require that "the estimated location of utility installations" be determined before an excavation is opened, and that utility owners be contacted "within established or customary local response times" (OSHA, 29 CFR 1926.651, checked November 12, 2026). Dialing 811 reaches the state's one-call center. In Ohio that center is OHIO811, which takes professional tickets through its i-dig web entry (OHIO811, checked November 12, 2026).
Ohio's statute sets the notice window. The excavator notifies the protection service "at least two working days, not including the day of the notification, but not more than sixteen calendar days before commencing excavation" (Ohio Revised Code 3781.28, effective June 9, 2026). The tolerance zone is the width of the facility "plus eighteen inches on each side". Digging inside it in a "nondestructive manner" means "low-impact, low-risk technologies such as hand tools" "or hydro or air vacuum excavation equipment" (ORC 3781.25, effective June 9, 2026). Powered equipment in the zone needs "an individual other than the equipment operator, to visually monitor the excavation activity", and the excavator must "protect and preserve the markings" while they are still needed (ORC 3781.30, effective June 9, 2026).
Hydrovac excavation software follows from that definition. In Ohio, vacuum excavation is a named nondestructive method inside the tolerance zone, so a hydrovac truck can expose the gas service before the excavator opens the trench on the same job. In FieldRanger the ticket number goes on the job's checklist, and the dispatcher sets the dig date inside the statutory window. Before the first bucket, the crew photographs the locator's marks onto the work order. The spotter's name goes on the checklist as well, and one FieldRanger job can carry several technicians, so the operator and the spotter work the same job. FieldRanger has no connection to OHIO811 or any other one-call center, so the office requests tickets directly.
OSHA Subpart P trench rules on the daily checklist
OSHA's excavation standard, 29 CFR 1926 Subpart P, reduces to a short list of checks for each trench. "Each employee in an excavation shall be protected from cave-ins by an adequate protective system", unless the excavation is "made entirely in stable rock" or is "less than 5 feet (1.52m) in depth" and a competent person's examination shows no indication of a cave-in (OSHA, 29 CFR 1926.652, checked November 12, 2026). Section 1926.651 adds three more. A trench "4 feet (1.22 m) or more in depth" needs a stairway, ladder or ramp within "25 feet (7.62 m) of lateral travel". Spoil and equipment stay "at least 2 feet (.61 m) from the edge". A competent person inspects the excavation daily, "prior to the start of work", and again after every rainstorm.
FieldRanger's custom checklists hold those items as the first entries on each day's work order: depth, the protective system in place (trench box, shoring or sloping), the ladder position, the spoil setback, and the competent person's name and inspection time. A photo of the box set and the ladder in place attaches to the work order. Skill-based assignment matches jobs to technicians by certification and expertise, so a trench job goes only to a technician recorded as a designated competent person. After overnight rain the dispatcher adds the re-inspection before anyone enters the trench, because FieldRanger has no weather feed to prompt it.
Excavators, trench boxes and haul trucks on the equipment calendar
Excavation business software books machines the way it books people. An excavator, a skid steer, a compactor or a trench box can be booked to only one job at a time on FieldRanger's equipment availability calendar, which shows the open days for each. Scanning a machine's QR code at the yard gate checks it out to the crew, and the usage history lists every crew that has run it. Depreciation tracking follows each machine's value toward its replacement.
Trucks move the machines and the dirt. The dump trucks, the lowboy tractor and the hydrovac truck are vehicles in FieldRanger, with real-time GPS location on a live map, maintenance reminders and digital pre-trip and post-trip inspection checklists.
Equipment hours, fuel and job cost
Whatever unit the bid uses, the cost underneath it is machine time: operator hours and diesel. Operator hours come from FieldRanger's geo-location time tracking: each clock-in records where the operator was, so hours match job sites. BLS puts the May 2025 median wage of operating engineers and other construction equipment operators at $28.78 an hour, with national employment of 478,090 (BLS, Occupational Employment and Wages, May 2025, released May 15, 2026). On-highway diesel averaged $6.127 a gallon nationally in the week of November 9, 2026, by EIA's count (EIA, gasoline and diesel fuel update, released November 10, 2026).
Fuel monitoring tracks fuel use across the trucks and flags waste. Engine hours for service intervals and for billing are read from the meter by the operator and recorded on the job, and equipment maintenance schedules and tracks the service itself. Stone, fill and pipe are logged as materials used on each job for job costing, with the scale tickets photographed onto the work order. Revenue reports then set each job's revenue against its hours, materials and haul.
A sewer lateral replacement across one working week
The table follows a residential sewer lateral ordered by a plumbing contractor in Ohio, with the record each day leaves.
| Day | Work | Record |
|---|---|---|
| Previous week | Site visit and bid | Photos of the cleanout, the drive and machine access; estimate on the HubSpot deal; PandaDoc signature; won deal becomes the job |
| Monday | Locate requested through OHIO811 | Ticket number on the job checklist; dig date set no earlier than Thursday |
| Wednesday | Machines booked and loaded | Mini excavator and trench box on the equipment calendar; dump truck assigned; pre-trip inspections |
| Thursday | Hydrovac exposes the gas service; excavator opens the trench | Photos of the marks; competent person's inspection; trench box checked out by QR code; located clock-ins |
| Friday | Pipe laid, inspected, backfilled | Inspection photo; stone logged as material; plumber's signature; invoice from the completed work order |
The job status shows on the HubSpot deal throughout, for the plumber who ordered the trench. The invoice is paid by card through Stripe or carried on terms, invoices and payments sync with QuickBooks, and completions, notes and photos are logged to the HubSpot timeline. The record model behind that is described under HubSpot field service. Moving a crew when Thursday's locate is not marked in time is a board problem, covered on dispatch software.
Excavation takeoff, machine control and other software
Excavation takeoff software measures cut and fill volumes, trench lengths and areas from plans or surfaces, and machine control guides a blade or bucket to a design grade. FieldRanger does neither. A contractor bidding from plans runs a takeoff product, then enters the quantities in the estimate on the HubSpot deal or in FieldRanger; excavation estimating software covers that step. Earthworks excavation software for mass grading belongs with those takeoff and grade-control tools.
FieldRanger is software for excavation business owners whose jobs last days rather than seasons and are sold through HubSpot to the contractors and owners who order them. Software for an excavation company running highway or site-development contracts measured in months needs project controls, progress billing and takeoff that FieldRanger does not provide.
Excavation work outside FieldRanger
- No quantity takeoff from plans and no machine control.
- No connection to 811 one-call centers; the office requests each ticket.
- No weather feed; rain re-inspections and frozen-ground delays are set by the dispatcher.
- No percent-complete or pay-application billing; invoices follow completed work orders.
Excavation guides and related pages
The excavation business guide covers starting and growing the company, and excavation business insurance covers the policies an excavation contractor carries. Clearing a structure before the dig is the subject of demolition business. Bids and quantities are covered on excavation estimating software.
Frequently asked questions
What is excavation software?
Software that runs excavation jobs from bid to invoice: locate tickets, crew and machine scheduling, trench inspection records, hours, materials and billing. FieldRanger does this inside HubSpot, on the records of the contractors and owners who order the work.
What software does an excavation company need?
Estimating and takeoff for the bid, scheduling for crews and machines, records for locates and trench inspections, time and equipment tracking, and invoicing. FieldRanger covers the jobs from won deal to invoice inside HubSpot; takeoff comes from a separate product.
What is hydrovac excavation software?
Software that schedules vacuum excavation trucks and records each exposure: the locate ticket, the line found, the photos and the truck's hours. In FieldRanger the hydrovac truck is a GPS-tracked vehicle and each exposure is a job with its own checklist.
How many days notice does Ohio require before digging?
Ohio Revised Code 3781.28 requires notice to the protection service at least two working days before excavation, not counting the day of notice, and not more than sixteen calendar days before.
When does OSHA require a trench box or other protective system?
Under 29 CFR 1926.652, an excavation 5 feet deep or more needs a protective system unless it is entirely in stable rock, and a shallower one needs it when a competent person finds signs of a possible cave-in.
Does FieldRanger do excavation takeoff?
No. Quantities come from a takeoff product or a site measurement and are entered in the estimate on the HubSpot deal or in FieldRanger.
How much does excavation software cost?
FieldRanger plans are per technician and listed on the pricing page; the trial covers 14 days and takes no card.
An excavation job in FieldRanger carries its locate ticket, the competent person's checks and each operator's located hours from the first photo of the paint to the signed invoice, all on the HubSpot record of whoever ordered the dig. Bidding is covered on excavation estimating software, the other trades under field service software by industry, and pricing is where Start free trial gives a crew 14 days on FieldRanger before any card is needed.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo