Industry
Public Works Fleet Management Software:Vehicle Assignment, Service Records and Mileage Logs for Municipal Fleets
Public works fleet management software on HubSpot: FieldRanger records who drives each unit, its odometer, its service history and pre-shift inspections.
Public works fleet management software keeps the record a city or county owes for each vehicle it owns: the driver or department it is assigned to, the miles it ran, the service it received and the inspection before each shift. FieldRanger keeps that record in HubSpot, beside the work orders each truck is sent to complete.
The work orders themselves are covered under public works work order software. Public works fleet software differs from a fleet shop system in where it starts. A shop system starts at the mechanic's bay, with parts, labor and fuel tickets. FieldRanger starts at the job: which unit went to which street, with which driver, and what the unit needs before it goes out again. That difference decides which product fits a department, as the comparison further down sets out.
Vehicle classes and minimum use under Washington's fleet procedure
Washington's Department of Enterprise Services sets the rules for permanently assigned state vehicles in Procedure BR.01.01.P1, last updated December 1, 2025 (Washington DES, Permanently Assigned Motor Vehicles). Each vehicle class carries a minimum annual use. A vehicle below it stays assigned only after the DES director approves a justification.
| Class | Examples in the procedure | Annual requirement |
|---|---|---|
| Special purpose | Cargo trucks and vans, step vans, crew buses, ¾-ton or larger vehicles with towing capacity and a specialized use | Mileage exempt |
| Specially equipped | Vehicles with interior racking, bins for parts and tools, or water deployment equipment | 4,000 miles |
| Local area | Vehicles working within one city or county on short, frequent trips | 4,000 miles and use on 75% of working days |
| Campus, institution, park or hatchery | High trip volume over short distances | 2,000 miles or use on 80% of working days |
| General use | All other assigned vehicles with statewide travel | 10,000 miles |
Use is measured over a two-year cycle. The procedure's own example: a general-use vehicle must cover at least 20,000 miles between January 1, 2025 and December 31, 2026. A vehicle that falls short gets a grace period from March to May, and it stays assigned if it reaches 25 percent of the annual requirement in that window. Otherwise the agency returns it to State Fleet Operations or asks for a waiver. Waiver requests go in between January and June of odd-numbered years. Each listed vehicle carries its plate, year, make and model, location, category, annual mileage or days used, and the justification for keeping it.
FieldRanger holds the inputs to that list. Mileage tracking logs each vehicle's odometer for expense reports and IRS mileage records. Vehicle assignment records which technician has which unit and shows the units that are free. Utilization reports give each vehicle's usage rate, so a pickup heading below its class minimum is visible before the grace period starts, and any report downloads as CSV or Excel for the waiver memo. The category column and the justification remain the agency's to write.
Take-home units, commuting value and the mileage log
The same procedure states that permanent assignment "is not itself sufficient justification" for driving the vehicle between home and the duty station. The agency head may approve home storage for listed reasons: storage at home costs the state less than a garage, the home is the official station, a trip starts before the fleet yard opens or ends after it closes, or returning the vehicle raises a safety concern. Emergency highway maintenance employees on 24-hour call are exempt, provided their actual off-duty calls average at least 10 a month over the calendar year.
Federal tax rules decide whether the commute is income. IRS Publication 15-B for 2026 lists qualified nonpersonal use vehicles, whose personal use is not counted as a fringe benefit. The list includes clearly marked police, fire and public safety vehicles; dump trucks, including garbage trucks; bucket trucks, cranes and derricks; flatbed trucks; qualified specialized utility repair trucks; and cargo vehicles over 14,000 pounds loaded gross weight (IRS Publication 15-B (2026)). A pickup or van of 14,000 pounds or less qualifies only when it is clearly marked and specially modified, such as a pickup with a hydraulic lift gate or permanent tanks, or a van with permanent shelving across the cargo area.
For a sedan or SUV taken home, the commuting rule values each one-way commute at $1.50. The rule requires a written policy that bars personal use beyond commuting and de minimis use, and it is unavailable for a control employee: for a government employer, an elected official or an employee paid at or above Federal Executive Level V. Business use is substantiated by mileage, time, place and purpose, and the publication names records written at the time of each use as the best evidence.
In FieldRanger that evidence accrues as the work is done. Each job carries an address and a time. Clock-ins and clock-outs record where the technician was; route history keeps each day's route; the odometer log closes the day. An after-hours call-out to a water main break is a job with its own clock-in, so the off-duty calls that justify a take-home truck are jobs, and a custom report counts them by month.
Preventive maintenance by vehicle type and mileage
Washington's Fleet Operations states that "Maintenance should occur at scheduled intervals based on the vehicle type and mileage." Any maintenance over $100 performed by a vendor must be pre-authorized, and a vehicle serviced outside the state shop is reported to the Maintenance Office so its reminders stay accurate (Washington DES, Fleet Services and Repairs, checked November 12, 2026). The last rule exists for a mechanical reason: a service done elsewhere and never recorded leaves the next reminder counting from the wrong date.
FieldRanger keeps two kinds of maintenance record, matching the two kinds of unit a public works yard runs:
- Road vehicles: maintenance scheduling sends reminders for oil changes, inspections and repairs, maintenance history keeps the service record of every vehicle, and fuel monitoring tracks each truck's fuel use.
- Off-road equipment: asset tracking schedules and tracks maintenance for each mower, generator, trailer-mounted pump or plow blade, records QR code check-in and check-out, and follows each asset's value toward replacement with depreciation tracking.
A repair done by an outside vendor goes into the vehicle's maintenance history like any other service.
Federal driver rules and the government exemption
The federal motor carrier safety regulations largely stop at public fleets. Under 49 CFR 390.3T(f)(2), the rules in that subchapter do not apply to "Transportation performed by the Federal government, a State, or any political subdivision of a State". Paragraph (b) keeps one part in force: the commercial driver's license rules of part 383 "are applicable to every person who operates a commercial motor vehicle", and to all employers of such persons (49 CFR 390.3T, Cornell LII, checked November 12, 2026).
A county's tandem dump truck therefore sits outside the federal annual inspection rule, while its driver still holds a CDL. The daily walkaround is the department's own policy, or a state rule where the state adds one. FieldRanger's digital pre-trip and post-trip inspection checklists carry that policy onto the driver's phone. A defect noted at the end of a shift becomes a repair on the maintenance schedule before the truck goes out again.
Skill-based assignment matches jobs to technicians by certification, so a tandem plow route goes only to a driver set up with a CDL. When a license lapses, the office removes the certification in FieldRanger until it is renewed.
Live location, alerts and public scrutiny
A municipal truck is public property on a public street, and residents report what they see. Vehicle tracking shows every vehicle's real-time GPS location on a live map. Fleet alerts flag speeding, geofence exits and idle time: a sweeper idling outside a coffee shop, a pickup crossing the county line after hours, a plow running above the posted speed. Each alert is a dated record the superintendent can answer a complaint with, and route history shows where the unit was during the hour in question.
A pre-season check of the plow fleet
- In October, the fleet supervisor creates a recurring job template for the pre-season check and schedules one job per plow truck in a single pass with bulk scheduling.
- Each check lands on the drag-and-drop calendar of the mechanic assigned to it, and conflict detection warns when a mechanic is double-booked.
- The work order carries a checklist for the plow hitch, cutting edge, spreader, hydraulics, lights and chains. The mechanic photographs the cutting edge before and after replacement.
- A failed item raises a repair through maintenance scheduling, and the completed repair joins the truck's maintenance history.
- Vehicle assignment pairs each CDL driver with a unit for the season, and the units left over show as spares.
- After the first storm, the odometer logs and the utilization report give miles per unit; the export goes into the storm cost report. A truck with no miles in a storm week is either a spare or a problem, and the record shows which.
Fleet shop systems compared with FieldRanger
Fleetio presents its government fleet software with automated PM schedules "by time, meter or mileage", integrations with fuel cards, telematics and GPS systems, and digital DVIRs (Fleetio, government fleet software, checked November 12, 2026). The page does not mention HubSpot. A department that runs its own garage, stocks a parts room, charges departments for vehicle use and reconciles fuel card transactions is better served by a system built around the shop, such as Fleetio.
FieldRanger fits where the fleet serves dispatched field work: a streets, water or parks division whose trucks go where work orders send them, or a contractor holding a municipal maintenance contract. For the contractor, the contract is a HubSpot deal; once won, it becomes a job with its context carried over, completions are logged to the HubSpot timeline, and invoices from completed work orders sync to QuickBooks. Contractors whose yards hold excavators and lowboys beside the trucks are covered on construction fleet management software, where engine hours matter as much as miles.
Frequently asked questions
What is public works fleet management software?
Software that records each municipal vehicle's assignment, mileage, inspections, service history and location. FieldRanger keeps those records beside the work orders the vehicles serve, inside HubSpot.
What is the difference between public works fleet software and fleet maintenance shop software?
Fleet software for field operations tracks where units go, who drives them and when service comes due. Shop software adds repair orders, parts rooms, fuel card feeds and chargebacks to departments. FieldRanger is the first kind; a department running its own garage pairs it with the second or chooses the second instead.
Do municipal dump truck drivers need a CDL?
Government transportation is excepted from much of the federal motor carrier safety regulations under 49 CFR 390.3T(f)(2), but the CDL rules of part 383 still apply to every person who operates a commercial motor vehicle. FieldRanger's skill-based assignment keeps CDL work with drivers set up as holding one.
Is a take-home public works truck a taxable fringe benefit?
Not when it is a qualified nonpersonal use vehicle under IRS Publication 15-B, a list that includes dump trucks, bucket trucks and qualified specialized utility repair trucks. A take-home sedan or SUV is valued under the commuting rule at $1.50 per one-way commute for employees who are not control employees.
How many miles must a state vehicle be driven per year?
Each state sets its own minimum. Washington's Procedure BR.01.01.P1 requires 10,000 miles a year for a general-use vehicle, 4,000 for specially equipped and local-area vehicles, and exempts special purpose vehicles such as cargo trucks.
Does FieldRanger read fuel card transactions?
No. FieldRanger's fuel monitoring tracks fuel use by vehicle; fuel card transactions stay with the card program or a shop system such as Fleetio.
Washington's first waiver window under the two-year rule opens in January 2027, and each underused vehicle will need its miles, its days in use and a reason it stays; in FieldRanger the odometer log, the assignment history and the service record are already filed against the unit. Requests and crews are under public works work order software, contractor fleets under construction fleet management software, and the per-technician plans on pricing, where Start free trial runs 14 days without a card.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo