Industry

Construction Fleet Management Software:Trucks and Equipment in FieldRanger and HubSpot

Construction fleet management software on HubSpot: FieldRanger tracks trucks by GPS, checks equipment out by QR code and schedules service for every unit.

Updated 6 min read

Construction fleet management software keeps the records of a builder's trucks, trailers and heavy equipment: location, current job, last inspection and next service. FieldRanger keeps those records beside the jobs in HubSpot: trucks on a live GPS map, equipment checked out by QR code, every unit assigned to the job it serves.

A construction fleet has two halves, and fleet software written for trucking covers one of them. The on-road half is pickups, crew cabs, dump trucks and the tractor that pulls the lowboy, and it is measured in miles. The off-road half is excavators, skid steers, compact track loaders, rollers and light towers, measured in engine hours and moved on a trailer. Fleet records are one part of general contractor software, and fleet management software for construction has to hold both halves. FieldRanger does, within the limits set out below.

Vehicles, machines and small equipment as FieldRanger records

FieldRanger keeps two kinds of record, and a construction fleet needs both.

Vehicles sit in the fleet records. Each truck has its real-time GPS location on the live map, an assigned driver, an odometer log, a maintenance history and digital pre-trip and post-trip inspections. Vehicle assignment shows which trucks are free. Utilization reports show usage rates, so a pickup parked at the yard for a month shows up before the next one is bought.

Machines and small equipment sit in the asset records. Asset tracking records where each piece is, and QR code check-in and check-out records who took it and when. The same records cover a breaker attachment, a plate compactor, a generator and a laser level, the items that leave a job in the wrong truck. Equipment categories organize assets by type, location and department, so a contractor with a site division and a utility division sees each yard's equipment apart.

534,100

construction equipment operator jobs in the U.S. in 2025Source: BLS Occupational Outlook Handbook, modified October 29, 2026

The Bureau of Labor Statistics lists "Clean and maintain equipment, making basic repairs as necessary" among an operator's duties. It also notes that operators "may have irregular schedules, such as continuing around the clock or late into the night" (BLS Occupational Outlook Handbook, modified October 29, 2026). A machine that runs a night pour is due for service on the hours it ran, whatever the calendar says.

Shift checks under OSHA and FMCSA rules

Construction vehicles answer to two sets of inspection rules, depending on where they drive.

On the jobsite, OSHA's motor vehicle rule covers vehicles "that operate within an off-highway jobsite, not open to public traffic". Each vehicle in use is checked "at the beginning of each shift": service brakes including trailer brake connections, the parking system, emergency stopping, tires, horn, steering, coupling devices, seat belts, operating controls and safety devices. The rule adds that "All defects shall be corrected before the vehicle is placed in service" (29 CFR 1926.601, checked November 2026). Earthmoving equipment falls under a separate section: scrapers, loaders, bulldozers, off-highway trucks and graders. A machine with an obstructed rear view needs a reverse signal alarm, or a spotter who signals (29 CFR 1926.602, checked November 2026).

On the highway, weight decides. A dump truck, or a pickup pulling an equipment trailer, used in interstate commerce at 10,001 pounds or more of gross vehicle or combination weight rating is a commercial motor vehicle (49 CFR 390.5, checked November 2026). Each such vehicle needs an inspection at least once in the preceding 12 months, with documentation on the vehicle (49 CFR 396.17, checked November 2026).

FieldRanger's digital pre-trip and post-trip inspection checklists put the truck list on the driver's phone at the start and end of the day. For machines, a job-specific checklist on the work order carries the operator's walkaround. The office schedules the repair for any defect noted on either, and the service joins the unit's maintenance history.

Equipment on the schedule and on the trailer

An excavator can be on one job at a time, and the schedule has to know it. The equipment availability calendar shows when each machine is free and prevents double-booking, and equipment assignment attaches the machine to the job and the operator. When the superintendent moves a footing job, the dispatcher drags it to the new date on the calendar and checks the machine's availability for that date.

The move itself is work. Hauling a track loader to the next site on a lowboy is a job of its own: a truck, a driver and a route. FieldRanger builds the driver's route for the day automatically. Fleet alerts flag speeding, geofence exits and idle time. A truck that leaves a defined area after hours, or idles at a site for an hour, appears on the alert list instead of in next month's fuel bill.

Construction fleet maintenance by miles, hours and dates

Construction fleet maintenance software works on three clocks: miles for trucks, engine hours for machines and dates for annual inspections. FieldRanger covers them in two places.

  1. Vehicle maintenance scheduling sends reminders for oil changes, inspections and repairs, and each completed service joins the truck's maintenance history.
  2. Equipment maintenance schedules and tracks service for each machine and attachment, from a skid steer's hydraulic service to a generator's oil change.
  3. Fuel monitoring tracks fuel use by vehicle, and utilization reports set it against usage, so a truck that burns more than its peers on similar routes stands out.
  4. Depreciation tracking follows each asset's value toward its planned replacement.

The replace-or-keep decision draws on all four records. The tax side runs in the books. For tax years beginning in 2026, the Section 179 expensing limit is $2,560,000, reduced dollar for dollar once qualifying property placed in service exceeds $4,090,000 (IRS Rev. Proc. 2025-32, October 2025). FieldRanger's depreciation record serves replacement planning; the tax election belongs to the accountant.

Fleet records, job cost and the HubSpot deal

A construction job starts as a HubSpot deal. The estimate is built on the deal or in FieldRanger and stays tied to it. Pricing equipment and trucking on that estimate is covered on the construction estimating software page. A won deal becomes a job with its context carried over, and the equipment assigned to the job is visible from the job record.

On site, materials tracking logs the parts and materials used on each job for job costing. Clock-ins and clock-outs record where each operator was, so hours match the site; the construction time tracking software page covers crews and hours. Job status shows on the HubSpot deal, and completions and notes are logged to the timeline. Revenue reports show job revenue and margin by customer or service type.

Telematics, ELD and fuel tax reporting beyond FieldRanger's scope

  • Electronic logging for hours of service, IFTA fuel tax reporting, dashcams and engine fault codes come from a telematics or ELD provider.
  • A heavy civil contractor with a large owned fleet and a full-time equipment manager is better served by dedicated equipment management software, with FieldRanger or another tool scheduling the field work.

Frequently asked questions

What is construction fleet management software?

Software that keeps the records of a contractor's trucks, trailers and heavy equipment: location, assignment, inspections, maintenance, fuel and value. FieldRanger keeps them beside the jobs each unit serves, with the jobs tied to HubSpot deals.

What is construction fleet maintenance software?

Software that schedules service for trucks by miles, machines by hours and inspections by date, and keeps the service history of each unit. In FieldRanger, vehicle maintenance reminders and equipment maintenance schedules hold both histories.

What is the difference between fleet management and construction equipment management software?

Fleet management covers on-road vehicles: GPS location, drivers, mileage and roadside inspection rules. Construction equipment management covers machines and tools: availability, assignment to jobs, check-out, engine-hour service and value. FieldRanger has records for both.

Do construction vehicles need daily inspections?

OSHA requires vehicles in use on an off-highway jobsite to be checked at the beginning of each shift, with defects corrected before use. Commercial motor vehicles on public roads also need an annual inspection documented on the vehicle.

How do construction companies track heavy equipment across job sites?

With a record per machine that shows its current job, its operator and its next free date. In FieldRanger, equipment assignment and the availability calendar hold that record, and QR check-in and check-out log every move of smaller equipment.

Does construction fleet management software work with HubSpot?

FieldRanger runs inside HubSpot. Won deals become jobs, equipment and trucks are assigned to those jobs, and job status and completions return to the HubSpot deal and timeline.

One FieldRanger job holds the footing crew, its excavator, the lowboy that moved it and the inspection done before the first bucket; the HubSpot deal that sold the work holds the job. The wider construction workflow is under general contractor software, crew hours are on construction time tracking software, and pricing shows the plans; Start free trial gives 14 days without a card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo