Industry
Irrigation Estimating Software:Irrigation Estimates in FieldRanger and HubSpot
Irrigation estimating software on HubSpot: zones from available flow, heads by spacing, pipe feet, valves, controller and backflow lines, priced in FieldRanger.
Irrigation estimating software prices a sprinkler or drip installation from its parts and labor: heads and nozzles, zones and valves, feet of pipe and wire, the controller and the backflow assembly. FieldRanger keeps that estimate on the HubSpot deal or in FieldRanger, and turns the won deal into the installation job.
Estimating is the sales step of irrigation service software. Design software draws the system and runs the hydraulics. The estimate turns that design, or the estimator's own sketch, into a count of parts and crew hours with a price on each line. The arithmetic starts with the water supply, because the supply decides how many zones the yard needs.
Available flow, static pressure and the zone count
Rain Bird's Landscape Irrigation Design Manual sets three limits on the supply. Pressure loss through the water meter stays within 10 percent of the minimum static pressure in the main. Irrigation flow through the meter stays within 75 percent of the meter's maximum safe flow. Velocity in the service line stays within 5 to 7.5 feet per second. The lowest of the three flows becomes the system's capacity (Rain Bird, Landscape Irrigation Design Manual, copyright 2000, checked November 12, 2026).
The manual's own example shows how far apart the three limits can sit. A 3/4-inch meter on a main at 111 psi allows 24 gpm under the first rule and 22.5 gpm under the second. Its 3/4-inch copper service line allows only 10 gpm under the 7.5 feet per second limit, so 10 gpm becomes the design capacity. The zone count follows from division: the combined flow of the heads, divided by that capacity and rounded up, is the fewest zones the supply allows.
The site visit therefore records the static pressure, the meter size and the service line before anything else. In FieldRanger those readings go on the visit's checklist, and photos of the meter's size stamp and the point of connection attach to the work order.
Heads, nozzles and spacing on the estimate
Head count follows from spacing. Rain Bird states that "Head-to-head, or 50% sprinkler spacing, is the most common spacing used in landscape irrigation", with spacing as close as 40 percent where wind threatens coverage (Rain Bird, Landscape Irrigation Design Manual, checked November 12, 2026). Head-to-head means each head throws to its neighbors, so 15-foot nozzles sit 15 feet apart.
The same manual's 15 Series table gives the flows that fill each zone. At 30 psi a 15 Series nozzle throws 15 feet and flows 3.70 gpm on a full circle, 1.85 gpm on a half and 0.93 gpm on a quarter (Rain Bird manual, 15 Series nozzle table, checked November 12, 2026). Corners take quarters, edges take halves, and the interior takes full circles.
The circuiting rule then separates head types. Sprinklers with different precipitation rates go on different valves, and drip emitters and sprinklers never share a valve. A lawn of sprays, a bed of drip and a slope of rotors are three zones before any flow is counted.
Valves, pipe footage and wire
Two of the manual's rules size each valve. The loss through the valve at the zone's flow stays within 10 percent of static pressure. The valve matches the largest pipe in its lateral, or is one nominal size smaller. Oversizing carries its own risk: the manual notes that automatic valves use the pressure difference across them to open and close, and a valve too large for its flow may not operate at all.
Pipe is counted in feet, by size and class, from the plan. Mainline pipe is under constant pressure and needs a strong wall; Rain Bird's sample mainline is Schedule 40 PVC, sized for its flow at 5 feet per second or less. Lateral pipe runs from each valve to its heads. Valve wire runs from the controller to each valve, with one common wire shared by all of them, and the manual sizes valve and power wire as its own step.
Fittings, swing joints, valve boxes and wire connectors are counted per head and per valve. Each count becomes an estimate line with a quantity the crew can check against what it installs.
Controller and backflow lines
The controller line follows the zone count: one station per zone at minimum, and spare stations for the bed a homeowner adds later. Rain Bird's store lists the ARC8 smart controller, 8 stations, at $122.99 and the ARC4, 4 stations, at $104.99 (Rain Bird store, timers and controllers, checked November 12, 2026).
The backflow assembly is set by code rather than by preference. Rain Bird's manual states that local codes prevail on the type and size of device, and that quite often the code requires it to match the nominal size of the service line or point of connection (Rain Bird, Landscape Irrigation Design Manual, checked November 12, 2026). Where the state or the water purveyor requires a test at installation, the test by a licensed tester is a line of its own. The Texas licensing and testing rules are summarized on the irrigation service software page.
Sample estimate: one 30 by 45 foot lawn on a 10 gpm supply
The sample prices a rectangular front lawn of 30 by 45 feet on the supply from Rain Bird's example, 10 gpm. The lawn size, the pipe footage and the crew hours are sample inputs. Flows come from Rain Bird's nozzle table, part prices from Rain Bird's store, and the wage from the Bureau of Labor Statistics.
Fifteen-foot heads at head-to-head spacing fall on a grid of 4 columns by 3 rows. That places 4 quarter circles at the corners, 6 half circles along the edges and 2 full circles inside. At 30 psi the lawn flows 4 × 0.93 + 6 × 1.85 + 2 × 3.70, or 22.22 gpm. Divided by 10 gpm and rounded up, it needs 3 zones. The middle row alone flows 11.10 gpm, too much for one valve, so the zones split as the front row plus one middle half circle (7.41 gpm), the two full circles plus the other half (9.25 gpm) and the back row (5.56 gpm).
| Line | Quantity | Basis | Cost |
|---|---|---|---|
| Spray heads, 4 in. pop-up with 15 ft fixed nozzle | 12 | $5.49 each, Rain Bird store | $65.88 |
| Zone valves, 1 in. with flow control (100DVF) | 3 | $29.99 each, Rain Bird store | $89.97 |
| Smart controller, 8 stations (ARC8) | 1 | $122.99, Rain Bird store | $122.99 |
| Lateral pipe | 135 ft | three 45 ft rows | Supplier quote |
| Mainline to the valve manifold | 40 ft | point of connection to valves | Supplier quote |
| Backflow assembly | 1 | type and size by local code | Supplier quote |
| Valve wire, fittings, swing joints, valve boxes | per head and per valve | counted from the plan | Supplier quote |
| Crew labor | 2 people × 8 h | $18.82 an hour | $301.12 |
| Priced lines | $579.96 |
The head and valve prices are Rain Bird's retail listings for the 4-inch 1800 Series pop-up and the 1-inch DVF valve, checked November 12, 2026; a supply house account prices them differently. The wage is the May 2025 median for landscaping and groundskeeping workers, a group in which some workers "help install lighting or sprinkler systems" (BLS Occupational Outlook Handbook, grounds maintenance workers, modified September 14, 2026). It carries no payroll tax, insurance or truck cost.
A public bid shows the distance between that wage and a billed hour. In the irrigation services bid opened by My Health My Resources of Tarrant County on May 8, 2025, the single response priced an irrigation leader at $65 an hour (MHMR Tarrant, ITB 25-023 bid tabulation, opened May 8, 2025). The $46.18 between $65 and $18.82 is what such a rate leaves for burden, the truck, overhead and margin.
Repair estimates priced by the repair
Service work is priced by the repair rather than by the head count. The same bid lists $65 for a residential rotor, $160 for a lateral leak and $250 for a main line, against $85, $195 and $380 for commercial property, and a 5 percent markup (MHMR Tarrant, ITB 25-023 bid tabulation, opened May 8, 2025).
In FieldRanger a repair found on a service call is priced as an estimate from the customer's HubSpot record, with the photo of the broken rotor or the wet spot attached to the work order. Heads, fittings and pipe used on the repair are logged against the job. The repair calendar, from start-ups to blowouts, belongs to irrigation scheduling software.
From site visit to signed installation estimate
- The homeowner's request lands in HubSpot as a contact with a deal for the property.
- The site visit records static pressure, meter size and service line on the checklist, with photos of the meter, the yard and the point of connection.
- The estimator lays out heads and zones in design software or on a sketch, and the plan joins the job's files in Google Drive.
- The estimate is written from the HubSpot deal or contact record, or in FieldRanger with a link to the deal: heads, valves, pipe by size, wire, controller, backflow assembly and labor.
- PandaDoc collects the signature, the deal is won, and FieldRanger opens the installation job with the deal's context carried over.
- Heads, valves, pipe and the controller leave a specific warehouse on checkout and are logged against the job.
- Clock-ins record where the installer was, and the invoice comes off the completed work order, with payment by Stripe and the record passed to QuickBooks.
Estimated parts against installed parts
The finished job tests the estimate. Materials tracking logs the heads, valves and feet of pipe actually installed, located clock-ins hold the crew hours, and revenue reports show revenue and margin by customer or service type. When installed pipe runs past the estimated footage on lots with long side yards, the next estimate for that kind of lot carries more pipe. An estimate that never meets its installed quantities cannot be corrected this way.
Irrigation estimating gaps in FieldRanger
- No hydraulic calculation, head layout or zone sizing; those come from design software or the estimator.
- No parts catalog with supplier prices; prices come from the company's own supplier quotes.
- No takeoff from drawings or aerial images.
- No permit or backflow filing with a city or water purveyor.
- Plans are priced per technician on pricing; the trial runs 14 days with no card.
Frequently asked questions
What is irrigation estimating software?
Software that prices a sprinkler or drip installation from its parts and labor: heads, zones, valves, pipe, wire, the controller and the backflow assembly. FieldRanger keeps the priced lines on the HubSpot deal or in FieldRanger, and a won deal opens the installation job.
How many zones does a sprinkler system need?
Divide the combined flow of all heads by the available flow and round up. On Rain Bird's example supply of 10 gpm, a 30 by 45 foot lawn of 15-foot spray heads flowing 22.22 gpm needs 3 zones.
How far apart should sprinkler heads be spaced?
Rain Bird describes head-to-head spacing, 50 percent of the throw diameter, as the common practice, with spacing as close as 40 percent in wind. A 15-foot nozzle is placed 15 feet from its neighbors.
What lines belong on an irrigation installation estimate?
Heads and nozzles, zone valves, mainline and lateral pipe by size, wire, fittings and valve boxes, the controller, the backflow assembly and any required test, permits and crew labor.
How are sprinkler repairs priced?
By the repair. One public bid in Tarrant County, Texas, priced a residential rotor at $65, a lateral leak at $160 and a main line at $250, with a 5 percent markup.
Can irrigation estimates be built in HubSpot?
Yes. The estimator opens the HubSpot deal or contact record and builds the estimate there with FieldRanger, or builds it in FieldRanger, where it remains linked to the deal.
Does irrigation estimating software calculate hydraulics?
Design software does. FieldRanger holds the quantities and prices the estimator enters and does not size pipe or calculate pressure loss.
A 30 by 45 foot lawn on a 10 gpm supply is three zones before it carries any price, and in FieldRanger the zone count, the parts and the installed hours sit on one HubSpot deal. Rounds after the install go through irrigation scheduling software, licensing and backflow testing sit on irrigation service software, and pricing lists the per-technician plans; Start free trial runs 14 days with no card.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo