Industry

Irrigation Design Software and FieldRanger for Irrigation on HubSpot

Irrigation design software draws the system; FieldRanger runs the irrigation business on HubSpot: installs, start-ups, backflow tests and invoices.

Updated 9 min read

Irrigation design software lays out a sprinkler or drip system: zones, heads, pipe sizes and the hydraulic calculations behind them. FieldRanger is the irrigation service software for everything after the design, inside HubSpot: the estimate, the installation crew, the spring start-up, the backflow test, repairs, the fall winterization and the invoice.

Irrigation is one of the trades under field service software by industry, and an irrigation contractor sells two kinds of work. An installation is a project: a design, a priced estimate, a crew for several days and a final walk-through. A service account is a calendar: a start-up each spring, repair calls through the summer, a backflow test and a winterization each fall. Irrigation business software has to carry both kinds of work, and irrigation design software carries neither.

Irrigation design software, controller software and service software

Three kinds of product are sold as irrigation software programs, and each does a different job.

Irrigation design software draws and sizes the system. Netafim describes IRRICAD as "a stand-alone, graphically based, computer aided design package" that "combines the advantages of CAD drawing with powerful hydraulic pipe sizing and network analysis techniques" (Netafim, IRRICAD, checked November 2026). Toro publishes AquaFlow as "Toro's FREE drip irrigation design software" (Toro, AquaFlow, checked November 2026). Residential irrigation design software belongs to the same category, scaled to one lot: heads, zones, laterals and a controller.

Irrigation management software, in the water sense, runs the controller. EPA's WaterSense program labels controllers that decide watering from weather data or from soil moisture data (EPA WaterSense, labeled controllers, updated March 5, 2026).

Irrigation service software, also sold as irrigation business management software, runs the contractor: leads, estimates, crews, parts, service visits and invoices. FieldRanger is this third kind. It does not draw zones, size pipe or program a controller; it schedules and records the crews who install and service what the design specifies.

Irrigation mapping software sits between the first kind and the third. The map a service technician needs is the as-built drawing, which shows where the valves, the backflow assembly and the controller actually are. In FieldRanger the as-built PDF is kept with the job's files in Google Drive, and photos of each valve box attach to the work order and sync to the customer's HubSpot record.

Texas irrigation licenses, plans and completion records

Texas shows how far licensing reaches into an irrigation schedule. TCEQ licenses irrigators, technicians and inspectors. A Landscape Irrigator "can sell, design, consult, install, maintain, alter, repair, or service an irrigation system". An Irrigation Technician can connect a system to a water supply, including the backflow device, but "must be under the direct supervision of a licensed landscape irrigator" while doing so. Each license is valid for three years (TCEQ, occupational licenses, last modified July 2, 2026).

The rules also fix the paperwork. Under 30 TAC 344.61, "An irrigator shall prepare a site-specific irrigation plan for each new irrigation system", and the plan "must be on the job site during the installation" (30 TAC 344.61, amended effective July 26, 2020). At completion, 30 TAC 344.63 requires a final walk-through with the owner, a maintenance checklist signed at that walk-through, a waterproof sticker with the irrigator's name and license number on each automatic controller, and "The irrigation plan/as-built drawing indicating the actual installation of the system" (30 TAC 344.63, amended effective July 26, 2020).

Each requirement has a place in FieldRanger. Skill-based assignment matches the installation to a licensed irrigator, and the plan travels with the job in Google Drive. A custom checklist on the completion visit lists the walk-through, the maintenance checklist, the controller sticker and the as-built, and the owner's signature closes the work order.

Backflow testing and tester certification

A backflow prevention assembly keeps irrigation water from flowing back into the drinking water supply, and its test is scheduled work with a legal trigger. In Texas, 30 TAC 344.50 requires assemblies to "be tested by a licensed backflow prevention assembly tester" upon installation, repair, replacement or relocation. Assemblies on irrigation systems designated as health hazards "shall be tested annually" (30 TAC 344.50, amended effective July 26, 2020). Where a water purveyor sets a stricter rule, the stricter rule sets the date.

Elsewhere, testers are certified through programs such as ASSE 5110, which asks for five years of documented field experience, a 40-hour course and written and practical exams. "Certification shall be for a three (3) year period" (ASSE, 5110 backflow prevention assembly tester, checked November 2026).

In FieldRanger an annual test is a recurring job template on the property, and skill-based assignment sends it only to technicians who hold the tester certification. The checklist records the assembly type, serial number, readings and result, and a photo of the assembly attaches to the work order. The test report goes to the water purveyor on the purveyor's own form.

Seasonal start-up and winterization contracts

Freezing climates give irrigation service two fixed rounds a year. Utah State University Extension explains the fall one: "Irrigation valves, pipes, and other components may be damaged as water remaining inside expands due to freezing", so the lines are blown out with compressed air. Because the work needs a large compressor, the Extension notes that "it may be necessary to hire a local landscape company that offers this service" (USU Extension, putting the yard and garden to bed, March 2018). Spring reverses the work: the system is filled, each zone is run, broken heads and leaks are found, and the controller is reprogrammed for the season.

A service contract holds both visits as a recurring job template for each property. Bulk scheduling assigns a whole round once a freeze is forecast, and FieldRanger builds each technician's route through it automatically, sequenced to cut drive time rather than in the order the contracts were signed. Each visit's checklist carries the zone count, the backflow device type and the location of the shut-off. Repairs found at start-up become follow-on jobs, priced on the HubSpot deal or in FieldRanger.

Repair calls, parts and the customer record in HubSpot

Up to 50%

of residential outdoor water that experts estimate is wasted through overwateringSource: EPA WaterSense, updated March 5, 2026

Between the two rounds, irrigation service is repair work: a broken head beside a driveway, a lateral leak, a valve that will not close, a controller that lost its program. EPA WaterSense reports that experts estimate "as much as 50 percent" of the water used outdoors at homes "is wasted due to overwatering" (EPA WaterSense, updated March 5, 2026). A repair visit that finds a stuck valve or an outdated controller can end with a replacement quoted on the deal.

Irrigation service tasks and the FieldRanger feature behind each
Irrigation taskFieldRanger feature
Same-day call for a broken mainlineDrag-and-drop calendar; routes adjust when a job is added
Find the valve box and the controllerCustomer notes and photos on the work order
Heads, valves, pipe and fittings on the truckWarehouse-specific inventory checkout; low-stock alerts
Parts used on each repairMaterials tracking for job costing
Licensed connection or backflow testSkill-based assignment by certification
Proof of the repairBefore and after photos synced to HubSpot; customer signature
Bill the repairInvoice from the completed work order; Stripe; QuickBooks sync

A mainline break on a commercial property in July outranks the day's planned visits. Reordering the day around it is the work of dispatch software, and irrigation scheduling software covers rounds and repair calls on one board.

Every visit lands on the same customer in HubSpot. Job completions, notes and photos are logged to the HubSpot timeline, and a job status change can trigger a HubSpot workflow, such as a renewal email after the winterization. The HubSpot field service page lists the records a completed job updates.

An irrigation installation from estimate to paid invoice

  1. A web form creates the contact in HubSpot, and a deal opens for the property.
  2. The site visit measures static pressure and flow at the meter; photos of the yard and the meter attach to the visit's work order.
  3. The system is drawn in design software, and the plan is saved with the job's files in Google Drive.
  4. The estimate is built from the HubSpot deal or in FieldRanger tied to it, and PandaDoc sends it for signature; irrigation estimating software covers heads, zones, pipe and labor.
  5. The deal is marked won, and FieldRanger creates the job with the deal's context carried over.
  6. Pipe, heads, valves, wire, the controller and the backflow assembly are checked out of a specific warehouse and logged against the job.
  7. The licensed irrigator installs the system, with each clock-in recording where the technician was, and a licensed tester records the backflow readings on the checklist.
  8. At the walk-through the owner signs, the as-built joins the job's files, and the invoice is generated from the completed work order. Payment can be taken through Stripe, and invoices and payments sync with QuickBooks.
  9. A recurring job template starts the service contract: the spring start-up, the fall winterization and, where one applies, the annual backflow test.

Irrigation work outside FieldRanger

  • Design, CAD drawing and hydraulic calculation stay in the design tool, along with zone layouts, pipe sizes and precipitation rates.
  • Controller run times are set at the controller or in its own app.
  • Backflow test reports are filed with the water purveyor on its own form, outside FieldRanger.
  • There is no free plan. The trial lasts 14 days with no card, and plans are priced per technician on pricing.

Irrigation scheduling, estimating and billing pages

The irrigation feature pages are irrigation scheduling software for rounds and repair dispatch, irrigation estimating software for pricing an installation, and irrigation billing software for invoices and service contracts. Irrigation also appears under landscaping software, where it shares a calendar with maintenance crews.

Frequently asked questions

What is irrigation design software?

Software that draws an irrigation system and sizes it: heads, zones, pipe and the hydraulic calculations behind them. IRRICAD and Toro's free AquaFlow are examples. FieldRanger is not design software; it runs the jobs that install and service the design.

What is irrigation service software?

Software that runs an irrigation contractor's work after the design: estimates, crews, start-ups, repairs, backflow tests, winterizations and invoices. FieldRanger does this inside HubSpot, so each property's service history sits on the customer record.

What does irrigation management software mean?

Two different things. In water management it is controller software that sets run times from weather or soil moisture data. In business management it is software that schedules and bills the contractor's work, which is the kind FieldRanger is.

Is there irrigation mapping software for as-built drawings?

The design tool produces the as-built drawing. FieldRanger keeps it with the job's files in Google Drive and attaches photos of valve boxes and the backflow assembly to the work order, where the next technician finds them.

Does an irrigation business need a license in Texas?

Yes. TCEQ licenses landscape irrigators, irrigation technicians and irrigation inspectors, and a technician who connects a system to a water supply works under the direct supervision of a licensed irrigator.

When does an irrigation backflow preventer need testing?

In Texas, at installation, repair, replacement or relocation, and every year for assemblies on systems designated as health hazards. The local water purveyor's rules apply as well. FieldRanger holds the annual test as a recurring job on the property.

Is there free irrigation software?

Toro's AquaFlow drip design software is free. FieldRanger has no free plan; its 14-day trial needs no card.

An irrigation system in FieldRanger carries its licensed installer, its as-built drawing, its backflow readings and its next winterization date on one HubSpot customer, and the technician who opens the valve box next spring sees all four. Booking those rounds is covered under irrigation scheduling software and other trades under field service software by industry; per-technician plans are on pricing, and the Start free trial button opens 14 days with no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo