Industry

Fleet Repair Management Software:Customer Fleets and Service Vans for Mobile Mechanics in FieldRanger and HubSpot

Fleet repair management software for mobile mechanics on HubSpot: FieldRanger books PM visits to customer fleets and tracks the mechanic's own service van.

Updated 9 min read

Fleet repair management software for a mobile mechanic covers two sets of vehicles: the customer's trucks serviced on site, and the van the mechanic drives to them. FieldRanger runs both from HubSpot. Preventive maintenance visits are recurring jobs on each fleet account, and the service van sits on a live map with its own maintenance schedule.

The page narrows mobile mechanic software, which covers the whole trade, to the fleet side of it. A delivery company, a landscaper or a utility contractor hires a mobile mechanic to service its vans and trucks in its own yard, after hours, so the vehicles are back on the road by morning. That customer measures the mechanic on two things: whether each vehicle's service happened when it was due, and whether the record of it would satisfy an auditor.

Customer fleets and the service van as two records

The two sets of vehicles live in different parts of FieldRanger, because they answer different questions.

Customer fleet vehicles and the mechanic's own van in FieldRanger
QuestionCustomer fleet vehicleMechanic's service van
Who owns itThe fleet customer, a HubSpot companyThe mobile mechanic business
What identifies itUnit number, VIN, plate and odometer on the work orderA vehicle record in FieldRanger's fleet management
When it is next dueThe carrier's PM interval, booked as a recurring jobMaintenance scheduling reminders for oil changes, inspections and repairs
Where it is nowIn the customer's yard; FieldRanger does not track itOn the live map, from vehicle tracking
Its historyThe work orders on the customer's HubSpot recordMaintenance history for the van
What it costsRevenue and margin by customer in revenue reportsFuel use, mileage and utilization reports

FieldRanger's fleet functions cover the company's own vehicles: GPS location, reminders, fuel and mileage. A customer's truck is identified on each work order and builds its history on the customer's account.

FMCSA maintenance records under 49 CFR 396

A fleet that runs commercial motor vehicles carries a federal duty, and the mobile mechanic's work order is part of how the carrier meets it. Under 49 CFR 396.3, every motor carrier must systematically inspect, repair and maintain all motor vehicles subject to its control. For each vehicle controlled for 30 consecutive days, the carrier keeps four kinds of record:

  1. an identification of the vehicle, including company number if marked, make, serial number and year;
  2. "A means to indicate the nature and due date of the various inspection and maintenance operations to be performed";
  3. a record of inspection, repairs and maintenance indicating their date and nature;
  4. for buses, a record of tests on pushout windows, emergency doors and emergency door marking lights.

The records are retained where the vehicle is housed or maintained, for 1 year and for 6 months after the vehicle leaves the carrier's control (49 CFR 396.3, via the Cornell LII mirror, which shows amendments through July 21, 2026).

The periodic inspection is separate. Under 49 CFR 396.17, every component listed in Appendix A must have passed an inspection within the 12 months before the carrier uses the vehicle. The carrier may inspect its own vehicles. It may instead use as its agent a commercial garage, fleet leasing company, truck stop or similar business, with facilities suited to commercial vehicle inspections and inspectors qualified under 396.19 (49 CFR 396.17, via Cornell LII, as amended October 14, 2021). The inspector qualifications themselves are set out in the how to start a mobile mechanic business guide.

The inspection report identifies the inspector, the motor carrier, the date, the vehicle, and the components inspected with their results, including any below the Appendix A standards. The original or a copy is kept for fourteen months by the carrier "or other entity that is responsible for the inspection" (49 CFR 396.21, via Cornell LII, as amended October 14, 2021).

In FieldRanger the work order carries those fields. A custom checklist for the annual inspection lists the Appendix A components, each with a pass or fail line. The mechanic's name is on the job, and the unit number, VIN and date are in the job details. The fleet manager signs on completion, and the work order with its photos is the document the carrier files.

PM intervals by mileage, engine hours and date

Section 396.3 asks for a due date for each inspection and maintenance operation, but sets no interval in miles; the only fixed interval in the section is 90 days for bus pushout windows and emergency doors. The carrier sets the interval, in miles, engine hours or calendar time. Apart from those bus items, the interval the rules fix is the 12-month periodic inspection under 396.17.

Recurring job templates exist for maintenance contracts and repeat service calls. A fleet agreement becomes a template per service type on the customer's account, and bulk scheduling lays a quarter's visits onto the calendar at once. The mechanic records the odometer reading on each visit's checklist and the mileage at which the next service falls due in the job notes. When the fleet manager's mileage report shows a unit running ahead of the calendar, the dispatcher drags its job earlier.

Fleet yard visits: one job per unit

A yard visit services several vehicles, and each gets its own job. Bulk scheduling places one job per unit at the same address on the same evening, so each truck has its own work order, checklist, photos and invoice. The fleet manager sees which units were serviced, and the carrier's file for each vehicle stays separate.

Parts follow the job. Filters, belts, brake pads and fluids are checked out of a named warehouse before the visit, and materials tracking logs what each unit consumed, for the job's cost. Low-stock warnings and reorder reminders cover the filters that a large account empties out. Each mechanic's van can be its own stock location, so the filters on board are counted where they ride. Billing for those jobs is the subject of mobile mechanic invoice software.

The mechanic's van: tracking, maintenance and mileage

The service van is the mobile mechanic's shop, and FieldRanger's fleet records belong to it.

  • Vehicle tracking shows each van on a live map, so the dispatcher can see which mechanic is closest to a fleet yard calling about a no-start.
  • Fleet alerts report speeding, geofence exits and idle time.
  • Maintenance scheduling sends reminders for the van's own oil changes, inspections and repairs, and maintenance history keeps its service records.
  • Fuel monitoring tracks fuel use and flags waste.
  • Mileage tracking records the van's odometer for expense reports and the IRS mileage log. The IRS business standard mileage rate for 2026 is 72.5 cents a mile from January 1 to June 30, and 76 cents from July 1 to December 31 (IRS, Standard mileage rates, updated July 28, 2026).
  • Vehicle inspections put a digital pre-trip and post-trip checklist on the phone: jack and stands secured, compressor and air lines stowed, fluids capped, fire extinguisher present.
  • Vehicle assignment and utilization reports show, in a business with several vans, which van each mechanic drives and which sits idle.

The tools are equipment. A scan tool, a jack, a battery tester or a torque wrench can be held in asset tracking and checked out by QR code to the mechanic who takes it. Equipment maintenance schedules its servicing and calibration.

A quarterly PM night at a delivery fleet's yard

  1. The fleet's service agreement is a won HubSpot deal on the delivery company's record. Recurring job templates put each of its twelve vans on a quarterly service, four vans an evening.
  2. Before the visit, the fleet manager emails the odometer readings. Two vans booked for next month have already reached their mileage interval, so the dispatcher drags their jobs into tonight's batch.
  3. The mechanic checks out filters, oil and wiper blades from the warehouse. FieldRanger builds the evening's route: one stop at the yard after two customer driveways.
  4. At the yard, the mechanic clocks in, which records the location. Each van's job opens on the phone with its unit number, VIN and PM checklist.
  5. On van 7, the brake pads are below the fleet's replacement threshold. The mechanic photographs the pads and notes the reading on the work order. The fleet manager approves the brake job by phone, and the approval goes in the job notes before the work starts.
  6. Each van's invoice is generated from its completed work order, and invoices and payments sync with QuickBooks for the fleet's account.
  7. Completions, notes and photos post to the delivery company's HubSpot timeline, and job status shows on the deal.
  8. At the end of the night, the van's odometer reading is logged for its IRS mileage record.

Fleet repair management software and HubSpot

Fleet repair management software on HubSpot keeps every fleet account's visits, work orders and spend on one company record. The fleet manager, the accounts payable contact and the operations director are HubSpot contacts on it, and the two-way sync keeps them current in FieldRanger. Revenue reports show job revenue and margin by customer or service type, which separates fleet agreements from one-off driveway repairs. Technician performance reports show completion rates and on-time arrivals for each mechanic.

Job status changes can trigger HubSpot workflows. A completed annual inspection can notify the account owner to send the report to the fleet manager, and a failed brake check can create a task to quote the repair. A Starter portal can hold up to 50 such workflows, with restricted triggers and actions, and a Professional portal up to 300, according to HubSpot (HubSpot, Sales Hub pricing, checked November 2026). The mechanic invoice template shows a filled fleet van invoice for the same kind of visit.

Fleet repair work FieldRanger leaves to other systems

  • No vehicle record for customer-owned trucks with their own odometer and service history; each unit is identified on its work orders.
  • No mileage-triggered or engine-hour-triggered jobs; due mileage is kept in job notes.
  • No telematics feed or diagnostic trouble codes from customer vehicles.
  • No VIN decoder.
  • No multi-visit jobs; a repair that needs a second evening is a second job.

The fleet's own system is a separate purchase. A fleet with an in-house shop and technicians needs fleet maintenance software that holds every vehicle's record and reads telematics. The mobile mechanic who services that fleet from a van needs the appointment, the work order and the invoice, and those are FieldRanger's part.

Frequently asked questions

What is fleet repair management software?

Software that schedules a mobile mechanic's service visits to customer fleets and keeps the record of the mechanic's own vans. FieldRanger books fleet PM visits as recurring jobs in HubSpot and tracks the service van on a live map.

What is fleet repair management software?

Software that runs the repair and maintenance work on a fleet's vehicles: schedules, work orders, parts and records. In FieldRanger each customer vehicle's service is a job with a checklist, photos, the fleet manager's signature and an invoice.

Does 49 CFR 396 set a mileage interval for preventive maintenance?

No. Section 396.3 requires a means to show the nature and due date of each inspection and maintenance operation, and leaves the interval to the carrier. The annual periodic inspection under 396.17 is due at least once every 12 months.

How long does a carrier keep vehicle maintenance records?

Under 49 CFR 396.3, for 1 year and for 6 months after the vehicle leaves the carrier's control. Periodic inspection reports under 396.21 are kept for fourteen months.

Can a mobile mechanic track the service van in the same software?

In FieldRanger, yes. The van appears on a live map, with maintenance reminders, fuel monitoring, mileage logging for IRS records and pre-trip and post-trip inspection checklists.

Does fleet repair software work with HubSpot?

FieldRanger uses HubSpot as its customer database. Fleet customers are HubSpot companies, a won service agreement becomes a job with recurring visits behind it, and every visit's completion and photos post to the HubSpot timeline.

Two records prove a fleet visit in FieldRanger. The fleet's proof is a work order per unit with its odometer reading and checklist; the mechanic's is a van that arrived when the job was due. FieldRanger keeps both, the first on the fleet's HubSpot record and the second in its own fleet records. The rest of the trade is described under mobile mechanic software, billing under mobile mechanic invoice software, and plans per mechanic under pricing; Start free trial there runs 14 days, card not required.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo