Industry

Mobile Mechanic Software:FieldRanger for Mobile Auto and Diesel Repair on HubSpot

Mobile mechanic software on HubSpot: FieldRanger books driveway and fleet-yard repairs, routes the service van, records each vehicle and bills from work orders.

Updated 10 min read

Mobile mechanic software books repairs at the customer's driveway, office lot or fleet yard, routes the service van between them, records each vehicle and the work on a phone, and bills from that record. FieldRanger does this inside HubSpot: each repair is a job on the customer's record, and the completed work order becomes the invoice.

Mobile repair is one of the trades listed under field service software by industry, and it departs from shop repair in three places. The bay is the customer's driveway or yard, so the day is a route rather than a queue at a lift. The parts counter is the van, so a missing part costs a second trip rather than a walk to the shelf. The registration still attaches to a business, so in a state with a repair statute, a mechanic with no shop still registers an address. This page follows Michigan's Motor Vehicle Service and Repair Act for that last point.

Driveway auto repair, mobile diesel repair and fleet service

Mobile repair work and the FieldRanger record for each
WorkCustomerWhere the vehicle sitsFieldRanger record
Driveway repair: brakes, batteries, starters, alternators, beltsHousehold driverDriveway or workplace lotA job on the driver's HubSpot contact, with vehicle details in the job notes
Diagnostic and no-start callsHousehold or business driverWherever the vehicle stoppedA diagnostic job with its own work order and invoice
Pre-purchase inspectionBuyer of a used vehicleSeller's address or dealer lotA job with an inspection checklist and photos
Mobile diesel and heavy truck repairOwner-operator or carrierTruck stop, jobsite or terminalA job per truck on the carrier's HubSpot company
Fleet preventive maintenanceDelivery, utility or contractor fleetThe fleet's yard, after hoursRecurring jobs per unit on the fleet account
Heavy equipment field repairContractorJobsiteA job on the contractor's company, with machine details in the notes

Each row is a job, and a job can carry one mechanic or several. A diagnosis on Tuesday and the repair on Wednesday are two jobs, because FieldRanger has no multi-day jobs. The vehicle is identified on every work order by year, make, model, VIN, plate and odometer reading. Its history therefore builds on the customer's HubSpot record. FieldRanger's fleet records hold the company's own vans; a customer's car has no vehicle record of its own.

Michigan repair facility registration for mobile repair businesses

Michigan registers the repair business. Under MCL 257.1306, "a person shall not engage in the business or activity of a motor vehicle repair facility unless the person registers the facility with the administrator pursuant to this act" (MCL 257.1306, checked November 2026). Registration is handled by the Michigan Department of State. The act defines a facility as a place of business that, for compensation, performs or employs individuals who perform maintenance, diagnosis, vehicle body work, repair service or BAIID service on a motor vehicle. The exclusions include a person who repairs only the vehicles of a single commercial or industrial establishment or government agency, and an individual repairing a personal or family vehicle (MCL 257.1302, as amended by 2025 PA 59, effective February 1, 2026).

The act does not mention mobile repair. Its registration form asks for the facility's established place of business in Michigan, defined as "the premises occupied continuously or at regular periods by a facility where that facility maintains records". For applications made on or after February 1, 2026, the form carries written verification from the local government or zoning authority that the site meets municipal and zoning rules. It also asks for the types of repairs and vehicles, the number of mechanics who perform repairs, the gross revenue range and the square footage used for repairs (MCL 257.1314, effective February 1, 2026). A van-based business registers the premises where its records are kept, and a home office raises a zoning question for the local zoning office before the application goes in.

Michigan repair facility registration fee from July 1, 2026
Gross annual revenueRegistration fee
Under $50,000$100
$50,000 to $100,000$200
$100,001 to $200,000$300
$200,001 to $300,000$400
Over $300,000$500

Source: MCL 257.1330, as amended by 2025 PA 59, checked November 2026. A registration takes effect when approved and expires one year later, and from July 1, 2026 an owner with gross revenue over $300,000 may renew for up to four years (MCL 257.1315, checked November 2026).

Two further rules reach the paperwork. The facility's registration number goes on each copy of "any instrument, form, contract, or other document" it uses with the public, invoices, warranties and waivers among them. The cost of a diagnosis "must be included in the written estimate before the diagnosis is undertaken" (MCL 257.1332, as amended by 2025 PA 59). The rules of California, Florida and New York are compared in how to start a mobile mechanic business.

Mechanic certification by repair category

The facility's registration and the mechanic's certificate are separate credentials in Michigan. A facility must have at least one specialty or master mechanic "in its employ certified in each category" of repair it performs, and major repair by a noncertified mechanic is inspected and approved by a certified one (MCL 257.1305, checked November 2026). The categories for automobiles and light trucks include engine repair, brakes and braking systems, electrical systems, and heating and air-conditioning. The heavy-duty truck categories include "Engine repair, diesel", drivetrains, and suspension and steering systems (MCL 257.1310b, effective February 1, 2026). From July 1, 2026, each certification examination costs $18, an original certificate $25 and a renewal $20 (MCL 257.1330).

FieldRanger's skill-based assignment matches jobs to technicians by certification and expertise, and the Michigan categories can serve as the skill list. A diesel no-start on a box truck goes to a mechanic certified in heavy-duty diesel engine repair; an air conditioning job goes to one certified in heating and air-conditioning. FieldRanger does not track certificate expiry dates, so the office updates a mechanic's skills when a certificate lapses or a new category is passed. Where a noncertified mechanic performs major repair, a checklist line on the job names the certified mechanic who inspected and approved it.

A no-start in Grand Rapids from phone call to paid invoice

  1. A commuter's car will not start in a workplace lot. The request comes in through a HubSpot form on the website, creating the contact and a deal. The office enters the year, make, model and VIN in the job notes and quotes the diagnostic charge.
  2. The diagnostic job goes onto the drag-and-drop calendar with the mechanic already working nearby. The route adjusts to the added job, and the commuter receives a text through Twilio when the van is on its way.
  3. At the car, the mechanic clocks in, which records the location. The checklist records the odometer, the battery voltage and the starter test, and the photos attach to the work order.
  4. The starter has failed. The repair estimate is built in FieldRanger, tied to the HubSpot deal, and sent through PandaDoc; the commuter signs it on the phone.
  5. The diagnostic job is invoiced from its own work order. The repair is a second job the next morning, after the mechanic checks the starter out of the warehouse against it.
  6. The repair is completed and the commuter signs on the phone. The invoice is generated from the completed work order, payment is taken through Stripe, and the invoice and payment sync with QuickBooks.
  7. The completion and its photos post to the commuter's HubSpot timeline, beside the diagnosis from the day before.

Service van, parts and tools

The van carries the shop, and FieldRanger's fleet records belong to it: a live GPS position, reminders for its own oil changes and inspections, fuel use, and odometer logging for mileage records. The van's records, and the preventive maintenance visits a mobile mechanic runs for customer fleets, are covered on mobile mechanic fleet management software.

Parts are counted by location. Technicians check parts and materials out of a specific warehouse or out of their own van, which is a stock location of its own, materials tracking logs what each job used for job costing, and low-stock warnings flag the filters and batteries before the shelf is empty. Tools are equipment: a scan tool, a battery tester, a floor jack or a torque wrench can carry a QR code, be checked out to the mechanic who takes it and have its calibration or service scheduled.

Estimates and invoices at the vehicle

The estimate is built on the HubSpot deal or in FieldRanger, and the invoice comes from the completed work order, as the Grand Rapids sequence shows. The lines a repair bill carries under a state invoice statute are set out on mobile mechanic invoice software, which follows Washington's Automotive Repair Act. The mechanic invoice template and the mechanic work order template show the fields on paper.

Dispatch for booked repairs and roadside calls

A mobile repair board mixes booked work with calls that cannot wait. Multi-technician views show every mechanic side by side with availability and current assignments. Arrival windows are set on each job and on-time performance is tracked against them. When a fleet calls about a truck down at a terminal, the dispatcher drags the job onto the nearest mechanic's day, the route adjusts around it and a push notification puts it on the mechanic's phone. Territory management keeps each mechanic in a zone, and capacity planning shows a day that is already full. The general case of a same-day board is described under dispatch software.

Drivers can book a repair online, and requests by phone, text or a HubSpot form land on the same board. Calls through HubSpot calling or Aircall are logged on the customer's HubSpot record.

Mobile repair customers on the HubSpot record

HubSpot holds the customers; FieldRanger adds the repairs. Contacts and companies sync both ways, so a household driver is a contact and a fleet is a company with its fleet manager and accounts payable contact on it. A won deal becomes a job with its context carried over, job status shows on the deal, and completions, notes and photos are logged to the timeline. Revenue attribution follows revenue from the first form fill to the completed job, which separates repairs won from search, from fleet referrals and from the cards left on windshields. The rest of what FieldRanger writes to HubSpot is described under HubSpot field service.

Shopmonkey and shop management systems compared with FieldRanger

Shopmonkey's mobile mechanic page describes "letting customers book online" and lists integrations "with QuickBooks, PartsTech, CARFAX and more". It states "Manage heavy duty truck and fleet accounts with ease". The page does not mention HubSpot (Shopmonkey, mobile mechanic software, checked November 2026).

A mobile mechanic who orders parts through a catalog integration on each job is better served by a shop management system of that kind. FieldRanger fits the mobile repair business that sells through HubSpot, runs a fleet book beside its driveway work, and wants the route, the work order and the invoice on the same customer record.

Mobile mechanic work outside FieldRanger

  • No labor time guide, parts catalog or parts ordering integration.
  • No VIN decoder; vehicle details are typed into the job.
  • No vehicle record for a customer's car or truck; its history sits on the customer's HubSpot record.
  • No multi-day jobs: a diagnosis and a next-day repair are two jobs.
  • No tracking of mechanic certificate expiry or facility registration renewal dates.

Mobile mechanic guides, templates and comparisons

Starting out: how to start a mobile mechanic business, the mobile mechanic business plan with its sections and a sample calculation, mobile mechanic business insurance and mobile mechanic business cards. Choosing software: best mobile mechanic software, compared on prices and selection criteria. Within the trade: mobile mechanic invoice software for billing and mobile mechanic fleet management software for fleet accounts and the van.

Frequently asked questions

What is mobile mechanic software?

Software that books repairs at the customer's location, routes the mechanic's van, records the vehicle and the work on a phone, and bills from the work order. FieldRanger does this inside HubSpot, with each repair as a job on the customer's record.

Is there free mobile mechanic software?

FieldRanger is a paid product, priced per technician, with a 14-day trial that needs no card. Spreadsheets and paper work orders cost nothing, and the trials of paid products are free for their length.

Does a mobile mechanic need to register in Michigan?

Michigan's Motor Vehicle Service and Repair Act requires a person in the business of a motor vehicle repair facility to register it. The act does not mention mobile repair; the form asks for an established place of business where records are kept, with local zoning verification from February 1, 2026.

How much does Michigan repair facility registration cost?

From July 1, 2026, the fee runs from $100 for gross annual revenue under $50,000 to $500 for revenue over $300,000, under MCL 257.1330. A registration lasts one year from approval.

Do mobile mechanics in Michigan need to be certified?

A facility must have at least one mechanic certified in each category of repair it performs, and major repair by a noncertified mechanic is inspected and approved by a certified one. Heavy-duty categories include diesel engine repair.

Can mobile mechanic software handle diesel and fleet work?

FieldRanger schedules a job per truck on the carrier's HubSpot company, assigns it to a mechanic with the matching certification and holds recurring maintenance visits for fleet accounts. Customer vehicles are identified on each work order.

Does FieldRanger have online booking for mobile mechanics?

Yes. Drivers can book a repair online, and the office places each booking on the calendar beside requests that arrive by phone, text or a HubSpot form.

Does mobile mechanic software work with HubSpot?

FieldRanger runs inside HubSpot. A won deal becomes the repair job, job status shows on the deal, and completions and photos post to the customer's timeline.

A Michigan van-based repair business carries two credentials, the facility's registration and each mechanic's certified categories, and FieldRanger puts the second to use in every job it assigns. Billing continues on mobile mechanic invoice software, other trades sit under field service software by industry, and per-technician plans are on pricing, where Start free trial gives 14 days with no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo