Industry

Moving Company Estimate Software:Surveys, Cube Sheets and Tariff Rates in FieldRanger and HubSpot

Moving company estimate software on HubSpot: FieldRanger keeps the survey photos, cube sheet totals, crew hours, cartons and estimate terms on the move's deal.

Updated 10 min read

Moving company estimate software turns a survey of the household into a priced offer: a cube sheet of the items, the weight or crew hours they imply, and terms that state whether the figure binds. FieldRanger builds that estimate from the HubSpot deal or contact record, or in FieldRanger tied to the deal.

The federal rules on binding and non-binding interstate estimates are summarized on moving company software. This page covers the work beneath those rules: the survey, the cube sheet, the conversion from cubic feet to pounds, the not-to-exceed proposal written into Texas rules, the hourly bands in Washington's intrastate tariff, and a priced local move.

Physical and virtual surveys under 49 CFR 375.401

An interstate estimate starts with a survey. The mover conducts a physical survey of the household goods and writes the estimate from it; the shipper may waive the survey in writing, signed before loading, and the waiver is kept with the bill of lading. The estimate can be amended before loading and not after (49 CFR 375.401, via Cornell LII, amended April 26, 2022).

"Physical" does not mean in person. The definitions section reads: "Physical survey means a survey which is conducted on-site or virtually." A virtual survey has to let the mover clearly identify the goods "through live or pre-recorded video" (49 CFR 375.103, via Cornell LII, amended November 17, 2023). Washington applies the same idea within the state: a carrier may conduct its visual inspection by video conferencing, or have the customer complete a web or paper calculation sheet (Washington UTC, Tariff 15-C, Item 85, effective January 1, 2026).

In FieldRanger an on-site survey runs as a work order on the estimator's phone, with photos of the large pieces and the stairwell attached and a checklist for floors, carry distance and parking. A customer's own survey video is kept with the job's files in Google Drive.

Cube sheets and the seven-pound conversion

A cube sheet lists each article with its cubic feet per piece, the number of pieces and the total. Washington's Utilities and Transportation Commission publishes a completed example.

Completed cube sheet published by the Washington UTC (checked November 12, 2026)
ArticleCubic feet per piecePiecesCubic feet
Desk, small22122
Sofa, 4 cushions60160
Television combination25250
Bed, king size70170
Night table5210
Dishwasher20120
Barbecue10110
Sewing machine, portable, coded C (not to be shipped)515
Total10247

The commission multiplies 247 cubic feet by 7 pounds per cubic foot for an estimated weight of 1,729 pounds (Washington UTC, completed cube sheet, checked November 12, 2026). Its total includes the sewing machine coded C, an article not to be shipped. Without it the shipment is 242 cubic feet and 1,694 pounds, so the codes change the estimate as well as the inventory.

Seven pounds recurs across the rules. Washington requires every estimate to carry a cube sheet inventory with the estimated cubic footage of each item. A long-distance estimate also states the total weight and the formula behind it, which "may not be based on less than seven pounds per cubic foot" (Tariff 15-C, Item 85, effective January 1, 2026). Texas permits a constructive weight of seven pounds per cubic foot of properly loaded space only where no certified scale is available at origin, en route or destination (43 Tex. Admin. Code § 218.60, amended effective February 1, 2017). On an interstate move, a volume-based estimate that will later convert to a weight-based rate comes with a written explanation of the conversion formula (49 CFR 375.405, via Cornell LII, amended November 17, 2023).

FieldRanger does not build the cube sheet or hold a table of cubic feet per article. The estimator's sheet, on paper or from a moving-specific tool, goes into the job's files in Google Drive. The estimate then carries the totals: cubic feet, the converted weight and the formula used.

Binding, non-binding and not-to-exceed terms by jurisdiction

Estimate terms under federal, Washington and Texas rules (checked November 12, 2026)
Rule setEstimate typesDue at deliveryCeiling on the final bill
Interstate, 49 CFR Part 375Binding; non-bindingBinding: the estimate. Non-binding: up to 110 percent of itBinding: the estimate, outside the listed exceptions. Non-binding: tariff charges, the rest billed after delivery
Washington intrastate, Tariff 15-CBinding; nonbindingBinding: the estimate and supplements. Nonbinding: 110 percentBinding: no other amount. Nonbinding: 125 percent of the estimate plus accepted supplements
Texas intrastate, 43 Tex. Admin. Code ch. 218Binding proposal; not-to-exceed proposalStated on the proposal, with the forms of payment acceptedBinding: the exact price. Not-to-exceed: the stated maximum, changed only by a signed amendment

Part 375 names two kinds of estimate. Its Appendix A uses "not to exceed" for two figures only: the 15 percent cap on impracticable operations charges and the 110 percent paid at delivery (Appendix A to Part 375, via Cornell LII, amended April 26, 2022). A binding not-to-exceed estimate on an interstate move is therefore a term the mover offers under its own tariff, not a third type in the regulation.

Texas writes the idea into the rule. A binding proposal states "the exact price"; a not-to-exceed proposal states "the maximum price a shipper can be required to pay" and may add a non-binding approximate price. An hourly offer states the maximum number of hours unless the shipper acknowledges that the number is not necessary (43 Tex. Admin. Code § 218.2, amended effective January 2, 2025). Each written proposal says conspicuously which kind it is and carries the sentence "This proposal is for listed items and services only. Additional items and services may result in additional costs." When more goods turn up, the carrier needs the shipper's written agreement before moving them. An amendment signed and dated by both states the new maximum; without one, only the original charges may be assessed (43 Tex. Admin. Code § 218.56, amended effective January 2, 2025).

In FieldRanger a supplemental estimate, or a Texas amendment, is a revised estimate on the same HubSpot deal. PandaDoc carries it to the customer for signature before the extra goods are loaded, and the signed copy joins the job's files.

Hourly local moves and weight-based long moves

Washington divides intrastate moves at 55 miles. A local move of 55 miles or less is rated by the hour, with vehicle, equipment and labor inside the rate (Item 205). A move of more than 55 miles is rated by mileage and weight, with a minimum charge calculated on seven pounds per cubic foot of loaded vehicle space; both the minimum charge weight and the actual weight go on the bill of lading (Item 105). A local estimate states the number of personnel and vehicles, the hours each will work and the rates that apply (Item 85). The commission sets the band each hourly rate must fall inside.

Hourly bands for Washington local moves, Tariff 15-C Item 230 (effective January 1, 2026)
ChargeMove of 3 hours or lessMove of more than 3 hours
Truck and driver, per hour$39.20 to $154.38$37.93 to $149.40
Each additional worker, per hour$30.69 to $134.48$29.63 to $129.83

Weight-based pricing ties the bill to the scale rather than to the crew's hours. Under the Texas rule, a carrier pricing a not-to-exceed proposal by weight determines the weight of each shipment on a certified scale before assessing any charges. The shipper may watch every weighing and may ask for a reweigh before unloading, and the charges then follow the reweigh (43 Tex. Admin. Code § 218.60, amended effective February 1, 2017). FieldRanger has no scale connection; the signed weight tickets are photographed onto the work order.

Sample estimate: a three-person local move in Washington

The sample prices a weekday local move under 55 miles: a truck and driver plus two additional workers for 5 hours, counted from the terminal and back. The hourly rates and carton prices are sample carrier rates placed inside the Tariff 15-C bands, and the hours and carton counts are sample inputs. Tape, paper and bubble wrap sit inside the carton price, because Item 225 bars a separate charge for packing materials.

Sample nonbinding local estimate, Washington (rates are sample inputs inside the Item 230 and Item 225 bands)
LineQuantitySample rateTariff 15-C bandAmount
Truck and driver5.0 hours$125.00 an hour$37.93 to $149.40$625.00
Additional workers2 × 5.0 hours$65.00 an hour$29.63 to $129.83$650.00
Cartons, 3 cubic feet25$6.00 each$3.10 to $15.39$150.00
Cartons, 4½ cubic feet15$7.50 each$3.72 to $18.46$112.50
Wardrobe cartons4$20.00 each$7.91 to $38.89$80.00
Estimate total$1,617.50

Written as nonbinding, the estimate lets the mover collect $1,779.25 at delivery, 110 percent, and no more than $2,021.88 in total, 125 percent, unless the customer accepts a supplemental estimate (Items 80 and 85). Each extra crew hour at these rates costs $255.00. A move that runs 6.5 hours prices at $2,000.00: the crew collects $1,779.25 at the door, and the customer has at least 30 days to pay the remaining $220.75. At 7.5 hours the tariff charges reach $2,255.00, and the $233.12 above the 125 percent ceiling cannot be collected.

Written as binding, the estimate is $1,617.50 however long the move runs, and the same 6.5-hour move leaves $382.50 of crew time unbilled. The nonbinding form shares an overrun with the customer up to the ceiling; the binding form leaves all of it with the mover.

The crew, the truck and the five hours on this estimate become the booking on moving company scheduling software, where Washington's regular hours and overtime rules decide which days the price holds.

From survey to signed estimate in FieldRanger

  1. A HubSpot form or a call creates the contact and a deal with both addresses and the move date.
  2. The estimator runs the survey work order on site, or files the customer's video for a virtual survey.
  3. The cube sheet total, the converted weight or the crew hours go onto the estimate, built from the deal or in FieldRanger.
  4. PandaDoc sends the estimate for signature. In Washington it goes out with the commission's Consumer Guide to Moving in Washington State, which Item 85 requires at the time of the estimate.
  5. The deal is won, and FieldRanger opens the move job with the deal's context carried over, including the crew size and hours the price assumed.
  6. On move day, each mover's located clock-in and clock-out record the hours against the job.
  7. The completed work order generates the invoice; Stripe takes payment and QuickBooks receives both.

Quoted hours against clocked hours

An hourly estimate is a forecast; the move day records the outcome. Job-level time tracking logs clocked hours against each move, and revenue reports show revenue and margin by service type, such as walk-up apartments or houses with elevators. When walk-ups run past their quoted hours across a season, the next walk-up estimate carries the extra hour.

Moving estimate work outside FieldRanger

  • No cube sheet builder and no table of cubic feet per article.
  • No tariff tables, rate bands or check that a rate sits inside them.
  • No conversion from cubic feet to weight; the estimator applies the formula.
  • No scale connection; weight tickets are photographed onto the work order.
  • No valuation calculator; the customer's protection choice is recorded on the signed estimate.
  • Plans are priced per technician on pricing, and the trial runs 14 days with no card.

Frequently asked questions

What is moving company estimate software?

Software that turns a household survey into a priced estimate: the cube sheet, the weight or crew hours, the cartons, and binding or non-binding terms. FieldRanger builds the estimate from the HubSpot deal or in FieldRanger tied to the deal, and the won deal becomes the move job.

How is a moving estimate calculated from a cube sheet?

Each article's cubic feet are multiplied by its number of pieces and summed, and the total is converted to weight at no less than seven pounds per cubic foot where a weight rate applies. The Washington UTC's sample cube sheet of 247 cubic feet converts to 1,729 pounds.

What is a binding not-to-exceed moving estimate?

An estimate that sets a ceiling on the bill rather than an exact price. Texas writes it into its rules as the not-to-exceed proposal, which states the maximum a shipper can be required to pay. Federal Part 375 names only binding and non-binding estimates, so on interstate moves the term comes from the mover's tariff.

How much over a non-binding moving estimate can a mover charge in Washington?

Tariff 15-C requires the mover to release the shipment on payment of 110 percent of the estimate and caps the total at 125 percent of the estimate plus any supplemental estimates the customer accepted. The customer has at least 30 days to pay the amount above 110 percent.

Can a moving survey be done by video?

For interstate moves, 49 CFR 375.103 defines a physical survey as one conducted on-site or virtually, by live or pre-recorded video that lets the mover clearly identify the goods. Washington's tariff allows the visual inspection by video conference.

How are local moves priced in Washington State?

By the hour, for moves of 55 miles or less, inside bands set by the Utilities and Transportation Commission. For a move of more than 3 hours, Tariff 15-C allows $37.93 to $149.40 an hour for a truck and driver and $29.63 to $129.83 for each additional worker.

Can moving estimates be built in HubSpot?

Yes. FieldRanger builds the estimate from the HubSpot deal or contact record, or in FieldRanger with the estimate kept tied to the deal, and PandaDoc carries it to the customer for signature.

On the sample Washington estimate, the 125 percent ceiling arrives at 6.6 crew hours, so the number of hours written on a nonbinding estimate decides how much of a long day the mover is paid for. FieldRanger holds that number, the survey photos and the clocked hours on one HubSpot deal. Booking the crew is covered on moving company scheduling software, the trade's federal rules on moving company software, and the per-technician plans, with a no-card Start free trial of 14 days, on pricing.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo