Industry

Moving Company Scheduling Software:Crews, Trucks and Move-Day Windows in FieldRanger and HubSpot

Moving company scheduling software on HubSpot: FieldRanger books movers and trucks into move-day windows, logs hours by job and chains long moves day by day.

Updated 10 min read

Moving company scheduling software books each move onto a date and an arrival window, with the crew size the estimate priced and a truck the assigned driver is licensed to drive. FieldRanger does this inside HubSpot: the won deal becomes the move job, the dispatcher places it on the calendar, and each assigned mover's phone shows it.

Scheduling is the point in moving company software where a sold move meets the company's limits: how many movers work that day, which trucks are free, who may drive them, and how many hours the rules allow on the road. Moving company dispatch software works the same board on the day itself, when a mover calls out, a truck fails its pre-trip check or a morning move runs into the afternoon.

Crew size, truck class and driver licensing

The estimate fixes the crew and the truck before the dispatcher sees the job, as moving company estimate software describes for a Washington local move. The dispatcher's task is to find that crew and that truck on the date sold. Customers can book the in-home estimate visit online.

The truck brings its own licensing rule. A single vehicle with a gross vehicle weight rating of 26,001 pounds or more is a commercial motor vehicle for commercial driver's license purposes (49 CFR 383.5, via Cornell LII, checked November 12, 2026). The federal safety rules reach further down: in interstate commerce they apply from 10,001 pounds (49 CFR 390.5T, via Cornell LII, amended July 21, 2026). A 26-foot box truck and a cargo van therefore go to different drivers, and the rule belongs in the assignment rather than in the dispatcher's memory.

FieldRanger carries the rule as a skill. Skill-based assignment matches jobs by certification, so a CDL becomes a qualification on the driver's record and a requirement on the job. Vehicle assignment shows which trucks are free and who has each one, and the equipment availability calendar keeps two crews from claiming the same appliance dolly or pad stack. Capacity planning flags a mover already booked for the day, and the multi-technician view shows every mover side by side.

Move types and the dispatch constraint each sets
Move typeWhat the estimate fixesDispatch constraintFieldRanger record
Local apartment moveCrew size, one truck, quoted hoursA crew free for the whole window, plus slack before the next jobJob with an arrival window; located clock-ins
Local house move with a packing dayPackers on day one, the moving crew on day twoTwo dates in order, the packing day firstTwo jobs on the same deal
Interstate household goodsPickup date, delivery date or period on the bill of ladingA licensed driver with hours available for the whole transitOne job per day of the move; notes logged to HubSpot
Labor-only load or unloadCrew hours, no truckMovers without a vehicle; the customer's truck or containerJob with no vehicle assigned
Piano, safe or other specialty itemThe item and the equipment it needsTrained movers and the equipment on the same dateSkill-based assignment; equipment availability calendar

Moving is crew work, and one job can carry several movers, so a three-person move is one job with three movers assigned and each mover's clock-ins logged against it.

Move-day windows under Washington's regular hours

A state tariff can set the hours a move is priced in, and Washington's does. Hourly rates apply during regular hours only, Monday through Friday from 8:00 a.m. to 5:00 p.m. A move during regular hours carries a one-hour minimum. A move the customer requests before 8:00 a.m. or after 5:00 p.m. on a weekday, or on a weekend or state holiday, carries a four-hour minimum (Washington UTC, Tariff 15-C, Item 230, effective January 1, 2026).

Overtime has its own conditions. It is performed only at the customer's request, at the carrier's option, after a written estimate of the overtime charges and the customer's written consent. It may be billed for loading and unloading outside regular hours, at weekends and holidays, and after eight consecutive hours of service, at $11.38 to $32.84 per person per hour (Item 240). A move that runs past 5:00 p.m. without that consent is crew time the carrier pays for and cannot bill as overtime.

The tariff also fixes how the day is timed. Time goes on the bill of lading to the nearest 15 minutes, and crew breaks are recorded and not charged. The clock runs from the moment the truck leaves the terminal, or the closest place it is parked, to its return or its dispatch to another job. A flat travel time is the alternative (Item 230).

In FieldRanger each move carries an arrival window, and on-time performance is tracked against it. Each mover's clock-in and clock-out record the time and the place, so the office has a second record to set against the times written on the bill of lading. The window for a second move of the day is set with the first move's quoted hours in view, so a morning overrun has room before the afternoon customer's window opens.

Interstate pickup and delivery dates

On an interstate move the dates are a federal obligation. The mover tenders the shipment for delivery on the agreed date or within the period on the bill of lading, unless the shipper waives it (49 CFR 375.603, via Cornell LII, checked November 12, 2026). When pickup or delivery cannot happen on those dates, the mover notifies the shipper "as soon as the delay becomes apparent", by telephone, in person, fax, email, overnight courier or certified mail, and gives the dates it now expects. It keeps a written record of the date, time and manner of the notice and of the amended dates for one year from the notice (49 CFR 375.605, via Cornell LII, amended April 26, 2022).

In FieldRanger the delivery job sits inside the period on the bill of lading. When the truck falls behind, the dispatcher calls the customer through HubSpot calling or Aircall, or texts through Twilio, and writes the time, the method and the new dates into the job's notes. The call is logged on the customer's HubSpot record and the notes on the HubSpot timeline, where the salesperson who sold the move reads the same record. The office also files a copy of each delay notice with the shipment's documents for the one-year term.

Long-distance moves without a multi-day job

FieldRanger has no multi-day job. A long-distance move is scheduled as a chain of single-day jobs on one HubSpot deal: the packing day, the loading day, each transit day and the delivery day. Each job carries its own assigned movers, truck and checklist, and the chain shares the customer, the deal and the files. The driver on the transit days is the constant across the chain; the loading crew at origin and the unloading crew at destination can differ.

Driving hours set how many transit jobs the chain needs. A property-carrying driver starts after 10 consecutive hours off duty, may drive 11 hours inside a 14-hour window, takes a 30-minute break once 8 hours of driving have passed, and stops driving after 60 hours on duty in 7 days or 70 in 8 (49 CFR 395.3, via Cornell LII, amended June 1, 2020). FieldRanger's travel time and mileage estimates give the drive between origin and destination. Dividing that drive into legal days, and logging them, stays with the dispatcher and the driver's electronic logging device: FieldRanger does not count hours of service.

Short-haul hours on local interstate moves

A local move that crosses a state line, from Vancouver, Washington, to Portland, Oregon, is interstate commerce on a short day. The short-haul exception relieves the driver of the record of duty status when the truck stays within a 150 air-mile radius of the normal reporting location, the driver is released within 14 consecutive hours, and at least 10 consecutive hours off duty separate the shifts. The carrier keeps time records for 6 months showing when the driver reported, the total hours on duty and the release time (49 CFR 395.1, via Cornell LII, checked November 12, 2026).

Those three times are what FieldRanger's located clock-ins capture: when each mover started, where, and when the day ended. A monthly export of the time records to CSV or Excel gives the carrier its own six-month file. Whether a given truck and move fall under the exception is the carrier's determination.

Same-day changes on the move board

  1. A mover calls out at 6:30 a.m. The dispatcher opens the multi-technician view, finds a mover with no assignment, and reassigns the absent mover's work by dragging it on the calendar; conflict detection warns of any double-booking the change creates.
  2. A truck fails its pre-trip inspection checklist with a brake defect. Vehicle assignment shows which trucks are free, the job moves to one of them, and the repair goes on the failed truck's maintenance schedule.
  3. The morning move runs long. Job status shows the crew still loading at 11:30, the dispatcher texts the afternoon customer a revised arrival window through Twilio, and push notifications carry the change to the crew.
  4. A customer moves the date by a day. The job is dragged to the new date, and the change reaches each assigned mover's phone as a schedule alert.

A two-move Tuesday for one Washington crew

  1. On Monday the dispatcher reviews Tuesday: an apartment move with an 8:00 a.m. window, quoted at 4.5 hours, and a condominium move with a 1:30 p.m. window, quoted at 3 hours. The hours and windows in this sequence are sample inputs.
  2. At 7:45 a.m. the assigned mover clocks in at the yard, and the truck leaves for the first address; under Item 230 the first customer's time starts here.
  3. The first move finishes at 1:10 p.m., 55 minutes past its quote. The dispatcher sees the status change and texts the second customer a new window starting at 1:45 p.m.
  4. The second move runs from 1:50 p.m. to 5:20 p.m. The 20 minutes after 5:00 p.m. fall outside regular hours, and they are billable as overtime only if the customer requested it and consented in writing (Item 240).
  5. Each completed work order generates its invoice, payment goes through Stripe, and QuickBooks receives the invoices and payments.
  6. The located clock-ins for both moves sit against their jobs, and the overrun on the first move is the figure the estimator sees before quoting the next apartment of that size.

Moving dispatch limits in FieldRanger

  • No multi-day job; each day of a long move is a separate job on the same deal.
  • No hours-of-service count and no electronic logging device.
  • No bill of lading form; the office keeps the signed bill of lading with the shipment's files.
  • Plans are priced per technician, which for a mover means per crew member; see pricing. The 14-day trial asks for no card.

Frequently asked questions

What is moving company scheduling software?

Software that books each move onto a date and an arrival window with the crew size and truck the estimate priced, and keeps crews and trucks from being promised twice. FieldRanger does this on a drag-and-drop calendar inside HubSpot, where the won deal becomes the move job.

What is moving company dispatch software?

Software for the move day itself: replacing a mover who calls out, swapping a truck that fails inspection, and moving later windows when a morning move runs long. In FieldRanger the dispatcher drags jobs between movers and trucks, conflict detection warns of double-bookings and push notifications reach the crew.

Can a Washington moving company charge more for a Saturday move?

Washington's Tariff 15-C sets a four-hour minimum for moves the customer requests at weekends, on holidays or outside 8:00 a.m. to 5:00 p.m. on weekdays. Overtime of $11.38 to $32.84 per person per hour may be billed only at the customer's request, with written consent.

Do movers have to follow hours-of-service rules?

Drivers of commercial motor vehicles in interstate commerce do: 11 hours of driving inside a 14-hour window after 10 hours off, and 60 or 70 hours on duty over 7 or 8 days. Local drivers who stay within 150 air miles and are released within 14 hours can use the short-haul exception, with time records kept for 6 months.

How are multi-day moves scheduled in FieldRanger?

As a chain of single-day jobs on one HubSpot deal, because FieldRanger has no multi-day job: packing, loading, each transit day and delivery each have their own job, assigned movers and checklist.

What must a mover do when an interstate delivery will be late?

Notify the shipper as soon as the delay becomes apparent, by phone, in person, fax, email, overnight courier or certified mail, give the new expected dates, and keep a written record of the notice for one year, under 49 CFR 375.605.

Washington's tariff ends regular hours at 5:00 p.m. on a weekday, and the federal rules stop an interstate driver after 11 hours at the wheel; a move booked past either line is crew time nobody can bill. FieldRanger keeps the window, the assigned mover and the clocked hours on the HubSpot deal that sold the move. Pricing those hours is covered under moving company estimate software, the trade's federal paperwork under moving company software, and plans for each crew member, with the 14-day Start free trial that takes no card, on pricing.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo