Industry

Pest Control Inventory Software:Pest Control Inventory in FieldRanger and HubSpot

Pest control inventory software on HubSpot: FieldRanger checks product out by warehouse, logs each application on the job and flags low stock for the reorder.

Updated 8 min read

Pest control inventory software tracks the pesticides, baits, traps and equipment a pest control company holds, the warehouse each one sits in and the service record that used it. In FieldRanger, product leaves a specific warehouse on checkout, the amount used is logged on the job, and low-stock warnings flag the reorder.

Every treatment sold through pest control software draws on a shelf of regulated product. The truck that carries the product, with its locks, labels and inspections, belongs to pest control fleet software. This page covers the product itself: who may use it, which record follows each application, and where the count is kept.

Restricted use pesticides and the applicator's records

Federal rules reach inventory through the applicator. EPA's certification rule requires each state plan to make certified commercial applicators record restricted use pesticide applications and keep those records for at least two years (40 CFR 171.303(b)(7)(vi), via Cornell LII, checked November 12, 2026).

Restricted use pesticide application record under 40 CFR 171.303(b)(7)(vi), against the FieldRanger record
Record itemWhere it sits in FieldRanger
Name and address of the person for whom it was appliedThe HubSpot contact or company on the job
Location of the applicationThe job's service address
Size of the area treated; crop, commodity or site treatedA line on the job's checklist
Time and date of the applicationThe located clock-in and the completion
Brand or product nameThe material logged against the job
EPA registration numberCarried by the material's name or a label photo
Total amount applied per locationThe quantity on the materials line
Certified applicator's name and certification number; noncertified applicators under supervisionThe technician assigned, matched to the job by certification

The same rule reaches noncertified technicians working under direct supervision. Before such a technician uses a restricted use pesticide, the certified applicator ensures the labeling is accessible "at all times during its use". A commercial applicator also creates or verifies a record of the technician's qualifying training: printed name and signature, the date the requirement was met, the trainer and the training's title. That record stays at the principal place of business for two years (40 CFR 171.201, via Cornell LII, checked November 12, 2026).

Skill-based assignment matches jobs to technicians by certification, so a job that calls for a restricted use product goes to a certified applicator. The control sits at job assignment, and the training records are kept in the company's own files.

New York's storage guidelines and application records

States set the storage and reporting detail. New York's Department of Environmental Conservation asks the owner or manager of a pesticide store to "maintain a current inventory of the pesticides in storage" and to notify the local fire department each year of the types and quantities held. The same guidelines call for storage structurally separated from offices and living space, warning signs on the exterior of commercial facilities, ventilation and spill kits. DEC states that they are not intended for enforcement (NYSDEC, Policy DSHM-PES-05-03, pesticide storage guidelines, issued June 4, 1991, revised August 11, 2005).

New York's application records are set by statute. For each commercial application, DEC's guidance lists the EPA registration number, the product name, the quantity of each pesticide used, the date applied and the location by address with its five-digit ZIP code, kept for at least three years (NYSDEC, OGC 3, recordkeeping and reporting of commercial applicators, issued July 10, 1998). The annual report for the prior calendar year is due February 1, and DEC accepts it only electronically (NYSDEC, Pesticide Reporting Law, checked November 12, 2026).

In FieldRanger the current inventory in storage is the warehouse count. Each checkout lowers the count of the warehouse it came from, and that figure supports the yearly letter to the fire department. Product carried back to the shelf unused is corrected by hand. The quantity logged on each job, with its address and date, is the raw material of the February report. FieldRanger's custom reports export to Excel or CSV; the report itself is filed on DEC's system.

Registration numbers, establishment numbers and lot codes on the label

Three numbers sit on a pesticide container. The EPA Registration Number identifies the company holding the registration and the product. The EPA Establishment Number, preceded by "EPA Est.", identifies the final establishment where the product was produced, and may appear on the label or on the immediate container (EPA, Label Review Manual chapter 14, identification numbers, revised November 2012). The third is the batch code. EPA requires one on nonrefillable containers, with listed exceptions: "a lot number, or other code used by the registrant or producer to identify the batch". The same chapter groups storage instructions under the label heading "Storage and Disposal" within the directions for use, so the shelf follows each product's label (EPA, Label Review Manual chapter 13, storage and disposal, revised July 2013). Neither the federal application record nor New York's asks for the batch code.

A company that records the lot anyway can answer a question the required records cannot: which properties received product from a batch that a manufacturer recalls or a customer complains about. In FieldRanger the lot travels as a picture: the technician photographs the label panel, with the registration number, the establishment number and the lot code in frame, and the photo attaches to the work order and syncs to the customer's HubSpot record.

Warehouse stock, truck stock and the checkout count

Pest control stock sits in two places: the shelf at the shop or branch, and the truck. FieldRanger counts both: each technician's truck can be its own stock location beside the warehouses, so what rides in a truck is counted on the truck. A technician checks product out of a named warehouse, that warehouse's count drops, and the amount applied is logged on the job.

Dedicated pest control platforms go further here. PestPac's material tracking page describes following chemicals "from distributor to warehouse to technician truck and back", an EPA registration number stored with every chemical, and state-mandated reports completed in the field, naming California and Arizona reports. The page does not mention HubSpot (PestPac, material tracking, checked November 12, 2026). A company that needs a state use report built from the product record is better served by a platform of that kind.

Low-stock warnings and the seasonal reorder

Stock demand follows the service lines. A mosquito program draws on one set of products, termite bait stations on another and rodent exclusion on a third. In FieldRanger a warehouse that falls low raises a low-stock warning and a reorder reminder. FieldRanger does not raise the purchase order; the office places it with the distributor or through accounting.

Last year's materials lines record what each service line actually used. Built into a custom report and downloaded as CSV or Excel, they become the usage history from which this year's reorder levels are set.

A termite treatment from warehouse shelf to service record

  1. The treatment is sold on a HubSpot deal; once won, the deal turns into a job that keeps the deal's context.
  2. The dispatcher assigns it to a technician licensed for the termite category, matched by certification.
  3. The technician checks the termiticide and the bait stations out of the branch warehouse, whose count drops by what was taken.
  4. At the house the clock-in records the location, and the technician works the checklist: the area treated, the stations placed, the conducive conditions found.
  5. The technician photographs the label panel with its registration number and lot code, and logs the amount applied against the job.
  6. The customer signs on the phone, and the completed work order produces the invoice.
  7. The photos and the completion reach the HubSpot timeline, and the office receives a low-stock warning if the warehouse has dropped below its reorder level.

Product cost per visit and job margin

Materials logged per job give the product cost behind each visit, and revenue reports show job revenue and margin by customer or service type. A general pest account that uses more product than its neighbors on the route shows a thinner margin before the agreement comes up for renewal. The calendar side of the same visits, including license-based assignment and callbacks, is on pest control dispatch software.

Gaps in FieldRanger's pest control inventory

  • EPA registration numbers and lot codes travel on label photos and material names.
  • No state pesticide use report produced from the record; New York's report is filed on DEC's system.
  • No purchase orders to distributors, and no return-to-stock step for unused product.
  • No checkout restricted by certification; the control is the job assignment.
  • Compliance with storage and record rules rests with the licensed business, which checks its state's rule.
  • Plans are priced per technician on pricing; the trial runs 14 days with no card.

Frequently asked questions

What is pest control inventory software?

Software that tracks the pesticides, baits, traps and equipment a pest control company holds, where each sits and which service used it. FieldRanger checks product out of a specific warehouse, logs the amount on the job and sends low-stock warnings, with the jobs tied to HubSpot customers.

What records are required for restricted use pesticide applications?

Under 40 CFR 171.303, state plans require certified commercial applicators to record the customer's name and address, the location, the area and site treated, the date and time, the product name, the EPA registration number, the amount applied and the applicator's name and certification number, and to keep the records for two years.

How long must pesticide application records be kept in New York?

At least three years. DEC's guidance lists the EPA registration number, product name, quantity, date applied and address with ZIP code for each commercial application, and the annual report is due February 1.

Should pest control service records include lot numbers?

EPA requires a batch code on nonrefillable containers, but neither the federal application record nor New York's asks for it. Recording it lets a company find every property that received a recalled or disputed batch; in FieldRanger a photo of the label panel on the work order carries it.

Can pest control inventory software track product on each truck?

Yes. In FieldRanger each technician's truck can be its own stock location beside the warehouses, so product on the truck is counted where it sits.

Does FieldRanger warn when pesticide stock runs low?

Yes. A warehouse that falls low raises a low-stock warning and a reorder reminder in FieldRanger. Ordering from the distributor happens outside FieldRanger.

New York asks for the registration number, the quantity, the date and the ZIP code of every commercial application; in FieldRanger the quantity, date and address sit on the job that used the product, and the label photo beside them carries the registration number. Licensed assignment of those jobs is covered under pest control dispatch software, the trade as a whole under pest control software, and the per-technician plans on pricing, where Start free trial asks for no card during its 14 days.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo