Industry

Dumpster Dispatch Software:Waste Management and Garbage Routes Scheduling in FieldRanger and HubSpot

Dumpster dispatch software on HubSpot: FieldRanger books roll-off drops, swaps and pulls, runs front-load routes and plans each truck around landfill hours.

Updated 8 min read

Dumpster dispatch software assigns roll-off drops, swaps and pulls and commercial front-load routes to trucks and drivers, then orders each truck's day around the containers in the yard and the landfill's hours. FieldRanger does this inside HubSpot: each rental is a deal, each container move is a job, and each driver's route builds automatically.

The board is the daily side of waste management software. Container records, rental billing and truck maintenance are covered there and on the fleet page; this page covers the decisions a dispatcher makes each morning and again at noon. Three of them fill the day: which empty goes out on which truck, which full container reaches the scale before it closes, and which front-load accounts share a route day.

Roll-off work orders: drops, swaps, pulls and dump-and-returns

Roll off dispatch software works in container moves, and each move asks something different of the truck. The four common moves differ in what leaves the yard, what comes back and whether the landfill sits in the middle.

Roll-off work orders and what each asks of the truck
Work orderTruck leaves withTruck returns withLandfill or transfer station
Drop (delivery)An empty container of the rented sizeNothingNo
Swap (exchange)An empty container of the same sizeThe full containerYes, before the full box can be reused
Pull (final removal)NothingThe full containerYes
Dump and returnNothingThe same container, emptied and set backYes, in the middle of the job

A customer can book a drop online, and in FieldRanger each move is its own job for the same customer, so a rental with two swaps leaves four completions on the customer's HubSpot timeline: the drop, both swaps and the pull. A QR scan at each move checks the container out to the job or back into the yard. The equipment availability calendar answers the question a swap depends on: whether an empty of the right size is free on the morning the customer wants it.

Swap chains and empty containers

A swap starts in the yard, not at the customer. The truck leaves with an empty of the size it is replacing, trades it for the full one, takes the full one to the scale, and the emptied box then becomes the empty for the next swap of that size. One truck's morning can therefore run as a chain: yard, swap, landfill, swap, landfill, pull.

The chain is the dispatcher's design. FieldRanger builds each driver's route automatically and sequences stops to cut drive time, and its routing contains no rule for container sizes or landfill trips. The dispatcher books the chained jobs in time order on the driver's calendar, with the container size in each job's instructions, and conflict detection warns if two swaps land on the driver at once. Multi-technician views show every driver side by side, so a 20-yard swap that does not fit one truck's chain moves to the truck already carrying a 20 with one drag.

Landfill hours and scale cutoffs

The scale house sets the end of a roll-off route. Loudoun County's landfill in Virginia opens Monday through Saturday from 8 a.m. to 4 p.m.; "The main gate closes at 4:00 p.m. All customers must return to the scales by 4:30 p.m." It accepts only waste generated in Loudoun County, requires commercial customers bringing construction and demolition waste to provide written documentation of its origin, and charges $85 a ton for C&D with an $8 minimum (Loudoun County, landfill, checked November 12, 2026). The Rockingham County and Harrisonburg landfill, also in Virginia, opens Monday through Saturday from 7 a.m. to 4:30 p.m., and commercial haulers "will need to arrive before 4:15 pm" (Rockingham County, landfill, checked November 12, 2026).

Holidays move both. On November 25, 2026, the day before Thanksgiving, Loudoun closes at noon and Rockingham at 11 a.m. A pull booked for that afternoon finds both scales closed, and its full container waits on the truck or in the yard until Friday unless the pull moves to the morning. FieldRanger has no feed of landfill hours, so the dispatcher moves that afternoon's pulls with bulk scheduling once, and the drivers receive alerts for the change.

The cutoff sets the last pull of each day. FieldRanger's job-to-job travel time and mileage estimates show how long the stops take to reach one another; the drive from the last stop to the scale is the dispatcher's figure. A late swap request therefore goes to the truck that can still reach the scale, and a pull that cannot make it is booked first thing the next morning. At the scale, the driver photographs the ticket onto the pull's work order. For the C&D origin rule, the work order on the driver's phone carries the job address, and the office confirms with the landfill whether that record serves as the written documentation it asks for.

Heavy loads and container sizes

Weight, not volume, limits some containers. EPA's volume-to-weight table lists concrete at 860 pounds per cubic yard, dirt and sand at 929 and mixed construction and demolition debris at 417 (EPA, volume-to-weight conversion factors, April 2016). On the Interstate System, federal rules cap gross vehicle weight at 80,000 pounds, a single axle at 20,000 and a tandem axle at 34,000 (23 CFR 658.17, checked November 12, 2026); states set their own limits on other roads.

A 30-yard container filled with dirt holds 27,870 pounds at EPA's factor, 82 percent of the tandem-axle limit before the container and the truck itself are counted. The same container filled with mixed C&D holds 12,510 pounds. Dispatch therefore matches size to material when the order is taken: dirt, concrete and roofing jobs get the small container, and the restriction goes in the customer notes so every driver sees it before the drop. The load photo taken before hoisting is the record of what went in.

Commercial front-load routes and route days

Waste management scheduling software for front-load work runs on service agreements rather than rentals. A restaurant, an apartment complex or a store keeps a steel container on site, and the agreement fixes its size, the pickups per week and the weekdays. FieldRanger holds each agreement as a recurring job template, so the pickups generate themselves on the agreed days, and territory management assigns each service zone to its drivers. FieldRanger then builds the day's route of front-load stops automatically, and each agreement can be charged automatically to the account's card on file.

Two parts of a front-load route stay with the dispatcher. The truck compacts as it goes, and FieldRanger's routing has no truck-capacity rule, so the number of accounts on a route day is set from the tip weights the scale tickets record. Extra pickups arrive as one-off requests, through a call, a HubSpot form or online booking, and are added to the day's route; dynamic rerouting adjusts the stops around them. A photo of an overflowing container or contaminated recycling attaches to the work order and syncs to the account's HubSpot record, which is the evidence behind an overage charge. Route building and stop order in detail are covered on waste collection routing software.

When a holiday closes the landfill on a route day, that day's stops move. Bulk scheduling moves a whole day of front-load stops at once, and SMS notifications through Twilio tell each account of its new day.

Same-day calls and the driver's day

Waste management dispatch software is tested at midday, when the morning plan meets the afternoon's calls. A contractor needs a swap before an afternoon inspection; a store reports a blocked container; a driver's hoist leaks. Vehicle tracking shows every truck's real-time position on a live map, capacity planning flags a driver whose day is already full, and the dispatcher drags the new job onto the truck that can absorb it. The driver receives an alert for the new assignment, and the job appears in the mobile app with the address, the container size and the placement instructions.

Arrival windows matter at both ends of a rental. A drop at a building site is promised before the crew starts, and a pull at a house is promised for the day the customer asked for. FieldRanger sets the window on each job and tracks on-time performance against it, and the technician performance report shows each driver's on-time arrivals. Skill-based assignment keeps each truck class with drivers who hold the license it requires. Methods shared across trades are covered on dispatch software.

Dumpster dispatch limits in FieldRanger

  • No container telematics: no GPS or fill sensor on containers. A container's position is its last QR scan.
  • No landfill hours, scale-house or ticket integration; tons are entered from the photographed ticket.
  • No truck capacity, weight or container-size rule in routing; the dispatcher matches them.
  • No cart-level residential routing.

Frequently asked questions

What is dumpster dispatch software?

Software that assigns roll-off drops, swaps and pulls and front-load routes to trucks and drivers, and orders each day around container availability and landfill hours. FieldRanger does this inside HubSpot, with each container move its own job for the customer.

What is roll off dispatch software?

Software that schedules roll-off container moves, matches each swap to an empty of the right size and a truck that can reach the scale in time, and records each move. In FieldRanger containers are equipment checked out and in by QR scan.

What is the difference between a roll-off swap and a pull?

A swap replaces a full container with an empty of the same size, so the truck leaves the yard loaded. A pull removes the container for good, and the truck leaves the yard empty. Both end at the landfill or transfer station.

How do landfill hours affect roll-off dispatch?

They set the last pull of the day. Rockingham County's landfill in Virginia requires commercial haulers to arrive before 4:15 p.m., and Loudoun County's closes its gate at 4:00 p.m. A pull that cannot reach the scale in time is booked for the next morning.

Can waste management scheduling software run commercial front-load routes?

FieldRanger holds each service agreement as a recurring job template on its agreed weekdays and builds the route of stops automatically. The number of accounts per route day is set by the dispatcher, because routing has no truck-capacity rule.

Does dumpster dispatch software track containers by GPS?

FieldRanger does not put GPS on containers. Trucks are tracked by GPS on a live map, and each container's location is its last QR check-out or check-in.

How much does waste management dispatch software cost?

FieldRanger is priced per technician, which for a hauler means per driver, on the plans listed on the pricing page; the trial runs 14 days with no card.

Every roll-off day in FieldRanger is a chain of container moves with a scale at the end of it, and every front-load day is a set of agreements on their weekday; both trace back to HubSpot deals the sales team already owns. The rest of the trade is on waste management software, stop order on waste collection routing software, and per-driver plans with a 14-day Start free trial on pricing.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo