Industry
Waste Collection Routing Software:Commercial Lifts and Roll-Off Runs in FieldRanger and HubSpot
Waste collection routing software on HubSpot: FieldRanger balances route days by lift count, orders each truck's stops and plans the tip around station hours.
Waste collection routing software divides a hauler's accounts into route days and then orders each truck's stops: which lifts come first, where the truck tips, and how the day ends before the transfer station gate closes. FieldRanger builds each driver's route automatically from the day's jobs inside HubSpot and adjusts it when a stop is added.
Routing is one part of waste management software, and it answers a narrower question than dispatch. Dispatch decides which driver and truck take a job, and on which day; that is the subject of dumpster dispatch software. Routing takes one truck's jobs for the day as given and puts them in order, and it also sets the size of each route so that the trucks finish their days at a similar hour.
Macro routing and micro routing on a collection route
EPA's collection efficiency workbook divides the work into two phases. Macro routing divides the total area served into the area for one collection day and then the area for each crew and vehicle on that day. Micro routing specifies "the specific path that each individual crew vehicle will follow" (EPA, Getting More for Less: Improving Collection Efficiency, EPA530-R-99-038, November 1999).
FieldRanger has a tool for each phase. Territory management defines service zones and assigns drivers to them, and recurring job templates put each commercial account's lifts on its agreed weekdays, which together make the macro plan. Auto-routing then makes the micro plan: FieldRanger builds each driver's route for the day and sequences the stops to cut drive time and fuel cost. Service area mapping shows the zones on a map, with the gaps between them.
Garbage route software for residential curbside work runs the same two phases on street segments and carts. FieldRanger routes jobs, so its fit is the commercial front-load route, where each stop is an account with a container and an agreement, and the roll-off run, where each stop is one box.
Route days by service area and the balancing formula
EPA's manual routing method starts with a count. To define balanced service areas, it suggests starting from "total customers to be served, multiplied by collections per week, divided by collection days" (EPA530-R-99-038, page 21). The result is the number of collections each day must hold.
A commercial hauler with 210 front-load accounts, collected an average of twice a week over a five-day week, has 84 lifts a day to place: 210 × 2 ÷ 5. With two front-load trucks, each route day starts near 42 lifts. The account count and the frequency are the example's inputs; the arithmetic is EPA's.
The count is a starting point. The same EPA table lists what moves it: the time each stop takes, travel between stops, and nonproductive time to the disposal site and the vehicle yard. A route of 42 restaurant lifts on one boulevard and a route of 42 lifts spread across an industrial park are not the same day's work.
In FieldRanger, the macro plan lives in three places. Each account's recurring job template carries its weekdays. Each territory carries its driver. Capacity planning balances workload and prevents a driver's day being booked past what it can hold, which is the check that the 42 assigned lifts fit the hours in the shift.
Stop order inside one garbage truck route
EPA's heuristic routing guidelines, first published in 1974 and reprinted in the 1999 workbook, set the rules a route path is tested against.
- Routes should not be fragmented or overlapping; each should be compact, with street segments clustered in one area.
- Total collection plus handling time should be reasonably constant for each route, so workloads are equalized.
- The route should start as close to the garage or yard as possible.
- Waste on heavily traveled streets should not be collected during rush hours.
- Series of clockwise loops keep left turns to a minimum, since left turns are "more difficult and time-consuming than right turns".
- On a steep hill, collection should run downhill, and higher elevations should be at the start of the route.
FieldRanger's auto-routing addresses the first and the fourth directly: it sequences stops to cut drive time, and it uses real-time traffic data for ETAs and route adjustments, so a boulevard at rush hour is priced at its rush-hour speed. FieldRanger does not model turn direction, side of street or elevation, so a garbage truck route optimization software comparison that rests on left-turn rules or hill order is one FieldRanger does not enter. EPA's own last step applies either way: drivers "drive routes to test for practicality", and FieldRanger's route history keeps each day as it was driven.
Transfer station choice and gate hours
A front-load route ends at a tip, and the station chosen decides how much of the day the drive to it consumes. King County lists different hours for neighboring stations. Factoria in Bellevue is open 6:30 a.m. to 4 p.m. on weekdays. Bow Lake in Tukwila is open 24 hours Monday through Thursday and until 11:30 p.m. on Friday. South County in Algona is open 7 a.m. to 4:30 p.m. on weekdays, and all three open 8:30 a.m. to 5:30 p.m. on weekends (King County, solid waste facilities, checked November 12, 2026). The county describes Cedar Hills as its only active landfill, so the stations are where collection trucks unload.
A route east of Lake Washington that runs late on a weekday has a choice: tip at Factoria before 4 p.m., or drive to Bow Lake and add that drive to the route. The first keeps the route short and fixes its end time. The second removes the deadline and adds miles.
In FieldRanger the tip can be entered as its own job at the station's address, so it takes a place in the day's sequence, and job-to-job travel time and mileage estimates show what the drive to each station costs. The station's hours can be recorded as an arrival window on that job, and FieldRanger tracks on-time performance against it.
Lift count, minutes per lift and route balance
EPA's second guideline asks for equal collection and handling time across routes, and FieldRanger measures that time at the stop. Each lift is a job, the driver clocks in and out of it, and the time is logged against that job with the location of the clock-in. Route history shows the path and the stop order the truck actually ran.
Two routes with the same lift count can then be compared by what they took. Technician performance reports show completion rates and productivity by driver, and job-to-job travel estimates separate the minutes spent driving from the minutes spent at containers. A route that runs long because its accounts are far apart needs fewer lifts. A route that runs long because three accounts keep their containers behind locked gates needs a note on those accounts, and a photo of the locked gate on the work order makes the case to the customer.
Truck records sit beside the route records. Fuel monitoring, mileage logs and utilization reports for each truck are covered on waste management fleet software, and they show whether the long route also burns more fuel per lift.
A route rebalance from route history to new route days
Route balance drifts as accounts are won and lost. A rebalance in FieldRanger runs in this order.
- Read the route history for each front-load route over several weeks, and export the job-time report as CSV or Excel.
- Compare lifts per route day against hours on the route, using the job-level times rather than the planned stop count.
- Choose the accounts to move, starting with those on the edge of a long route's territory, and check on the service area map that each one lies next to the shorter route.
- Change the recurring job template of each moved account to its new weekday, and reassign the territory boundary if the move is permanent.
- Move the coming weeks' lifts with bulk scheduling, and send each moved account its new collection day by SMS through Twilio.
- Once the new days have run for a few weeks, read the route history again and confirm that the hours on the rebalanced routes fall within the range the dispatcher set.
The new weekday also belongs on the customer's record. Notes and updates are logged to the HubSpot timeline, so the account manager who renews the agreement sees that the collection day changed, and when.
Roll-off runs and the scale in the route
A roll-off route has fewer stops and a different shape. The truck carries one box, so each pull is followed by a trip to the scale, and each swap is a pull and a drop at the same address with the station in between. The chain of moves, and which empty goes out on which truck, is set on dumpster dispatch software.
Once the chain is set, FieldRanger plans the run as one multi-stop route and estimates the travel between each stop, the station and the yard. When a same-day pull is added, dynamic rerouting adjusts the stops behind it, and the driver sees the change in the app. Turn-by-turn navigation with voice guidance takes the driver to each site, which helps at a new construction address with no house number yet.
Residential curbside routes and hauler route systems
Waste management routing software for a municipal or residential fleet solves a different problem. Its stops are carts, and its routes are built street segment by street segment to the capacity of an automated truck. EPA's heuristics were written for that work, and residential route systems apply them with cart counts, set-out rates and weights per stop.
FieldRanger is not built for it. Its routes are made of jobs, and a hauler that would need one job per cart, every week, is better served by a hauler route system with cart-level routing and onboard data. The hauler that runs commercial and roll-off work, sells those accounts through HubSpot, and wants each route stop tied to the account's agreement and photos is the one FieldRanger fits.
Waste collection routing limits in FieldRanger
- No routing by cart or street segment, and no set-out rates or weights per stop.
- No vehicle capacity, load or axle-weight rules; route size is set by the dispatcher through lift counts and capacity planning.
- No model of transfer station or landfill gate hours; tips and closing times are entered as jobs and windows.
- No turn-direction, side-of-street or elevation rules.
- No RFID cart tags, onboard scales or lift counters on the truck.
- No weather feed; a storm day is rerouted by the dispatcher on the live map.
Frequently asked questions
What is waste collection routing software?
Software that divides a hauler's accounts into route days and orders each truck's stops, including the tip at a transfer station or landfill. FieldRanger builds each driver's route automatically from the day's jobs inside HubSpot and adjusts it as stops are added.
What does garbage truck route optimization software optimize?
Stop order and route size. EPA's routing guidelines ask for compact routes, equal collection time across routes, a start near the yard and fewer left turns. FieldRanger sequences stops to cut drive time with live traffic data; it does not model turn direction or hills.
How many stops should a garbage route have?
EPA's starting formula is total customers multiplied by collections per week, divided by collection days. For 210 accounts collected twice a week over five days, that is 84 lifts a day, split across the trucks and then adjusted for travel and tipping time.
Can garbage route software plan residential curbside routes in FieldRanger?
No. FieldRanger routes jobs, not carts, so residential curbside routing by street segment belongs to hauler route systems. Commercial front-load and roll-off routes fit FieldRanger.
Does garbage truck route software account for transfer station hours?
FieldRanger has no feed of station hours. The dispatcher enters the tip as a job at the station with an arrival window, and FieldRanger estimates the travel time to it.
Does waste management routing software work with HubSpot?
FieldRanger runs inside HubSpot. Each route stop is a job on an account sold in HubSpot, and completions and route-day changes are logged to the account's timeline.
EPA's guidelines ask for routes of equal length that start near the yard; FieldRanger supplies the job-level times that show whether a hauler's routes meet that test, and the tools to move accounts until they do. The trucks themselves are on waste management fleet software, the full trade on waste management software, and plans per driver on pricing, where Start free trial runs 14 days with no card asked.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo