Template
Electrician Invoice Template:Every Field and a Filled EV Charger Circuit Example
An electrician invoice template to bill from: license number, permit and inspection lines, materials by part, and a filled Houston EV charger example.
An electrician invoice template records the work so a customer and an inspector can both check it: the license number, the permit and inspection result, labor by hours and rate, materials by part and size, sales tax, the total and the terms. The example fills every field for a Level 2 EV charger circuit in Houston, Texas.
The field list sits with the free field service templates of FieldRanger, the electrical contractor software that runs inside HubSpot. Three rows set an electrical invoice apart from a general one: the license and regulator lines a state can require, the permit and inspection, and a materials list precise enough to match the circuit on the wall.
Electrician invoice template: fields and what goes in each
The table lists every field, and the page offers the same rows as a free .xlsx download with no sign-up. A Word, Google Docs or spreadsheet copy follows it row for row.
| Field | What goes in it |
|---|---|
| Contractor | Business name, address, telephone and billing email |
| License number | The electrical contractor license number, where the state licenses electrical contractors |
| Master electrician of record | Name and license number of the master electrician the work runs under, where the state or city requires one |
| Regulator statement | The licensing agency's name and complaint contact, where the state requires it on invoices |
| Invoice number, date and due date | A unique number, the date issued and the date payment falls due |
| Customer and job site | The person billed, the service address, and where the panel and the new equipment sit |
| References | Estimate number and acceptance date, work order number, permit number |
| Work performed | The circuit or equipment by panel, breaker size, voltage, conductor size and run |
| Tests | What was tested and the result: torque, voltage under load, device self-test |
| Inspection | Inspection type, date and result, and who scheduled it |
| Labor lines | Each worker's classification, hours, rate and line total |
| Materials lines | Each part by size, rating and type, with quantity, unit price and line total |
| Customer-supplied equipment | Equipment the customer bought, named so that its warranty stays with the customer |
| Permit and inspection fees | Each fee from the jurisdiction's schedule, billed at cost, and any reinspection fee |
| Sales tax | The rate, the jurisdictions in it and the lines it applies to |
| Total and balance due | The total, payments received and the amount owed |
| Payment terms | Due date and the payment methods accepted |
| Warranty | Workmanship warranty, and where the equipment warranty comes from |
The invoice below bills a circuit priced on an electrical estimate template and installed under a permit.
Electrician invoice example: Level 2 EV charger circuit in Houston, Texas
The homeowner bought the charger; the electrician ran a new 60-amp circuit to it and passed the city's inspection. The business, customer and prices are illustrative; the permit fees, the regulator statement and the tax rate are the published ones.
| Field | Example entry |
|---|---|
| Contractor | Example Electric Co. LLC, 900 Example Street, Houston, TX 77007 · 713-555-0145 · billing@example.com |
| License number | Electrical contractor license TECL 00000 (example) |
| Master electrician of record | J. Alvarez, master electrician license 000000 (example) |
| Regulator statement | Regulated by The Texas Department of Licensing and Regulation, P.O. Box 12157, Austin, Texas, 78711, 1-800-803-9202, 512-463-6599; website: www.tdlr.texas.gov/complaints |
| Invoice number, date and due date | EL-2026-0657 · November 10, 2026 · due November 25, 2026 |
| Customer and job site | Hannah Brooks, 2215 Example Lane, Houston, TX 77008 · 200 A panel on the garage's outside wall; charger inside the garage |
| References | Estimate EST-2026-0611, accepted October 28, 2026 · work order WO-2026-2240 · City of Houston electrical permit 0000000 (example) |
| Work performed | New 240 V individual branch circuit on a 60 A two-pole breaker; two 6 AWG copper conductors and a 10 AWG copper ground in 45 ft of 3/4-inch EMT; charger hardwired and set to 48 A |
| Tests | Terminations torqued to the manufacturer's values; charger self-test passed; 10-minute test charge at 48 A, 236 V under load |
| Inspection | Final electrical inspection passed November 9, 2026; scheduled by the contractor |
| Customer-supplied equipment | ChargePoint Home Flex, purchased by the customer; installation only |
| Payment terms | Net 15 · card, bank transfer or check |
| Warranty | Workmanship one year; charger under the manufacturer's warranty to the customer |
| Line | Quantity | Unit price | Line total |
|---|---|---|---|
| Journeyman electrician | 4.5 h | $120.00 | $540.00 |
| Apprentice | 4.5 h | $55.00 | $247.50 |
| 60 A two-pole circuit breaker, panel-matched, non-GFCI | 1 | $38.00 | $38.00 |
| 6 AWG THHN copper, black | 52 ft | $1.45 | $75.40 |
| 6 AWG THHN copper, red | 52 ft | $1.45 | $75.40 |
| 10 AWG THHN copper, green, equipment ground | 52 ft | $0.52 | $27.04 |
| 3/4-inch EMT conduit, 10 ft lengths | 5 | $9.80 | $49.00 |
| 3/4-inch EMT set-screw connectors | 4 | $1.10 | $4.40 |
| 3/4-inch EMT set-screw couplings | 5 | $0.95 | $4.75 |
| 3/4-inch one-hole straps | 12 | $0.40 | $4.80 |
| 3/4-inch LB conduit body with cover and gasket | 1 | $7.80 | $7.80 |
| Materials subtotal | $286.59 | ||
| Sales tax on materials, 8.25% (state 6.25%, City of Houston 1%, Houston MTA 1%) | $23.64 | ||
| City of Houston permit: EV charging outlet, Level 2, at cost | 1 | $100.71 | $100.71 |
| City of Houston permit administrative fee, at cost | 1 | $33.56 | $33.56 |
| Total | $1,232.00 | ||
| Balance due | $1,232.00 |
The breaker and wire sizes follow the charger's installation guidance. ChargePoint pairs a 60 A circuit with a 48 A maximum load for a hardwired Home Flex and calls for a new, dedicated, non-GFCI two-pole breaker (ChargePoint, pre-installation guidelines for electricians, checked November 2026). The same page sizes the circuit at 125 percent of the maximum load, since the charger is a continuous load, and limits the terminal to 6 AWG wire. The Department of Energy's Alternative Fuels Data Center notes that the National Electrical Code treats EV charging as a continuous load and that Article 625 covers charging equipment (AFDC, Charging Electric Vehicles at Home, checked November 2026).
Texas license, permit and tax rules behind the example
The license and regulator rows are Texas requirements. The Texas Department of Licensing and Regulation requires the contractor's name, address, telephone number and license number "on all proposals, invoices, and written contracts", and requires invoices and written contracts to carry the regulator statement shown in the example (TDLR, Electricians Compliance Guide, section 5.1.1, checked November 2026). The same guide requires a company to assign a master electrician's license as its master electrician of record, and requires the letters "TECL" before an electrical contractor's license number on vehicle lettering.
The permit rows come from the city's own form. Houston's electrical permit application lists a Level 2 EV charging outlet at $100.71 and an administrative fee of $33.56 for issuing each permit, with a $91.06 minimum fee and a $94.00 reinspection fee (City of Houston, Electrical Building Permit Application, Form CE-1057, revised September 2026). The form requires the master electrician's signature and makes the electrical contractor responsible for scheduling inspections. TDLR leaves inspection to the city: the local inspecting authority "is responsible for inspecting work" in its area (same compliance guide, section 2.1). The invoice records the passed inspection because it is the customer's evidence that the circuit was approved.
The tax row taxes the parts and not the labor. The Texas Comptroller states that labor to repair, remodel or restore residential real property is not taxable, and that under a separated contract the contractor collects sales tax on the materials, charged at no less than their cost (Texas Comptroller, Publication 94-116, March 2007, checked November 2026). The Houston rate is 6.25 percent state, 1 percent city and 1 percent Houston MTA, for 8.25 percent (Texas Comptroller, current sales tax rate file, fourth quarter 2026). Charging materials apart from labor is what makes the contract separated.
Electrical contractor invoice template for commercial work
An electrical contractor invoice template for a commercial customer keeps the same rows and changes three. Tax changes first: the same Comptroller publication treats repair and remodeling of nonresidential real property as taxable on the total charge, labor included, so the tax line covers every line. A commercial customer's purchase order number joins the references, and a lien waiver row is added where a general contractor or lender requires one on payment. The general contractor invoice template carries the change order, deposit and retainage rows that larger electrical jobs add.
Electrician invoice instructions: circuit, inspection and parts
- Copy the contractor, license, master electrician and regulator rows from the master copy; they change only when a license does.
- Enter the customer, the job site, and where the panel and the new equipment sit.
- Quote the estimate, the work order and the permit number.
- Describe the circuit: breaker size, voltage, conductors and their size, raceway and length, and the equipment served.
- Record the tests and the inspection result with its date.
- Enter labor by classification, hours and rate.
- List each material by size, rating and type, and name any equipment the customer supplied.
- Bill each permit fee at the amount on the jurisdiction's schedule.
- Apply sales tax under the state's rule for the property type and contract, with the rate and its parts.
- Before sending, check that the breaker and wire on the invoice match the permit and the work order, and that the lines add to the total.
Contractor invoicing software and the electrician invoice
Typed by hand, the Houston invoice draws on four separate papers: the estimate, the work order, the permit receipt and the inspection result. A parts list rebuilt from memory loses the couplings and the straps.
In FieldRanger, the invoice is generated from the completed work order. A won HubSpot deal becomes the job with its context carried over, and job status shows on the deal record. Electricians clock in and out with time logged against each job in the mobile app built for technicians in the field, so the labor lines come from the clock. Job completions, notes and updates are logged to the HubSpot timeline. Payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks. The contractor invoicing software page sets out the invoice in FieldRanger.
FieldRanger does not pull permits or schedule city inspections. The permit number, the fees and the inspection result are entered on the work order by the office, and the invoice carries them from there.
Fill it in here, or download the spreadsheet
The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.
Frequently asked questions
What should an electrician invoice include?
The contractor's details and license number, any regulator statement the state requires, the invoice number and dates, the customer and job site, references to the estimate, work order and permit, the work performed, tests, the inspection result, labor by hours and rate, materials by part, permit fees, sales tax, the total and the payment terms.
Does an electrician invoice need a license number in Texas?
Yes. TDLR requires the electrical contractor's name, address, telephone number and license number on all proposals, invoices and written contracts, and requires invoices and written contracts to carry the TDLR regulator statement.
Do electricians charge sales tax on labor in Texas?
Not for residential repair and remodeling: the Comptroller treats that labor as not taxable, and under a separated contract tax is collected on the materials. Repair and remodeling of nonresidential property is taxable on the total charge.
How to bill permit fees on an electrical invoice?
As separate lines at the amounts on the jurisdiction's fee schedule, with the permit number in the references. In Houston, a Level 2 EV charging outlet permit is $100.71 plus a $33.56 administrative fee under Form CE-1057, revised September 2026.
Is there a free electrician invoice template?
Yes. The page offers a free .xlsx download with no sign-up: a Template sheet with every field and a table for the labor and materials lines, and a Sample sheet with the Houston invoice.
The Brooks garage circuit on file
Invoice EL-2026-0657 leaves the customer's record holding the permit number, the inspection date and the 48 A setting, which is what the next electrician needs before adding a second charger to the same 200 A panel. The estimate and work order behind this bill have their own free field service templates. FieldRanger is sold per technician, as listed on pricing; a 14-day Start free trial, with no card, covers the time from permit application to final inspection on a job like this one.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo