Template
Job Site Safety Checklist:Daily OSHA 1926 Items, Inspection Timing, a Toolbox Talk Record and a Filled Birmingham, Alabama Addition
Job site safety checklist built from OSHA 29 CFR 1926: daily items, inspection timing, a toolbox talk record, filled for a home addition in Birmingham, Alabama.
A job site safety checklist is the competent person's record, made before work starts each day, that the site meets the OSHA construction standards for the work planned: fall protection, scaffolds, ladders, excavations, temporary power, extinguishers, first aid and protective equipment, plus the toolbox talk. The example below fills one day on a home addition in Birmingham, Alabama.
FieldRanger, maker of field service software that runs inside HubSpot, keeps the form among its free field service templates. Every row cites the paragraph of 29 CFR part 1926 it comes from, as published on osha.gov and checked in November 2026, so a reader can confirm the rule rather than trust the form.
Job site safety checklist items by OSHA 1926 subpart
Each row below is a line on the form, with a result box: OK, corrected, or work held. A row that does not apply that day, such as an excavation on a site without one, is marked "none on site" rather than left blank.
| Item | Rule | What the competent person records |
|---|---|---|
| Site inspection by a competent person | [1926.20(b)(2)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.20): "frequent and regular inspections of the job sites, materials, and equipment" | Name of the competent person, time of the walk |
| Defective tools and equipment | [1926.20(b)(3)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.20): tagged, locked out or removed | Item, tag applied, where it went |
| Equipment operators | [1926.20(b)(4)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.20): only employees "qualified by training or experience" | Who operates each machine today |
| Unprotected edges | [1926.501(b)(1)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.501): edges 6 feet or more above a lower level protected by guardrails, safety nets or personal fall arrest | Each edge and the system on it |
| Floor and roof holes | [1926.501(b)(4)(i)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.501): holes more than 6 feet above lower levels covered, guarded or worked with fall arrest | Each hole, cover secured and marked |
| Scaffold inspection | [1926.451(f)(3)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.451): inspected for visible defects by a competent person before each work shift | Scaffold ID, time inspected, defects |
| Scaffold platforms and guardrails | [1926.451(b)(1) and (g)(1)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.451): fully planked; fall protection above 10 feet | Platform height, planking, guardrails |
| Scaffold access | [1926.451(e)(1)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.451): access provided when platforms are more than 2 feet above or below the point of access | Ladder, stair tower or ramp in place |
| Portable ladders | [1926.1053(b)(1), (b)(5)(i) and (b)(13)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.1053): 3 feet above the landing; base set at one quarter of the working length; no standing on a stepladder's top | Ladder number, setup checked |
| Damaged ladders | [1926.1053(b)(15) and (b)(16)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.1053): inspected by a competent person; defective ladders tagged "Do Not Use" | Ladder number, defect, tag applied |
| Excavation inspection | [1926.651(k)(1)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.651): daily by a competent person, before work and after every rainstorm | Time inspected, water, cracks, sloughing |
| Cave-in protection | [1926.652(a)(1)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.652): protective system unless in stable rock, or under 5 feet with no indication of a cave-in | Depth, soil, system in use |
| Trench egress and spoil | [1926.651(c)(2) and (j)(2)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.651): ladder within 25 feet of lateral travel at 4 feet deep or more; spoil at least 2 feet from the edge | Ladder position, spoil distance |
| Temporary power | [1926.404(b)(1)(ii)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.404): GFCI on 120-volt, 15- and 20-ampere receptacles not part of permanent wiring, or an assured grounding program | GFCI tested at each source, cords checked |
| Fire extinguishers | [1926.150(c)(1)(i) and (vi)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.150): a 2A unit per 3,000 square feet within 100 feet of travel; a 10B unit within 50 feet of more than 5 gallons of flammable liquid in use | Location, rating, gauge in the green |
| First aid | [1926.50(c), (d)(2) and (f)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.50): certified first-aider where no medical facility is reasonably accessible; kit checked before each job and at least weekly; emergency numbers posted where 911 is unavailable | Kit check date, first-aider, nearest emergency room |
| Head protection | [1926.100(a)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.100): helmets where there is "possible danger of head injury" | Hard hats worn in the work areas listed |
| Eye and face protection | [1926.102(a)(1)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.102): protection when exposed to flying particles and the other listed hazards | Tasks that require it today |
The competent person is defined in 1926.32(f) as one "capable of identifying existing and predictable hazards" who also "has authorization to take prompt corrective measures to eliminate them." The second half is the part a checklist tests. A name on the form belongs to someone who can stop the work, not to whoever arrived first.
Inspection timing in the 1926 standards
A daily job site safety checklist and a job site safety inspection checklist share their rows; the standards set different clocks for them. Some inspections are tied to the shift, some to an event, and some to a calendar.
| Inspection | When | Paragraph |
|---|---|---|
| Excavation, adjacent areas and protective systems | Before the start of work, as needed through the shift, and after every rainstorm or other hazard-increasing occurrence | 1926.651(k)(1) |
| Scaffold and components | Before each work shift, and after any occurrence that could affect structural integrity | 1926.451(f)(3) |
| Cords and plugs under an assured grounding program | Visually before each day's use; tested at intervals not exceeding 3 months | [1926.404(b)(1)(iii)(C) and (E)](https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.404) |
| First aid kit | Before being sent out on each job, and at least weekly on each job | 1926.50(d)(2) |
| Portable ladders | On a periodic basis, and after any occurrence that could affect their safe use | 1926.1053(b)(15) |
| Job site, materials and equipment | Frequent and regular | 1926.20(b)(2) |
The daily checklist carries every row due before the shift. The weekly inspection checklist adds the first aid kit and a full walk of every ladder on site. The checklist does not replace the event rule: a rainstorm at 2 PM puts the excavation row back to "not inspected" until the competent person walks it again.
Header, sign-off and toolbox talk record fields
| Field | What goes in it |
|---|---|
| Company and job | Employer name, job number and site address |
| Date and shift start | Date, start time and the time the checklist was completed |
| Competent person | Name, and the excavation, scaffold or fall protection areas assigned to that person |
| Weather | Rain since the last shift, wind and temperature, because rain triggers the excavation re-inspection |
| Work planned | Tasks on site today, with the areas and heights involved |
| Other employers on site | Subcontractors present and their foreman, since each employer answers for its own workers |
| Work held | Any row that stopped work, the correction and the release time |
| Toolbox talk topic | One hazard on this site today, with the standard it relates to |
| Toolbox talk presenter and time | Who led it, start time and length |
| Attendees | Printed name, employer and signature of each person present |
| Questions and actions | Questions raised and what was done about them |
| Sign-off | Competent person's signature and the time the site was released for work |
Filled daily job site safety checklist: second-story addition in Birmingham, Alabama
The site is day 9 of a two-story rear addition on a house. Alabama has no OSHA-approved State Plan, so federal OSHA covers private employers there (OSHA, State Plans, checked November 2026), and the 1926 paragraphs above apply unchanged. The business, people, weather and findings are samples.
| Field | Sample entry |
|---|---|
| Company and job | Example Magic City Builders LLC · job 2026-044 · 2700 Example Drive, Birmingham, AL 35205 |
| Date and shift start | Monday, November 9, 2026 · shift start 7:00 AM · checklist complete 7:05 AM, released 8:20 AM |
| Competent person | Marcus Reed, site lead: excavation, scaffold and fall protection |
| Weather | 0.8 in. of rain overnight, stopped 5:30 AM · wind light · 54°F |
| Work planned | Frame second-floor walls at 10 ft above grade · set rear wall sheathing from the scaffold · lay the new drain line in trench T-1 |
| Other employers on site | None until 1 PM; electrician arrives for rough-in |
| Item | Result | Entry |
|---|---|---|
| Site inspection | OK | Walked 6:35 to 7:00 AM, M. Reed |
| Defective tools and equipment | Corrected | Extension cord with a cut jacket removed from service and tagged at the trailer |
| Unprotected edges | OK | Second-floor deck, 10 ft: guardrails on the rear and east edges; west edge closed by framed wall |
| Floor and roof holes | OK | Stair opening covered with 3/4 in. plywood, screwed down, marked "HOLE" |
| Scaffold inspection | OK | Frame scaffold S-1 along the rear wall, inspected 6:50 AM, no defects |
| Scaffold platforms and guardrails | OK | Platform at 12 ft, fully planked, top and mid rails on the open side |
| Scaffold access | OK | Ladder frame access on the north end |
| Portable ladders | OK | Extension ladder L-2 to the deck edge at 10 ft: rails 3 ft above the landing, base 2 ft 7 in. out for a 10 ft 4 in. working length |
| Damaged ladders | Corrected | Stepladder L-5: split rail; tagged "Do Not Use" and loaded on the truck |
| Excavation inspection | Work held | Trench T-1, 5 ft 6 in. deep, 24 ft long: 3 in. of water at the bottom; spoil 18 in. from the east edge; no cracks or sloughing at the walls |
| Cave-in protection | OK | Trench box in place for the full working length |
| Trench egress and spoil | Corrected | Ladder moved to the box center, 12 ft from either end; spoil pulled back to 3 ft from the edge |
| Temporary power | OK | GFCI at the temporary pole and on the generator tested; both tripped |
| Fire extinguishers | OK | 2A:10B:C at the addition door, inside 100 ft of all work; second 2A:10B:C 20 ft from the two 5-gallon fuel cans by the generator |
| First aid | OK | Kit checked and restocked this morning (weekly check); emergency room 4 miles; 911 available |
| Head protection | OK | Hard hats on the deck, under the scaffold and in the trench |
| Eye and face protection | OK | Safety glasses for saw cutting and nailing |
| Work held | Released | T-1 pumped dry 7:45 AM, spoil moved, re-inspected 8:05 AM by M. Reed, released 8:20 AM |
| Field | Sample entry |
|---|---|
| Toolbox talk topic | Trench entry after rain: water, spoil distance and the box (1926.651, 1926.652) |
| Toolbox talk presenter and time | Marcus Reed · 7:10 to 7:22 AM |
| Attendees | J. Alvarez, Example Magic City Builders, signed · T. Nguyen, signed · D. Brooks, signed · K. Patel, signed |
| Questions and actions | Whether the box may be moved with someone inside: no; the operator moves it only with the trench empty |
| Sign-off | Marcus Reed, 8:20 AM |
The trench row shows why the event rule matters on a form. The daily walk at 6:50 AM would have passed T-1 on Friday's evidence. The overnight rain put water in the bottom, and the spoil pile was 6 inches inside the 2-foot line, so the row went to "work held" until both were corrected and the competent person walked it again.
Toolbox talk record and the fall protection training certificate
A toolbox talk sign-in and a training record are different documents. The fall protection standard requires a training program for each employee who might be exposed to fall hazards (1926.503(a)(1)) and a written certification record that "shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer" (1926.503(b)(1)). A 12-minute talk on the tailgate does not become that record because it carries signatures.
The talk serves the general duty in 1926.21(b)(2), which requires the employer to instruct each employee "in the recognition and avoidance of unsafe conditions." OSHA's own fall prevention campaign uses the same format: its 13th National Safety Stand-Down to Prevent Falls in Construction ran May 4 to 8, 2026, and a toolbox talk counts as a stand-down activity. The same page reports that falls from elevation accounted for 389 of the 1,034 construction fatalities recorded in 2024 (BLS data) (OSHA, Stop Falls Stand-Down, checked November 2026).
Daily checklist procedure from the gate to the release
- Record the date, weather since the last shift and the work planned, and name the competent person for each area.
- Walk the excavations first if it rained, then the scaffolds, edges and holes, then ladders, power, extinguishers and first aid.
- Mark each row OK, corrected or work held; tag and remove any defective tool or ladder on the spot.
- Hold the work on any row that fails, and write the correction needed beside it.
- Give the toolbox talk on the day's main hazard, and collect each attendee's printed name, employer and signature.
- Re-inspect each held row after the correction and record the release time.
- Before releasing the site, read the form once more: each row has a result, each "work held" row has a release time and a signature, and the excavation and scaffold rows show inspection times inside this shift.
Job site checklist, vehicle inspection and invoice checklist
Three neighbouring checklists cover different subjects and answer to different rules. A job site checklist is the wider form for the job as a whole, from site setup to closeout. The safety checklist above is limited to OSHA's construction standards for the people on the site. A vehicle inspection checklist covers the truck that brought them, under the federal motor carrier rules. After the work, an invoice checklist checks the bill before it goes out.
Work order software and the daily checklist
In FieldRanger, each day is its own job, which matches the standards' clock: the day's checklist sits on that day's job, assigned to the site lead who serves as competent person. Custom checklists carry job-specific rows for quality and compliance, photo documentation attaches the trench and scaffold photos to the work order, and job completions, notes and updates are logged to the HubSpot timeline. Job files, including a scanned toolbox talk sheet, can be kept in Google Drive. The work order software page describes the work order those checklist rows ride on.
One job can carry several technicians, so the whole crew sits on the day's job beside its checklist. The signed toolbox talk sheet remains a separate record, filed by the employer.
Fill it in here, or download the spreadsheet
The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.
Frequently asked questions
What should a job site safety checklist include?
The competent person's walk, defective tools, unprotected edges and holes, scaffolds, ladders, excavations, temporary power, fire extinguishers, first aid, head and eye protection, any work held and its release, and a toolbox talk record with attendee signatures.
What goes on a daily job site safety checklist?
The rows due before each shift: excavations and scaffolds inspected by a competent person, edges and holes protected, ladders set up, GFCIs tested, extinguishers in place, plus the weather since the last shift, which decides whether excavations need a fresh inspection.
When must a trench be inspected under OSHA?
Daily by a competent person, before work starts and as needed through the shift, and again after every rainstorm or other hazard-increasing occurrence, under 29 CFR 1926.651(k)(1).
What is the difference between a job site safety inspection checklist and a daily checklist?
The daily checklist covers inspections tied to the shift. A periodic inspection checklist uses the same rows and adds calendar items, such as the weekly first aid kit check and a full walk of every ladder.
Does a toolbox talk count as OSHA fall protection training?
No. The fall protection standard requires a training program and a written certification record with each employee's name, the training dates and the trainer's or employer's signature. A toolbox talk reinforces that training without replacing it.
Is there a free job site safety checklist PDF?
The page offers the checklist as a free .xlsx download with no sign-up: a Template sheet with every item and a result column, and a Sample sheet with the filled inspection. Excel or Google Sheets saves it as a PDF for printing.
Trench T-1 after the overnight rain
Day 9 opened with one held row and closed it in 80 minutes: 3 inches of water pumped out, a spoil pile pulled back a foot and a half, a ladder moved and a second walk signed at 8:05 AM. Day 10 starts from that record, and if it rains again overnight, from the same row. The work order and estimate forms for the addition are with the other free field service templates. The per-technician cost of running the same checklist in FieldRanger is on pricing, where Start free trial begins 14 days with no card.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo