Template
Free Vehicle Inspection Checklist:Every Item and a Filled Service Truck Example
Vehicle inspection checklist for service fleets: pre-trip and post-trip items under 49 CFR 396.11 and 396.13, a filled tree service truck report, and records.
A vehicle inspection checklist is the list of parts a driver checks before and after a day's driving, with a place to record each defect and sign. For a commercial motor vehicle, federal rules set the minimum list: service brakes, parking brake, steering, lights and reflectors, tires, horn, wipers, mirrors, coupling devices, wheels and rims, and emergency equipment.
The checklist is free and ungated, one of the free field service templates kept by FieldRanger, which makes field service software, including inspection management software, that runs inside HubSpot. It is written for service fleets: the pickups, vans and work trucks that carry technicians and equipment to jobs. The items follow 49 CFR 392.7, 396.11 and 396.13, with the service-fleet items the regulations leave to the company.
Vehicle inspection checklist items: pre-trip and post-trip
The checklist has three parts: the vehicle and trip details, the items, and the report. The first table identifies the vehicle and the driver.
| Field | What goes in it |
|---|---|
| Company | Carrier name, and the USDOT number where the vehicle displays one |
| Vehicle | Unit number, year, make, model and license plate |
| Trailer | Unit number and plate of any trailer towed |
| Inspection type | Pre-trip or post-trip |
| Date and time | When the inspection was done |
| Odometer | Reading at the start of the day, or at the end for a post-trip |
| Driver | Name of the driver doing the inspection |
| Periodic inspection | Date on the annual inspection decal or report carried on the vehicle |
The second table is the list. Each item is marked OK or Defect, with a note for every defect.
| Item | What the driver checks | Basis |
|---|---|---|
| Service brakes, including trailer brake connections | Pedal feel, air or hydraulic warning lights, hoses and the trailer brake plug | 49 CFR 392.7 and 396.11 |
| Parking brake | Holds the vehicle on the engaged setting | 49 CFR 392.7 and 396.11 |
| Steering mechanism | Free play, binding, leaks at the steering gear | 49 CFR 392.7 and 396.11 |
| Lighting devices and reflectors | Headlamps, turn signals, brake, tail, marker and clearance lamps on truck and trailer; reflectors clean and present | 49 CFR 392.7 and 396.11 |
| Tires | Tread at least 4/32 inch on steering axle tires and 2/32 inch on others; no exposed ply or belt, no flat, no audible leak | 49 CFR 392.7 and 396.11; tread depths in 393.75 |
| Horn | Sounds | 49 CFR 392.7 and 396.11 |
| Windshield wipers | Clear the glass | 49 CFR 392.7 and 396.11 |
| Rear-vision mirrors | Present, secure, not cracked | 49 CFR 392.7 and 396.11 |
| Coupling devices | Hitch or pintle locked, pin secured, safety chains crossed and attached, breakaway cable connected | 49 CFR 392.7 and 396.11 |
| Wheels and rims | No cracks, missing or loose lug nuts, or rust trails at the nuts | 49 CFR 392.7 and 396.11 |
| Emergency equipment | Fire extinguisher rated 5 B:C, or two rated 4 B:C, charged and mounted; three reflective warning triangles | 49 CFR 392.7 and 396.11; contents in 393.95 |
| Fluids and leaks | Engine oil, coolant and washer fluid; no puddle under the vehicle | Company item |
| Cargo and equipment | Ladders, racks, toolboxes and loose equipment secured; compartments latched | Company item |
| Cab | Seat belts, gauges, registration and insurance card | Company item |
The third part is the report: the defects found, the driver's signature, the carrier's certification that each defect was repaired or that repair is unnecessary, and the signature of the next driver who reviews it. A PDF printable vehicle inspection checklist carries the same three parts on paper.
Federal pre-trip and post-trip inspection rules
The federal rules apply to commercial motor vehicles. A vehicle used on a highway in interstate commerce is one when its gross vehicle weight rating, gross combination weight rating or actual weight is 10,001 pounds or more (49 CFR 390.5, via Cornell LII, checked November 2026). Interstate commerce includes a trip from a place in one state to a place in another.
The pre-trip inspection has two sources. A commercial motor vehicle may not be driven unless the driver is satisfied that the eleven listed parts and accessories are in good working order (49 CFR 392.7, via Cornell LII, checked November 2026). Before driving, the driver must also be satisfied that the vehicle is in safe operating condition, review the last driver vehicle inspection report when one was required, and sign it to acknowledge the review and the certification of any repairs (49 CFR 396.13, via Cornell LII, checked November 2026).
The post-trip inspection produces the driver vehicle inspection report. The driver prepares a written report at the completion of each day's work on each vehicle operated. It identifies the vehicle, lists any defect that would affect safe operation or result in mechanical breakdown, and is signed by the driver. No report is required when no defect is discovered by or reported to the driver. Before the vehicle runs again, the carrier repairs any defect likely to affect safe operation and certifies on the report that each defect was repaired or that repair is unnecessary. The report and the certifications are kept for three months. Among its exceptions, the section does not apply to a carrier operating only one commercial motor vehicle, and the report may be created and kept electronically under 49 CFR 390.32 (49 CFR 396.11, via Cornell LII, amended February 19, 2026, checked November 2026).
A separate annual rule covers the same vehicles. Each must pass a periodic inspection at least once in the preceding 12 months, with the report or a decal on the vehicle (49 CFR 396.17, via Cornell LII, checked November 2026). The header's periodic inspection row records that date.
Filled vehicle inspection example: tree service truck in Kansas City, Missouri
A tree service crew runs a chip truck towing a brush chipper from its yard in Kansas City, Missouri, to jobs on both sides of the state line. The truck's weight rating exceeds 10,001 pounds, and the day's route crosses into Kansas, so the federal rules apply. The company, the vehicle and the readings are illustrative.
| Field | Example entry |
|---|---|
| Company | Example Tree Care LLC · USDOT 0000000 (example) |
| Vehicle | Unit 7: 2021 medium-duty chip truck, GVWR 19,500 lb on the door-jamb label, plate EXM-0007 |
| Trailer | Unit C-3: 12-inch brush chipper, plate EXT-0003 |
| Inspection type | Pre-trip, then post-trip |
| Date and time | Pre-trip November 11, 2026, 6:50 AM; post-trip 4:40 PM |
| Odometer | 48,312 at the start; 48,401 at the end |
| Driver | Jamie Ortiz |
| Periodic inspection | Decal dated March 2026 on the truck and on the chipper |
| Item | Pre-trip, 6:50 AM | Post-trip, 4:40 PM |
|---|---|---|
| Service brakes and trailer brake connections | OK | OK |
| Parking brake | OK | OK |
| Steering mechanism | OK | OK |
| Lighting devices and reflectors | OK | Defect: chipper right-side marker lamp out |
| Tires | OK: steer tires 7/32 inch, drive tires 9/32 inch | OK |
| Horn | OK | OK |
| Windshield wipers | OK | OK |
| Rear-vision mirrors | OK | OK |
| Coupling devices | OK: pintle locked, pin clipped, chains crossed, breakaway cable on | OK |
| Wheels and rims | OK | OK |
| Emergency equipment | OK: 5 B:C extinguisher charged; three triangles | OK |
| Fluids and leaks | OK | OK |
| Cargo and equipment | OK: saws in the locked box; climbing gear stowed | OK |
| Cab | OK | OK |
| Field | Example entry |
|---|---|
| Defects found | Chipper unit C-3, right-side marker lamp inoperative |
| Driver signature | Jamie Ortiz, November 11, 2026, 4:45 PM |
| Repair certification | Lamp replaced by shop mechanic Lee Grant; certified repaired November 12, 2026, 6:30 AM |
| Next driver review | Jamie Ortiz, pre-trip November 12, 2026, 6:45 AM: report reviewed and signed |
The post-trip report exists because a defect was found; on a day with no defect, the rule asks for none. The pre-trip on November 12 begins with the review signature, which closes the loop the regulation describes: defect, repair, certification, review.
Vehicle inspection instructions: walk-around and defect report
- Fill in the header before starting, including the trailer and the odometer reading.
- Walk around the vehicle in one direction every time, so no item is skipped: front, driver side, rear, trailer, passenger side.
- Check each item in the list and mark it OK or Defect. Measure tread depth with a gauge rather than judging it by eye.
- Check the coupling and the trailer lights with the trailer connected, not before.
- Write each defect as the part, its position and the condition: "chipper right-side marker lamp out", not "light".
- After the last job, repeat the walk-around and complete the report: list every defect found or reported, then sign.
- Hand the report to the person who arranges repairs, who records the repair or the finding that none is needed, and signs.
- Before the next trip, read the last report, confirm the certification, and sign it as the next driver.
- File the report with the vehicle's records for at least three months.
- Before filing, check that every defect on the report has a matching certification and a next-driver signature.
Service vans under 10,001 pounds and job site inspections
A cargo van rated below 10,001 pounds, towing nothing, is outside the federal commercial motor vehicle definition, and the driver vehicle inspection report is not required of it by that rule. State rules may differ. The same checklist serves such a van as the company's safety and maintenance record; the federal basis column becomes the company's standard.
A job site safety inspection checklist is a different document. It records the hazards at a work site rather than the condition of a vehicle. For construction work, federal rules require each employer's accident prevention program to provide for frequent and regular inspections of the job sites, materials and equipment by competent persons the employer designates (29 CFR 1926.20, via Cornell LII, checked November 2026). An OSHA job site inspection checklist is the record of those inspections, and the job site safety checklist is the job site inspection checklist template for it.
Two neighbouring checklists share the item-result-defect format. A used vehicle inspection checklist assesses a vehicle before purchase, not before a shift. A solar panel maintenance checklist applies the same structure to a customer's equipment at a job.
Fleet management software and digital inspection reports
A paper report reaches the office when the driver hands it in, and a defect found at 4:40 PM can wait overnight on a seat. The repair certification and the next driver's signature then depend on the same sheet surviving the night.
FieldRanger puts digital pre-trip and post-trip inspection checklists on the technician's phone, in the mobile app built for technicians in the field. The office assigns vehicles to technicians and sees which are free, sees real-time GPS location for every vehicle on a live map, and tracks fuel use. Maintenance scheduling sends reminders for oil changes, inspections and repairs, and service records accumulate in each vehicle's maintenance history. The fleet management software page describes the vehicle records alongside the jobs they serve.
The mechanic's repair of a reported defect is entered in the vehicle's service records, and the audit log keeps a record of user actions and data changes.
Fill it in here, or download the spreadsheet
The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.
Frequently asked questions
What is on a vehicle inspection checklist?
The federal minimum for a commercial motor vehicle: service brakes and trailer brake connections, parking brake, steering mechanism, lighting devices and reflectors, tires, horn, windshield wipers, rear-vision mirrors, coupling devices, wheels and rims, and emergency equipment. Service fleets add fluids, cargo securement and cab items.
What is the difference between a pre-trip and a post-trip inspection?
A pre-trip inspection confirms the vehicle is safe to drive and reviews the last report. A post-trip inspection, on completion of the day's work, produces the written driver vehicle inspection report when a defect is found.
Is a driver vehicle inspection report required if no defects are found?
No. Under 49 CFR 396.11, no report is required when no defect or deficiency is discovered by or reported to the driver.
How long must vehicle inspection reports be kept?
Three months from the date the report was prepared, together with the repair certification and the next driver's review, under 49 CFR 396.11.
Can a vehicle inspection report be electronic?
Yes. 49 CFR 396.11 and 396.13 allow the report and the review to be created and kept electronically under 49 CFR 390.32.
What is an OSHA job site inspection checklist?
A record of the frequent and regular inspections of job sites, materials and equipment that 29 CFR 1926.20 requires a construction employer's safety program to provide for. It covers site hazards, not vehicles.
Unit 7 on the morning after
Unit 7 left the yard on November 12 with a new marker lamp, a certified repair and a signed review, and the November 11 report goes into the truck's file until February. The work orders those trips serve are in the free field service templates hub. Fleet records come with the per-technician plans listed on pricing, and Start free trial is open for 14 days with no card required.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo