Template

Pool Cleaning Checklist:Weekly Service Steps, CDC and Maricopa County Chemical Targets, VGB Act Drain Cover Checks, Arizona Gate Checks and a Filled Mesa Route Stop

Pool cleaning checklist: weekly service steps, CDC and Maricopa County chemical targets, VGB Act drain cover checks, Arizona gate rules and a filled Mesa stop.

Updated 11 min read

Download .xlsxExcel spreadsheet · 10 KB · Free, no sign-upFill it in online

A pool cleaning checklist is the record of one service visit: skim the surface, empty the baskets, brush, vacuum, read the filter pressure, test the water against its targets, add chemicals, inspect the drain covers and the gate, and note repairs. The filled example is a weekly stop at a home pool in Mesa, Arizona.

The checklist is one of the free field service templates kept by FieldRanger, the pool service software that runs inside HubSpot. The table below lists the checks, and the page offers them as a free .xlsx download with no sign-up. Licensing, chemical storage and route pricing for a new route are covered in the guide on how to start a pool cleaning business; this page is the visit itself.

Pool cleaning checklist items for a weekly visit

The .xlsx download lists the same checks in this order, with a result column. The gate comes first because the barrier is recorded as found. The water test comes after cleaning, once brushing and vacuuming have mixed the water.

Pool cleaning checklist items, in visit order, and what the technician records
StepItemWhat the technician records
1Gate on arrivalFound closed and latched, or found open, with a photo if open
2Water levelLevel against the skimmer opening; auto-fill working or not
3SurfaceLeaves and debris skimmed
4Skimmer basketsEmptied; weir door present and moving
5Pump basketEmptied; lid seal condition
6BrushingWalls, steps, benches and tile line brushed
7VacuumFloor vacuumed, or the automatic cleaner checked and its bag emptied
8Filter pressureGauge reading against the clean-filter reading written on the tank; cleaned or backwashed when the manufacturer's rise is reached
9Water testFree chlorine, pH, total alkalinity and cyanuric acid, with the test method
10Chemicals addedProduct, strength, amount and time of each addition
11EquipmentPump running; unions and valves dry; timer or automation schedule; heater status if fitted
12Drain coversLabel legible, cover intact with every screw, lifespan date not passed, flow rating noted
13ClarityMain drain clearly visible from the deck
14Gate on leavingSelf-closes from open and latches; latch height
15PhotosBefore and after, and any defect found
16Repairs foundProblem, recommendation and quote number
17Notes for the customerReadings, additions and anything the owner should do before the next visit

Steps 1, 12 and 14 are safety items and are recorded at every stop, including when nothing has changed. A record that reads "gate OK" every week for a year shows that the check was done; a blank shows nothing.

Chemical targets for home pools and community pools

Two public-health sources set the targets, and they apply to different pools. CDC's guidance for home pools and hot tubs states: "CDC recommends pH 7.0–7.8 and a chlorine concentration of at least 1 ppm in pools and at least 3 ppm in hot tubs." Where cyanuric acid or a stabilized chlorine product is used, the pool figure rises to at least 2 ppm (CDC, Home Pool and Hot Tub Water Treatment and Testing, May 10, 2024).

Public and semipublic pools in the county are governed by code. Maricopa County's Environmental Health Code sets free chlorine of "not less than 1.0 ppm or more than 5.0 ppm" at "a pH of 7.2 to 7.8", total alkalinity between 60 and 180 ppm, and cyanuric acid at "100 ppm or less" where stabilizer is used. Water must be clear enough that "the main drain outlet is clearly visible to an adult standing on the pool deck" (Maricopa County Environmental Health Code, Chapter VI, Section II, Rev. 08/19/2026).

Water targets the checklist records against, by type of pool (sources as cited above)
ParameterHome pool (CDC)Public or semipublic pool (Maricopa County code)
Free chlorine, no stabilizerAt least 1 ppm1.0 to 5.0 ppm
Free chlorine, with cyanuric acidAt least 2 ppm1.0 to 5.0 ppm
pH7.0 to 7.87.2 to 7.8
Total alkalinityNot set on the CDC page60 to 180 ppm
Cyanuric acidNot set on the CDC page100 ppm or less
BromineNot set on the CDC page2.0 to 4.0 ppm in pools
Hot tub or spa chlorineAt least 3 ppm, no cyanuric acid3.0 to 5.0 ppm in a hydrotherapy pool
TestingAt least twice per day, more with heavy useAt least once daily, with an operating log kept 12 months

The testing row sets the limits of a weekly visit. CDC's twice-daily testing and the county's daily log are the owner's or the operator's tasks between visits. The technician's reading is one sample a week. The checklist notes say so rather than presenting it as the pool's condition for the week.

Drain covers under the Virginia Graeme Baker Act

Suction entrapment at a drain is the hazard the drain cover row exists for. The Consumer Product Safety Commission states that the Virginia Graeme Baker Pool and Spa Safety Act "requires pool and spa drain covers to comply with the ASME/ANSI A112.19.8 performance standard or any successor standard", later ANSI/APSP/ICC-16. "As of December 19, 2008, public pools and spas must be equipped with anti-entrapment drain covers that comply with 16 C.F.R. part 1450", and a public pool or spa with a single drain that can be blocked needs a secondary device or system to prevent entrapment (CPSC, Pool and Spa Drain Covers, checked November 12, 2026).

CPSC's inspection checklist gives the four observations the row records. Its 2023 letter to public pool owners names hotels, motels and apartment complexes among public pools. Inspectors confirm a required label, an intact cover "with no loose or missing screws", a cover within the manufacturer-recommended lifespan, and a flow rating in gallons per minute at or above the pool's maximum flow. A second anti-entrapment system is required "when there is a single blockable main drain or drains on the same plane that are less than three feet apart". The letter also recommends replacing covers past the expiration date on the cover (CPSC, Pool and Spa Drain Cover Safety letter, April 18, 2023).

The federal requirement on CPSC's page is written for public pools and spas. A home pool's covers take the same minute to inspect, and the checklist records them the same way at every stop. A cracked or expired cover at a house is found by the same row that finds one at an apartment pool.

Barrier and gate checks under Arizona law

Arizona's pool barrier statute sets the measurements behind steps 1 and 14. A pool covered by A.R.S. 36-1681 is "entirely enclosed by at least a five foot wall, fence or other barrier" with no opening that passes "a spherical object four inches in diameter". Gates are "self-closing and self-latching with the latch located at least fifty-four inches above the underlying ground" and open outward, away from the pool. The barrier stands at least 20 inches from the water's edge (A.R.S. 36-1681, checked November 12, 2026).

The statute has stated exemptions. They include public and semipublic pools, pools and barriers built before the article took effect, and "a residence in which all residents are at least six years of age". A city or county with its own barrier ordinance that is at least as strict applies its ordinance instead. The checklist does not decide which rule governs a yard; it records what the technician observed: whether the gate closed and latched by itself, and the latch height.

Filled pool cleaning checklist: weekly stop at a Mesa, Arizona home pool

The stop is a Thursday visit to a plaster pool with a cartridge filter, two main drains and a household that includes a four-year-old. The business, customer, readings, products and amounts are samples; the targets come from the CDC page cited above.

Filled pool cleaning checklist, Thursday, November 12, 2026, 9:10 to 9:42 AM (sample stop and readings)
StepItemEntry
1Gate on arrivalClosed and latched
2Water level1 inch below mid-skimmer; auto-fill valve working
3SurfacePalm debris skimmed after Tuesday's wind
4Skimmer basketsEmptied; weir door moving
5Pump basketEmptied; lid seal flattened, holding for now
6BrushingWalls, steps and tile line brushed
7VacuumAutomatic cleaner running; bag emptied
8Filter pressure21 psi against 14 psi clean; cartridges hosed off; 15 psi after
9Water testFree chlorine 0.6 ppm; pH 7.9; total alkalinity 100 ppm; cyanuric acid 70 ppm; drop-test kit
10Chemicals added1.0 gal liquid chlorine, 12.5%, at 9:30; 12 fl oz muriatic acid at 9:32
11EquipmentPump running on its 8-hour schedule; unions dry; no heater
12Drain coversBoth labeled ANSI/APSP/ICC-16 2017 with flow rating printed; use-by date 2029; one loose screw on the shallow-side cover, tightened
13ClarityMain drain clearly visible
14Gate on leavingSelf-closed from fully open and latched; latch 56 inches above the ground
15PhotosFilter gauge before and after; drain covers; gate latch
16Repairs foundPump lid seal flattened; replacement quoted, Q-2026-1204
17Notes for the customerChlorine was low for a stabilized pool; test on Saturday and Monday and add chlorine if below 2 ppm

Two readings drove the additions. Cyanuric acid at 70 ppm puts this pool in CDC's stabilized row, so its free chlorine target is at least 2 ppm, and 0.6 ppm was below even the 1 ppm floor. A pH of 7.9 sat above CDC's 7.8 ceiling. The two products went in two minutes apart and at separate points, because CDC's safety guidance says: "Never mix chlorine products with acid; this could create toxic gases" (CDC, MMWR 68(19), May 17, 2019).

Pool cleaning checklist instructions, stop by stop

  1. Record the gate as found before opening it.
  2. Clean before testing: skim, empty both baskets, brush and vacuum, then let the pump run while the filter is checked.
  3. Read the filter gauge against the clean reading written on the tank, and clean or backwash at the manufacturer's rise.
  4. Draw the water sample at elbow depth away from the returns, test, and record each reading with the method used.
  5. Compare each reading with the target for that pool type, add chemicals one at a time, and record product, amount and time.
  6. Inspect each drain cover for the label, the screws, cracks and the use-by date, and tighten or report.
  7. Photograph the gauge, the covers and anything found, and write the repair recommendation with a quote number.
  8. Close the gate, confirm it latches by itself, measure the latch if it has been moved, and leave the customer note.
  9. Before driving off, confirm that steps 1, 12 and 14 have entries, that every reading outside its target has an addition or a note beside it, and that the quote number is recorded.

Pool estimate template and cleaning business checklists

Repairs found in step 16 leave this checklist as a quote. The pool estimate template prices them, line by line, for the owner to approve before the next visit. The guide on how to start a cleaning business covers registering and insuring the business that runs these visits. The guide on how to grow a pool service business covers a route larger than one technician's week.

Pool route visits on the work order in FieldRanger

The checklist works on paper for one route. In FieldRanger, recurring job templates hold each weekly stop, and FieldRanger builds each technician's route for the day automatically. The visit reaches the assigned technician's phone as a digital work order with the access instructions, and a custom checklist on the work order carries the seventeen steps. Before and after photos attach to the work order, time is logged against each job, and chemicals used are logged as materials against the job for job costing. The invoice is generated from the completed work order, payment can be taken through Stripe, and invoices and payments sync with QuickBooks. The work order software page shows the checklist on the work order.

Weekly service can be charged automatically to the customer's card on file. A weather feed is not built, so stops added after a dust storm are scheduled by the dispatcher.

Fill it in here, or download the spreadsheet

The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.

Frequently asked questions

What is on a pool cleaning checklist?

The gate as found, water level, skimming, skimmer and pump baskets, brushing, vacuuming, filter pressure, a water test for free chlorine, pH, total alkalinity and cyanuric acid, chemicals added, an equipment check, drain covers, water clarity, the gate on leaving, photos, repairs found and a note for the customer.

What chlorine and pH levels should a pool have?

CDC recommends pH 7.0 to 7.8 and free chlorine of at least 1 ppm in pools, at least 2 ppm in pools that use cyanuric acid, and at least 3 ppm in hot tubs. Maricopa County's code for public and semipublic pools sets 1.0 to 5.0 ppm free chlorine at pH 7.2 to 7.8.

How many times a day should pool water be tested?

CDC recommends testing chlorine and pH at least twice per day, and more when many people use the pool. Maricopa County requires public and semipublic pools to test at least once daily and keep the log for 12 months.

What does the Virginia Graeme Baker Act require for pool drains?

Since December 19, 2008, public pools and spas must have anti-entrapment drain covers that comply with 16 C.F.R. part 1450, and a pool with a single blockable main drain, or drains on the same plane less than three feet apart, needs a second anti-entrapment system.

What are Arizona's pool fence and gate requirements?

Under A.R.S. 36-1681, a covered pool is enclosed by a barrier at least five feet high with no opening that passes a four-inch sphere, and gates are self-closing and self-latching with the latch at least 54 inches above the ground, opening away from the pool. Cities with an equal or stricter ordinance apply their own.

Is there a free pool cleaning checklist PDF?

The download is a free .xlsx with no sign-up, not a PDF: a Template sheet with every check and a result column, and a Sample sheet with the filled stop. Excel or Google Sheets saves it as a PDF for printing.

The Mesa stop's reading on Saturday

The Thursday record leaves the owner one number to watch: free chlorine against a 2 ppm floor, set by the 70 ppm of stabilizer already in the water. The tightened screw, the 56-inch latch and quote Q-2026-1204 are the items the next technician reads before opening the gate. The estimate form for Q-2026-1204 is in the free field service templates. Running the same stop from a phone takes a plan from pricing; Start free trial covers two weekly visits in its 14 days, with no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo