Template
Pool Estimate Template:Pump, Filter and Heater Repair Lines, Weekly Service Price, the DOE Pool Pump Standard and North Carolina Tax in a Raleigh Example
Pool estimate template for pump, filter and heater repairs and weekly service, with the DOE pump efficiency rule and North Carolina tax in a Raleigh example.
A pool estimate template prices work before it starts: the pool and each piece of equipment by make and model, the readings taken, each repair as a priced line, the efficiency rating a replacement pump must meet, weekly service as its own recurring price, tax and acceptance. The example prices pump, filter and heater work in Raleigh, North Carolina.
The field list is one of the free field service templates published by FieldRanger, the pool service software that runs inside HubSpot. Two prices share the document and are accepted separately. A repair price is a one-time figure built on what the technician found at the equipment pad; a weekly service price is a standing rate charged per visit for a season.
Pool estimate template fields: equipment, readings, lines and service price
The table lists the template's fields, and the page offers them as a free .xlsx download with no sign-up. A Word, Google Docs or printed version follows it row for row.
| Field | What goes in it |
|---|---|
| Business details | Trading name, address, phone, email and the state sales tax account number |
| Estimate number | A number from one sequence, carried later onto the work order and the invoice |
| Estimate date and valid until | The issue date, and the last date the equipment prices hold |
| Customer and pool address | The person who accepts, and the pool's address and county |
| Pool | In-ground or above-ground, surface, dimensions, volume in gallons, and the sanitizer system |
| Equipment schedule | One row per item, each with make, model, size rating and year installed |
| Pump nameplate | The weighted energy factor (WEF) and total horsepower (THP) printed on the existing pump's plate, or "not shown" |
| Readings | Filter pressure dirty and clean, motor amps against the plate, heater error code |
| Findings | The cause of each fault, stated as a component and a reading |
| Repair and replacement lines | One line per task or part: description, quantity, unit, unit price and line total |
| Replacement pump rating | Model, the manufacturer's certified hydraulic horsepower and WEF, and the federal minimum for that hydraulic horsepower |
| Freeze protection setting | The temperature, run time and speed left in the pump controller at handover |
| Optional lines | Priced work the customer may accept or decline, kept out of the total |
| Exclusions | Work the estimate does not include, such as new wiring, gas piping or liner repair |
| Weekly service price | Price per visit, first and last visit dates, what each visit includes, and which chemicals are billed |
| Sales tax | The rule and rate applied to each line, labor included or not, for the pool's county |
| Totals and terms | Repair total and season total, each with its tax; what is due at acceptance and on completion; parts and labor warranty |
| Acceptance | Two signature blocks: one for the repair lines and one for the weekly service |
Two signature blocks keep the prices independent: a customer can accept the pump and decline the season.
Filled pool estimate: pump, filter and heater work in Raleigh, North Carolina
The pool is an in-ground vinyl liner pool behind a house in north Raleigh. The business, customer, equipment models and prices are sample entries. The pump standard and the tax rate come from the federal regulation and the North Carolina Department of Revenue sources cited in the two sections after the tables.
| Field | Sample entry |
|---|---|
| Business details | Example Pool Service LLC, 200 Example Avenue, Raleigh, NC 27603 · 919-555-0164 · sales tax account 000000000 (sample) |
| Estimate number | PL-2026-0214 |
| Estimate date and valid until | November 12, 2026 · valid until December 12, 2026 |
| Customer and pool address | Lena Whitaker · 919-555-0119 · lena@example.com · 18 Example Lane, Raleigh, NC 27615, Wake County |
| Pool | In-ground, vinyl liner, 16 x 32 ft, about 20,000 gallons, salt chlorine generator |
| Equipment schedule | Pump: single-speed, 1.5 hp, installed 2014 · Filter: cartridge, 300 sq ft, four elements · Heater: natural gas, 250,000 BTU input, installed 2019 · Mechanical time clock |
| Pump nameplate | WEF not shown; motor rated 1.5 hp, 8.6 amps |
| Readings | Motor 9.8 amps, bearing noise, seal dripping · Filter 24 psi after a hose-down against 12 psi clean in May · Heater ignition lockout |
| Findings | Pump bearings failing on a 12-year-old single-speed unit; two filter elements with torn pleats; heater flame sensor coated, burner firing on test |
| Replacement pump rating | Variable-speed self-priming pool filter pump, 1.65 THP (sample model); certified hydraulic horsepower 1.00 and WEF 8.4 (sample figures); federal minimum at 1.00 hhp is 6.59 |
| Freeze protection setting | On; 38°F, 30-minute run before recheck, 1,500 rpm on a 3,450 rpm maximum |
| Exclusions | New wiring or bonding work beyond reconnecting the pump at its existing disconnect; gas piping; liner; salt cell |
| Weekly service price | $55.00 a visit, May 3 to October 25, 2027, 26 visits: skim, brush, vacuum, baskets, test and dose; salt billed by the bag |
| Sales tax | 7.25% Wake County combined rate on every line, labor included |
| Totals and terms | Equipment lines due at acceptance, balance on completion; weekly service billed monthly; 90 days on labor (sample) |
| Acceptance | Repair block and weekly service block, each with printed name, signature and date |
| Line | Qty | Unit | Unit price | Line total |
|---|---|---|---|---|
| Diagnostic visit: pump, filter and heater tests | 1 | visit | $95.00 | $95.00 |
| Variable-speed pool pump, 1.65 THP (sample model) | 1 | each | $1,385.00 | $1,385.00 |
| Pump replacement: remove old pump, plumb unions, reconnect at existing disconnect, program speeds and freeze setting | 3.0 | hours | $110.00 | $330.00 |
| PVC fittings, unions and sealant | 1 | lot | $48.00 | $48.00 |
| Cartridge filter elements, 300 sq ft set of four | 1 | set | $296.00 | $296.00 |
| Filter teardown, element change and O-ring lubrication | 1.0 | hour | $110.00 | $110.00 |
| Heater flame sensor clean and ignition test | 1.0 | hour | $110.00 | $110.00 |
| Repair subtotal | $2,374.00 | |||
| Sales tax, 7.25% | $172.12 | |||
| Repair total | $2,546.12 | |||
| Option, not in the total: replace flame sensor if cleaning fails | 1 | each | $85.00 | $85.00 |
| Weekly service, 2027 season | 26 | visits | $55.00 | $1,430.00 |
| Sales tax on weekly service, 7.25% | $103.68 | |||
| Weekly service season total | $1,533.68 |
The labor lines in the repair total come to $645.00, and they carry $46.76 of the tax. In North Carolina, writing labor on its own line does not take it out of the taxable base, for the reason set out below.
DOE pool pump standard on the replacement pump line
A federal efficiency standard governs the pump on line two. Under 10 CFR 431.465(f), a self-priming pool filter pump manufactured from July 19, 2021 with hydraulic horsepower of at least 0.711 and under 2.5 must reach a weighted energy factor of at least −2.30 × ln(hhp) + 6.59, measured in thousand gallons per kilowatt-hour. Smaller self-priming pumps, non-self-priming pumps and pressure cleaner booster pumps each have their own formula (10 CFR 431.465, via Cornell LII, checked November 2026). The Department of Energy's product page states that pumps made or distributed in commerce must meet paragraph (f), measured under Appendix C to Subpart Y (DOE, dedicated-purpose pool pumps, updated December 4, 2024).
The formula turns the pump line into a check. At a certified 1.00 hydraulic horsepower the natural log is zero, so the minimum WEF is 6.59, and the sample model's 8.4 clears it; at 1.50 hhp the minimum is 5.66. "1.5 hp pump" names a motor size and says nothing about compliance, so the estimate copies the model's certified figures.
Under 10 CFR 431.466(b)(1), the permanent nameplate of a dedicated-purpose pool pump shows its WEF and its motor's total horsepower (10 CFR 431.466, via Cornell LII, checked November 2026). The old pump's plate shows no WEF, and the estimate records "not shown" instead of a guess.
The freeze protection field follows paragraph (h) of the same section. A pump distributed with freeze protection controls ships with the feature disabled, or with defaults of no more than 40°F, no more than one hour of run time before the temperature is rechecked, and no more than half of maximum speed. The settings are user-adjustable, so the field records what the technician left in the controller: 38°F, 30 minutes and 1,500 rpm, under half of the 3,450 rpm maximum.
A motor-only replacement falls under a separate rule, 10 CFR 431.485, which the pool service growth guide sets out with its dates.
North Carolina sales tax on pool repair and weekly service
The North Carolina Department of Revenue's chart of services to real property classifies pool work row by row. "Clean in-ground swimming pool walls or liner, vacuum in-ground pool to remove leaves or other debris" is taxable, as is "Repair, maintain, or replace the heater for in-ground swimming pool". Installing an in-ground pool, with its excavation, is a capital improvement. The chart has no row for an in-ground pool pump or filter. Its introduction states that services to real property are generally repair, maintenance and installation services, subject to tax unless a person substantiates otherwise (NCDOR, Services to Real Property Taxability Chart, checked November 2026).
The department's page on those services adds the rule for labor lines: installation charges are taxable even when the retailer states them separately (NCDOR, Repair, Maintenance, and Installation Services, checked November 2026). The example therefore taxes every line, labor and the diagnostic visit included.
The rate depends on the county. Wake County's combined rate is 7.25%: the 4.75% state rate, 2.00% local and 0.50% transit. Mecklenburg County's is 8.25% since its additional 1% local tax took effect on July 1, 2026 (NCDOR, Current Sales and Use Tax Rates, table effective July 1, 2026). The same repair lines at a Charlotte pool carry $195.86 of tax instead of $172.12.
Pool estimate instructions from the equipment pad to the signature
- Write one equipment schedule row per item on the pad, copying make, model and plate ratings.
- Take readings before cleaning, then clean and read again, so each finding rests on two numbers.
- Write each finding as a component and a reading, such as "9.8 amps against 8.6 on the plate".
- Price each repair as lines: parts by model, labor by hours, fittings as a lot.
- For a replacement pump, write the model's certified hydraulic horsepower and WEF beside the computed federal minimum, and the freeze setting to be left in the controller.
- Price weekly service in its own section: rate, first and last visit, and what each visit includes.
- Apply the county's rate under the state's rule to each line, and total the repair and the season separately.
- Before sending, confirm that the lines add to the subtotal, that the pump's WEF meets the minimum, and that the rate matches the pool's county.
Repair estimates, weekly service and the documents around them
The repair estimate states what a fault costs to fix, on one visit's readings; the weekly price states what a visit costs, and the pool cleaning checklist sets out what a visit consists of. A season sold under signed renewal and cancellation terms belongs in a service agreement template, and the general estimate template holds the fields every trade shares.
Licensing follows the line, not the document: some states license pump and heater work but not cleaning, as the pool cleaning business start-up guide sets out for Florida and California. North Carolina's licensing of equipment work is not covered here.
Estimating software for pool repairs and route service
A template prices the job and stops: the pump model, readings and season price are retyped into a calendar, a route and an invoice.
In FieldRanger, the estimate is built from the HubSpot deal or contact record without leaving HubSpot, or built in FieldRanger and kept tied to the HubSpot deal it belongs to, and it can go out for signature through PandaDoc. A won deal becomes a job with its context carried over. Recurring job templates hold the weekly visits, and FieldRanger builds each technician's route for the day automatically. The assigned technician clocks in and out with time logged against each job, the invoice is generated from the completed work order, and payment can be taken in the field through Stripe. Revenue reports show job revenue and margin by service type, repair against route. The estimating software page describes the estimate itself.
Weekly service can be charged automatically to the customer's card on file. FieldRanger has no weather feed; a route cancelled for a storm is moved on the drag-and-drop calendar.
Fill it in here, or download the spreadsheet
The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.
Frequently asked questions
What goes on a pool estimate?
The business and customer, the pool and an equipment schedule with make, model and ratings, the readings and findings, one priced line per repair or part, the replacement pump's certified rating against the federal minimum, exclusions, the weekly service price as a separate section, tax, payment terms, warranty and two signature blocks.
Does a replacement pool pump have to meet a federal efficiency standard?
Yes, for pumps manufactured from July 19, 2021. Under 10 CFR 431.465(f), a self-priming pool filter pump from 0.711 to under 2.5 hydraulic horsepower must reach a weighted energy factor of at least −2.30 × ln(hhp) + 6.59, which is 6.59 at 1.00 hhp.
Is pool service taxable in North Carolina?
The North Carolina Department of Revenue lists in-ground pool cleaning and vacuuming, and heater repair or replacement, as taxable services. Installation charges are taxable even when stated separately, at the combined state, local and transit rate for the county, 7.25% in Wake County.
Is there a free pool estimate template in PDF or Word?
The download is a free .xlsx with no sign-up, not a PDF or Word file: a Template sheet with every field and the line items, and a Sample sheet with the filled Raleigh estimate. Excel or Google Sheets saves it as a PDF.
Estimate PL-2026-0214 after acceptance
Once Lena Whitaker signs the repair block, the variable-speed pump and four elements are ordered against the equipment payment, and the 38°F freeze setting goes onto the work order beside the model's certified 8.4 WEF. A signed service block puts 26 Monday stops on the 2027 route from May 3. The work order and invoice that follow have their own pages in the free field service templates hub. FieldRanger plans are listed per technician on pricing; Start free trial gives 14 days without a card, and the first estimate can be the pool's next pump.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo