Guide

Can a General Contractor Do Electrical Work:California B License Scope, Florida's Subcontract Rule, Texas TDLR Licensing, Exemptions and a Three-State Kitchen Sample

Can a general contractor do electrical work: California B license scope, Florida's subcontract rule, Texas TDLR licensing, exemptions and a costed sample.

By Published

11 min read

Can a general contractor do electrical work: only where the state's licensing law allows it, and no national rule decides. California lets a B general building contractor wire a project that includes two or more unrelated trades. Florida requires a general contractor to subcontract all electrical work. Texas requires a state electrical license for anyone who performs it.

The question arrives in the middle of a remodel. A kitchen job is signed and the cabinets are ordered. The general contractor's carpenter, who has wired outlets before, offers to run the two new circuits and save the electrician's trip. In one state that is lawful self-performance under the general license. In another it is unlicensed electrical contracting, and a complaint, a failed permit inspection or an insurer's question about who did the work exposes it. FieldRanger makes electrical contractor software for electrical firms on HubSpot, including those that work as subcontractors to general contractors. This guide reads the licensing scope in three states from each board's own site, then covers California's certification rule, the exemptions Texas lists, and the subcontract that moves the electrical scope to a licensed firm. A three-state sample kitchen, a checklist and the job records close it.

Three terms recur. A general contractor here means the license that lets a firm contract for a whole building project; its name and scope differ by state. Self-performance means the general contractor's own employees do a trade's work rather than a subcontractor's. A specialty license covers one trade, such as California's C-10 electrical classification or Florida's EC certification.

General contractor licenses and electrical work in three states

Each state answers the question from a different starting point. California defines the general license by the number of trades in the contract. Florida defines it as unlimited and then carves the trades out. Texas licenses the electrical work itself and has no state general contractor license in its list of regulated occupations.

General contractor licenses and electrical work in California, Florida and Texas (board sites read November 13, 2026)
StateGeneral license and its stated scopeElectrical licenseElectrical work in a general contractor's remodel
CaliforniaB general building: a structure requiring at least two unrelated building trades (CSLB)C-10 electrical contractorThe B licensee may self-perform it where the contract requires two or more unrelated trades besides framing or carpentry
FloridaCertified or registered general contractor: services "unlimited as to the type of work" (CILB)EC certified or ER registered electrical contractor (ECLB)Subcontracted to a licensed electrical contractor unless the general contractor holds the electrical certificate or registration
TexasNo state general contractor license in TDLR's regulated industriesTDLR electrical contractor, with a master electrician of recordPerformed by TDLR-licensed electricians working for a licensed electrical contractor, unless an exemption applies

The table covers state law only. Cities and counties issue permits and, in Texas and Florida, can hold their own registrations, and those local rules sit outside this guide.

California: the B general building license and the C-10 classification

California's limit on a B contractor turns on the shape of the contract. Business and Professions Code section 7057 defines a general building contractor by work on a structure "requiring in its construction the use of at least two unrelated building trades or crafts". A B contractor may not take a prime contract for other trades unless one of three conditions holds. The contract requires at least two unrelated trades besides framing or carpentry; the contractor holds the specialty license; or it subcontracts the work to a licensed specialty contractor (CSLB, B general building contractor, checked November 13, 2026).

CSLB's Fast Facts sheet, updated April 2025, states the consequence plainly. A B contractor can "enter a prime or sub-contract for two or more separate and unrelated trades and self-perform the work", and framing and carpentry do not count toward the two (CSLB, Fast Facts: what jobs a B general building contractor can and cannot perform). A kitchen remodel with drywall, plumbing, tile and electrical is a multi-trade contract the B license covers. A contract to replace a panel and nothing else is a single-trade electrical contract, and the B contractor needs the C-10 or a C-10 subcontractor to take it as a prime.

The C-10 classification covers a contractor that "places, installs, erects or connects any electrical wires, fixtures, appliances, apparatus, raceways, conduits, solar photovoltaic cells or any part thereof" (CSLB, C-10 electrical contractor). The Fast Facts sheet also lists two trades a B contractor may not take without the specialty license or a licensed subcontractor, whatever the contract's shape: C-16 fire protection and C-57 well drilling.

Electrician certification for C-10 employees in California

California adds a worker rule on top of the license rule. The Division of Labor Standards Enforcement states that electricians who work for a contractor with a class C-10 license must be certified (DIR, who needs to be certified to work in California as an electrician, checked November 13, 2026). A general contractor that subcontracts the electrical scope to a C-10 firm is therefore buying certified labor along with the license.

The DIR page addresses C-10 contractors' electricians. It does not address the employees of a B contractor who self-perform wiring inside a multi-trade contract, and this guide does not infer a rule for them. CSLB's Fast Facts sheet directs scope questions to its classifications deputy at classifications@cslb.ca.gov. A B contractor that plans to self-perform electrical work puts its question to that address before the first job.

Florida: an unlimited general contractor license and the electrical subcontract rule

Florida's general license reads broadest and is narrower than it reads. The Construction Industry Licensing Board's site defines a general contractor as one "whose services are unlimited as to the type of work which he or she may do". Building and residential contractors are defined more narrowly, by building type and height (Florida DBPR, Construction Industry Licensing Board, checked November 13, 2026). Electrical contractors answer to a separate board. The Electrical Contractors' Licensing Board defines an EC electrical contractor as one with the experience and knowledge to "install, repair, alter, add to, or design electrical wiring, fixtures, appliances, apparatus, raceways, and conduit" (Florida DBPR, Electrical Contractors).

The statute both boards administer draws the line. Section 489.113(3) of the Florida Statutes states that a contractor "shall subcontract all electrical, mechanical, plumbing, roofing, sheet metal, swimming pool, and air-conditioning work, unless such contractor holds a state certificate or registration in the respective trade category" (Fla. Stat. 489.113, 2026). The word "unlimited" on the board's page describes the building work a general contractor may contract for, not the trades it may perform. Section 489.113(9)(a) lets a contractor act as prime where more than half of the work is within its license, and subcontract the rest to other licensed contractors.

A Florida general contractor that wants to wire its own jobs therefore needs the electrical certification or registration itself, in addition to the general certificate. Short of that, every circuit in its remodels belongs to an electrical subcontractor.

Texas: TDLR electrical licensing and no state general contractor license

Texas starts from the work. The Texas Department of Licensing and Regulation states that "anyone who performs electrical work in the state of Texas must be licensed". It defines electrical work as any labor or material used in installing, maintaining or extending an electrical wiring system and its equipment (TDLR, electricians FAQ, checked November 13, 2026). An electrical contractor license requires the business to employ a licensed master electrician, who may be the owner. A master electrician may be assigned to only one contractor unless he or she owns more than 50% of it (TDLR, electrical contractor license).

TDLR's list of regulated industries, read on November 13, 2026, includes electricians and air conditioning and refrigeration contractors and contains no general contractor license. Whatever local registration a Texas general contractor holds, TDLR's rule reaches the person doing the wiring: a general contractor that self-performs electrical work in Texas needs an electrical contractor license and licensed electricians like any other electrical firm. The licensing and the insurance minimum TDLR attaches to that license are set out in the guide to business insurance for electrical contractors.

Exemptions: homeowners, HVAC connections and maintenance work

Texas lists the work that needs no state electrical license, and three entries meet a general contractor's projects (TDLR, exemptions to electrician licensing, checked November 13, 2026):

  • Homeowners: a person performing electrical work on a dwelling the person owns and lives in, under section 1305.003(a)(6). The exemption belongs to the owner, not to a contractor the owner hires.
  • HVAC connections: licensed air conditioning and refrigeration contractors making the electrical connections for heating and air conditioning work, or a disconnect serving only that equipment, under section 1305.003(a)(11).
  • Maintenance work: a maintenance person who does not do electrical work for the public and does not install equipment in new construction, under section 1305.003(a)(8).

TDLR notes that municipal or regional rules may override these exemptions. The homeowner exemption does not extend to a general contractor working for the homeowner, and the HVAC exemption applies only to a licensed air conditioning contractor's own equipment connections.

Subcontracting the electrical scope: license check, contract and schedule

The subcontract moves the electrical work, and three checks keep it lawful. The license is looked up on the board's own search before the contract is signed: CSLB for the C-10, DBPR for the EC or ER, TDLR for the electrical contractor and its master electrician of record. The subcontract describes the electrical scope from the general contractor's drawings, so nothing in the kitchen is left between trades. The schedule gives the electrician rough-in after framing and before insulation and drywall, and trim-out after cabinets and counters.

The price follows the electrician's estimate. Take-off, per-device pricing and labor hours are set out in how to estimate residential electrical work, and the lines of an electrical quote, from labor units to permit fees, in the electrical estimate guide. A subcontractor that sends its price on the electrical estimate template gives the general contractor a document it can compare line by line with a second bid.

Sample kitchen remodel in Bakersfield, Gainesville and Waco

The same kitchen remodel is priced in three metros: four new 20-amp circuits, relocated outlets and under-cabinet lighting, taking 22 electrician hours. Wages are the BLS 2025 metro medians for electricians: $36.47 an hour in Bakersfield-Delano, $26.77 in Gainesville and $23.50 in Waco (O\*NET OnLine, local wages for 47-2111.00 in California, Florida and Texas, read November 13, 2026), loaded with the employer's 7.65% Social Security and Medicare (IRS Topic 751, updated November 9, 2026). Hours, materials and every multiplier are sample inputs.

Sample electrical scope in one kitchen remodel, by state route (wages sourced; hours, materials and markups are sample inputs)
LineBakersfield, CaliforniaGainesville, FloridaWaco, Texas
Who may wire the kitchenThe B contractor's own crew, or a C-10 subcontractorA licensed electrical subcontractor onlyA TDLR-licensed electrical contractor only
Loaded electrician wage$36.47 × 1.0765 = $39.26$26.77 × 1.0765 = $28.82$23.50 × 1.0765 = $25.30
Labor cost, 22 hours$863.72$634.04$556.60
Subcontract price: labor × 2.2 (sample) + $640 materials (sample)$2,540.18$2,034.89$1,864.52
Price to the owner with a 12% general contractor markup (sample)$2,845.00$2,279.08$2,088.26
Self-performed by the general contractor, cost + 25% (sample)$1,879.65Not permitted without the electrical certificateNot permitted without the electrical contractor license

The California column shows the only state route with a choice. Self-performance looks $965.35 cheaper to the owner. The cost line holds only wages, payroll tax and materials: it carries none of the idle time, tools, licensing questions or warranty exposure of employing electricians. In Florida and Texas the electrical line is a subcontract price whatever the general contractor prefers. The markup on that line, $244.19 in Gainesville and $223.74 in Waco, is the general contractor's only margin on the wiring.

General contractor electrical scope checklist

  1. Identify the state and the license held, and read the board's own statement of its scope before bidding.
  2. In California, confirm the contract requires two or more unrelated trades besides framing or carpentry before self-performing electrical work.
  3. In Florida, subcontract all electrical work unless the firm holds an EC certificate or ER registration.
  4. In Texas, subcontract all electrical work to a TDLR-licensed electrical contractor, or obtain that license and a master electrician of record.
  5. Confirm any exemption relied on applies to the general contractor, not only to the homeowner or another trade.
  6. Look up the electrical subcontractor's license on the board's search and keep the record with the subcontract.
  7. Write the electrical scope from the drawings, with rough-in and trim-out dates in the schedule.
  8. Carry the subcontract price into the owner's estimate with the markup stated as a separate figure.
  9. Verify: before rough-in inspection, match the license number on the permit to the subcontractor named in the contract.

Subcontracted electrical jobs in FieldRanger

FieldRanger runs on HubSpot, so a general contractor's project and an electrical subcontractor's work order can sit beside the same customer record. An estimate can be built from the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger and kept tied to the HubSpot deal. Estimates and agreements go out for signature through PandaDoc, and a won deal becomes a job with its context carried over. The drag-and-drop calendar assigns rough-in and trim-out to an electrician and reschedules them when the cabinets arrive late.

Skill-based assignment matches jobs to technicians by certification and expertise, so an electrical firm can send a C-10 job only to a certified electrician. Each day is its own job, so rough-in and trim-out are two jobs; multi-day jobs are not built. Electricians clock in and out with time logged against each job, the invoice is generated from the completed work order, and revenue reports show job revenue and margin by customer or service type. Progress billing and retainage are not built, so a general contractor's pay application with retainage is prepared outside FieldRanger. Plans are on pricing, and Start free trial runs 14 days with no card.

Frequently asked questions

Can a general contractor do electrical work?

It depends on the state. In California, a B general building contractor may self-perform electrical work within a contract that requires two or more unrelated trades besides framing or carpentry. Florida requires a general contractor to subcontract electrical work unless it holds the electrical certificate, and Texas requires a TDLR electrical license for anyone who performs it.

Can a general contractor do electrical work in Florida?

Not without an electrical certificate or registration. Section 489.113(3) of the Florida Statutes requires a contractor to subcontract all electrical work unless it holds a state certificate or registration in that trade.

Does Texas license general contractors?

TDLR's list of regulated industries includes electricians and air conditioning contractors but no general contractor license. Electrical work in Texas requires TDLR licensing whatever other registration a general contractor holds.

Can a B general contractor in California replace an electrical panel?

Not as a standalone prime contract. CSLB's Fast Facts sheet states that a B contractor may not take a prime contract for other trades unless it requires two or more unrelated trades, the contractor holds the specialty license, or it subcontracts to a licensed specialty contractor such as a C-10.

Does the Texas homeowner exemption let a contractor wire a client's house?

No. TDLR's exemption covers a person working on a dwelling that person owns and lives in. A general contractor hired by the homeowner needs licensed electricians working for a licensed electrical contractor.

The Gainesville kitchen pays its general contractor $244.19 on the wiring and nothing more, because a Florida general license described as unlimited still sends every circuit to an electrical subcontractor.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo