Guide

Concrete Business:Licensing, Insurance, Silica Rules, Slab Bidding and Specialty Services

Concrete business guide: licensing, insurance costs, OSHA silica rules, a priced garage slab bid, and lifting, coating and polishing as specialty services.

By Published Updated

12 min read

A concrete business pours, finishes or treats concrete for pay: slabs, driveways and foundations, or specialty work such as lifting, coating and polishing. Starting one takes a registered business, a contractor license where required, liability and auto insurance, forming and finishing equipment, a silica control plan, and a bid method that prices cubic yards, crew hours and overhead.

Concrete is an unforgiving trade to price and to run. A slab bid at a competitor's price per square foot misses an inch of thickness and a cubic yard and a half of concrete; a dry cut with a handheld saw breaks the federal silica rule; a $4,000 driveway poured without a license in California is unlicensed contracting. FieldRanger, which makes concrete contractor software inside HubSpot, publishes this guide for owners starting or running a concrete crew. It sets out the business models first, then licensing, insurance, equipment, silica rules and a priced slab bid, followed by the specialty businesses, buying and franchising, and lead generation; a launch checklist and the bidding software come last.

Four terms recur. Flatwork is horizontal concrete on grade: driveways, sidewalks, patios and garage slabs. A cubic yard is 27 cubic feet, the unit in which ready-mix plants sell concrete. Ready-mix is concrete batched at a plant and delivered in a mixer truck, as distinct from bagged concrete mixed on site. Respirable crystalline silica is the fine dust released when concrete is cut, ground or drilled, and the subject of OSHA's construction standard.

Concrete business models: flatwork, foundations and specialty services

A flatwork business sells residential driveways, patios, walkways and garage slabs, and commercial sidewalks and curbs. Each job is a few days of forming, placing and finishing, and the crew's productivity on the pour day decides the margin. A foundation business forms and pours footings and walls for builders, works to plans and inspections, and sells to general contractors on a schedule set by the builder.

Specialty concrete businesses sell a service on existing concrete rather than a new pour. Concrete lifting raises settled slabs; coating applies epoxy or polyaspartic systems to garage and commercial floors; polishing grinds and densifies slabs to a finished surface. Each is covered below, because each has its own equipment and its own exposure rules.

Two adjacent businesses sit outside contracting. A precast concrete business opportunity is a manufacturing operation: a plant, molds, curing space and delivery trucks, selling steps, vaults, barriers or panels. A concrete countertop business is shop fabrication with on-site installation, closer to cabinetry in its sales cycle; whether it is profitable depends on the shop's throughput per mold, and no public dataset measures it.

Contractor licensing for a concrete business

Registration comes first: a business structure registered with the state, an Employer Identification Number from the IRS at no charge (IRS), a business bank account and any local business license. Contractor licensing is set by the state, and the threshold is the number to check before the first bid.

California shows how a threshold works. From January 1, 2025, an unlicensed person may complete projects up to $1,000 in total price for labor, materials and all other items, only where no workers are hired and no building permit is needed; a project over $1,000, or one requiring workers or permits, requires a license in the appropriate classification (Contractors State License Board, December 30, 2024). The board lists penalties for unlicensed contracting of administrative fines up to $15,000, and it cautions that a down payment should not exceed 10 percent of the contract price. A slab priced like the sample below exceeds that threshold four times over, so a California concrete business is a licensed business from its first driveway.

Other states license concrete work through a state board, through local registration, or not at all for residential flatwork. The state contractor board is the source of record, and a builder's subcontract will ask for the license number before the first pour.

Concrete business insurance costs

Insurance is a fixed cost a new concrete business carries from its first day. Insureon publishes these medians for concrete contractors who bought policies through it (Insureon, concrete contractor insurance cost, updated July 27, 2026).

Insureon median premiums for concrete contractors, updated July 27, 2026
PolicyMonthlyAnnual
General liability$119$1,423
Workers' compensation$240$2,874
Commercial auto$413$4,957
Inland marine, tools and equipment$42$505
Business owner's policy, if bundled$140$1,684

The first four lines total $9,759 a year. Insureon's figures are medians for its own applicants, and a quote for a crew with a pump truck or a foundation book of work will differ. Coverage limits, additional insured endorsements for builders and the completed operations exposure of a slab that cracks a year later are covered in the guide to concrete business insurance.

Equipment for a concrete business

The equipment follows the model. Flatwork needs forms and stakes, a screed, bull float, hand and edging tools, a power trowel for slabs, a walk-behind saw for control joints, a plate compactor for the base, wheelbarrows or a buggy, and a truck and trailer to carry it. Foundations add wall forms and a laser level. A pump is rented by the pour until volume justifies owning one.

The cost to start depends on what the owner already owns and what can be rented, so this guide prices no equipment list. Insurance at the medians above, $9,759 for the four core policies, is the sourced fixed cost; the equipment budget is built from the owner's own quotes.

Silica exposure rules for cutting, grinding and polishing

OSHA's construction standard for respirable crystalline silica sets a permissible exposure limit of 50 micrograms per cubic meter as an 8-hour time-weighted average, with an action level of 25 (29 CFR 1926.1153, via Cornell LII, checked November 12, 2026). An employer can comply by following Table 1 of the standard, which pairs each task with its control.

Two Table 1 entries cover the cutting and grinding a small concrete crew does. A walk-behind saw is used with an integrated water delivery system that continuously feeds water to the blade; outdoors no respirator is required, and indoors or in an enclosed area the requirement is a respirator with an assigned protection factor of 10. A handheld grinder, for uses other than mortar removal, is used with integrated water delivery or with a shroud and dust collection system; outdoors no respirator is required, and indoors the requirement is none for four hours or less per shift and APF 10 above that.

The rule decides equipment and price. A coating or polishing business grinds indoors for whole shifts, so its rig needs dust collection and its crew needs respirators and fit testing, and those costs belong in the price per square foot from the first job.

Concrete bid for a garage slab

Bidding a concrete job starts with volume, not area. The job below is a 24-foot by 24-foot garage slab, 4 inches thick, poured by a crew of three in a 10-hour day including forming and finishing. The rates come from the sources above and from federal data; the concrete price, base materials, hours and job count are sample figures, and a ready-mix price comes from the local plant's quote.

The labor rate starts from the median wage of cement masons and concrete finishers, $57,020 a year in May 2025 (BLS Occupational Outlook Handbook, masonry workers, page modified August 27, 2026), or $27.41 an hour at 2,080 hours. Wages are 70.0% of total employer compensation cost in private industry (BLS Employer Costs for Employee Compensation, June 2026), so the loaded cost is $39.16 an hour. Trucks use the IRS business standard mileage rate of 76 cents a mile from July 1, 2026 (IRS standard mileage rates, updated July 28, 2026).

Sample garage slab bid, 576 square feet at 4 inches
LineCalculationAmount
Volume24 × 24 × (4 ÷ 12) ÷ 277.11 cubic yards
Concrete ordered7.5 cubic yards × $165 (sample plant quote)$1,237.50
Base, forms, reinforcement and vapor barrierSample cost$420.00
Crew labor3 finishers × 10 hours × $39.16$1,174.86
Trucks2 trucks × 30 miles × $0.76$45.60
Insurance share$9,759 ÷ 60 jobs a year (sample)$162.65
Full cost of the jobSum of the five cost lines$3,040.61
Bid at a 30% margin$3,040.61 ÷ 0.70$4,343.73
Bid per square foot$4,343.73 ÷ 576$7.54

The labor line uses the unrounded hourly cost. Materials are 55% of the cost and labor 39%, so the two errors that move the bid are thickness and crew hours. A 5-inch slab of the same area needs 8.89 cubic yards, 1.78 more, or $293.33 at the sample price, which a square-foot price taken from a 4-inch job never charges. The concrete estimate template lays out the same lines with every field named.

Concrete lifting and leveling business

A concrete lifting business raises settled slabs back to grade instead of replacing them: sidewalks, driveways, patios, pool decks and garage floors. Two methods are in use. Polyurethane foam lifting drills small holes, injects a two-part foam that expands beneath the slab and cures quickly; mudjacking, or slabjacking, pumps a cement-based slurry through larger holes. The foam rig is a trailer or truck with a proportioning pump, heated hoses and a generator; the mudjacking rig is a slurry pump and mixer.

Starting a concrete lifting business adds a sales question that flatwork does not have: the customer is comparing a lift with a replacement, so the quote states the price of both. The work is measured by the slab and the volume of material injected, and the cost build is the same as the slab bid above, with material drums in place of ready-mix.

Concrete coating and polishing businesses

A concrete coating business applies epoxy, polyaspartic or polyurea systems to garage, basement and commercial floors. The coating's bond depends on surface preparation, which is diamond grinding or shot blasting to open the surface, and on a moisture check before application. Grinding is a silica task, so the Table 1 controls above apply to every prep day.

A concrete polishing business grinds a slab through a sequence of progressively finer diamonds, applies a densifier and polishes to the specified sheen. Polishing is grinding for the whole job, indoors on many floors, and the equipment budget is a planetary grinder, a dust extractor sized to it, and respirators. Both businesses price per square foot from a measured production rate, as flatwork does.

Buying a concrete business or a franchise

To buy a concrete business is to buy its license, its builders and its equipment, and each needs checking. Where the license is held by a qualifying individual rather than the company, the license may not transfer with the sale. The builder relationships are worth what the backlog and the last two years of repeat work show. The equipment is worth its condition, not its list price. The guide to buying a home services business covers valuation and due diligence.

A concrete franchise business sells a brand, a system and supplier pricing for a fee and royalties. The FTC's Franchise Rule requires the franchisor to furnish its disclosure document at least 14 calendar days before the buyer signs a binding agreement or makes any payment (16 CFR 436.2, via Cornell LII, checked November 12, 2026).

Lead generation and social media for concrete contractors

Lead generation for concrete contractors splits by buyer. Homeowners find a flatwork or coating business through search and through the job site itself: a Google Business Profile set up as a service-area business, photographs of finished pours and floors, a yard sign during the job, and reviews requested after it. Builders and general contractors buy through relationships, bid invitations and the license and insurance certificates on file. The guide to home services marketing covers the profile, review and ad rules.

Social media for a concrete business works on the same evidence: the pour, the broom finish, the stamped pattern, the before and after of a lifted walk. Concrete business names and logos follow the state's name availability check and any assumed name filing, and a name that states the service, flatwork, lifting or coating, tells a search result what the business sells. Truck lettering and cards come next, and the guide to concrete business cards covers what goes on them.

Concrete business launch checklist

  1. Register the business, obtain an EIN, and file any local business license and assumed name.
  2. Confirm the state's contractor license threshold and obtain the license before the first bid above it.
  3. Buy general liability, workers' compensation, commercial auto and tools coverage.
  4. Equip one crew for the chosen model, renting what the first jobs do not justify buying.
  5. Write a silica control plan from Table 1: wet saws, shrouded grinders with dust collection, respirators where indoor work requires them.
  6. Build the bid from cubic yards, crew hours at a loaded rate, materials, trucks and an insurance share.
  7. Open a ready-mix account and get the plant's full fee schedule: minimum load, short-load, waiting time and delivery.
  8. Verify on the first pour: yards ordered against yards placed, and crew hours against the hours in the bid.

Bids, crew hours and job margin in FieldRanger

The garage slab bid assumed 30 crew hours, and only the job record shows whether the crew needed 30 or 36. FieldRanger keeps the bid and the record on the same HubSpot deal. An estimate is built from the HubSpot deal or contact record without leaving HubSpot, as the estimating in HubSpot page shows, or in FieldRanger and kept tied to the deal, and PandaDoc sends it for signature. A won deal becomes a job with its context carried over, and the dispatcher assigns jobs to technicians by dragging them on the calendar.

On the pour day, clock-ins and clock-outs log time against the job, and those hours are the comparison the last checklist step makes. The invoice is generated from the completed work order, payment can be taken in the field through Stripe, and invoices and payments sync with QuickBooks. Revenue reports show job revenue and margin by customer or service type, so a slab priced too low shows up against the flatwork line. Start free trial runs 14 days with no card, and pricing lists the plans.

Frequently asked questions

How to start a concrete business?

Register the business and obtain an EIN, obtain the state contractor license where the job value requires one, buy liability, workers' compensation, auto and tools coverage, equip one crew, write a silica control plan, and bid from cubic yards, loaded crew hours and overhead.

How to start concrete business operations with a small crew?

Start with residential flatwork, rent the pump and the larger tools, and price each job from the slab volume and the crew's hours. A three-person crew at the May 2025 median wage costs $39.16 an hour per finisher loaded, before materials, trucks and margin.

How to start a concrete leveling business?

Leveling and lifting are the same service: raising settled slabs back to grade. The business needs a foam or slurry rig, a truck or trailer, insurance and a license where the state requires one, and a quote that sets the lift against the price of replacement.

How to start a concrete lifting business?

Choose the method, polyurethane foam or mudjacking, buy or finance the rig, confirm licensing and insurance, and price by the slab and the material injected. A lifting franchise is an alternative, with the FTC's 14-day disclosure period before signing.

How to bid a concrete job?

Calculate the volume in cubic yards, order a little over it, price the concrete from the plant's quote, add base and forms, crew hours at a loaded rate, trucks and an insurance share, and divide by one minus the target margin. The sample 24-by-24 garage slab in this guide bid at $4,343.73, or $7.54 a square foot.

What is needed to start a concrete business?

A registered business, a state contractor license where required, general liability, workers' compensation and commercial auto insurance, forming and finishing tools, a wet saw and shrouded grinders for silica control, a truck and trailer, and a ready-mix account.

How much does it cost to start a concrete business?

Insurance at Insureon's July 2026 medians for concrete contractors comes to $9,759 a year for general liability, workers' compensation, commercial auto and tools coverage. Equipment is added from the owner's own quotes, and renting the pump and larger tools keeps the first-year figure down.

One inch of thickness on a two-car garage slab is 1.78 cubic yards of concrete: a cost that a bid written by volume charges for and a bid copied by the square foot gives away.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo