Industry
Concrete Contractor Software:FieldRanger for Concrete on HubSpot
Concrete contractor software on HubSpot: FieldRanger runs flatwork, foundation and decorative jobs from estimate to pour day, with crew hours and invoices.
Concrete contractor software runs a concrete company's jobs from estimate to pour day to invoice: technicians and equipment on the calendar, located hours on each job, batch tickets and photos on the work order. FieldRanger does this inside HubSpot, where the builder or homeowner, the estimate and the job history share one record.
Concrete is one of the construction trades in field service software by industry. The work divides into flatwork, foundations and decorative concrete, and each fills the calendar differently. Flatwork is a run of small pours for homeowners. Foundations follow a builder's schedule and the building inspector's. Decorative work puts more crew hours into less concrete. General contractors managing whole buildings are covered on general contractor software.
Flatwork, foundations and decorative concrete
Flatwork: driveways, patios, sidewalks and slabs
Flatwork is concrete placed flat on a prepared base: driveways, patios, sidewalks, garage and shop slabs. The customer is a homeowner or a property manager, and the sale is a site visit and an estimate. The job runs from demolition and grading through forms, base, reinforcement, the pour, finishing, saw-cut control joints and sealing. A rain forecast moves the pour without moving the rest.
Foundations: footings, walls and slabs on grade
Foundation work is sold to builders, and a house foundation is a sequence of jobs: footings, walls or stem walls, then the slab. Where the building department inspects before a pour, each inspection is a hold point the crew cannot pass early. FieldRanger holds each stage as its own job on the builder's account. Photos of the rebar and forms taken before each pour attach to the work order and record what the inspector saw.
Decorative: stamped, stained, exposed aggregate and polished
Decorative concrete prices labor more than yards. Stamped patterns, acid and integral stains, exposed aggregate and polished floors add finishing time per square foot and need finishers who have done the work before. Skill-based assignment sends a stamped patio to a finisher whose record shows stamping, and the before and after photos show the next customer what the crew has poured.
A foundation from builder's order to final invoice
The sequence below follows one house foundation through HubSpot and FieldRanger, and names the record each step changes.
- The builder sends plans and a start date. In HubSpot the builder is a company, the superintendent a contact, and the house a deal.
- The estimate is built from the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger, where it stays tied to the deal. Cubic yards, rebar weights and ordering allowances are covered on concrete estimating software.
- The builder signs through PandaDoc, the deal is won, and FieldRanger turns it into a job with the deal's notes carried over. The office adds the footing, wall and slab pours as further jobs on the same account.
- Each stage goes onto the drag-and-drop calendar against the builder's schedule. Pour dates, crew days and weather holds are covered on concrete scheduling software.
- On form day, each member of the crew assigned to the job clocks in with the location recorded, and forms, a laser level and a plate compactor are checked out to the job by QR code.
- Before the pour, the crew photographs the rebar and forms. On pour day, each batch ticket is photographed and attached to the work order, and the yards delivered are logged as materials against the job.
- Each completed stage's work order generates its invoice, the builder can pay through Stripe, and invoices and payments sync to QuickBooks. Billing by stage is covered on concrete contractor invoicing software.
- Job completions and notes reach the HubSpot timeline, and the deal record shows job status to the estimator who sold it.
Silica dust, rebar and the job checklist
Cutting, grinding and drilling concrete release respirable crystalline silica. OSHA's construction standard limits exposure to 50 micrograms per cubic meter of air as an 8-hour time-weighted average, and requires a written exposure control plan (29 CFR 1926.1153, checked November 2026).
Table 1 of that standard pairs each task with its controls. A walk-behind saw uses an integrated water delivery system that continuously feeds water to the blade. Outdoors no respirator is required; indoors or in an enclosed area the operator wears a respirator with an assigned protection factor (APF) of 10. A handheld power saw with water delivery used outdoors needs no respirator up to 4 hours a shift and an APF 10 respirator beyond 4 hours.
Rebar carries a second rule. All protruding reinforcing steel onto and into which employees could fall must be guarded to eliminate the hazard of impalement. No employee may work under a concrete bucket while it is raised or lowered into position (29 CFR 1926.701, checked November 2026).
FieldRanger turns these rules into checklist lines on the job: water feed checked, hours on the saw recorded against the 4-hour threshold, rebar caps in place. Skill-based assignment sends saw work to employees trained on the exposure control plan.
Forms, saws, trowels and asset tracking
Asset tracking software for concrete contractors follows equipment that moves between jobs: form panels and stakes, screeds, power trowels, saws, plate compactors, mixers and laser levels. In FieldRanger each is an equipment record. A QR scan checks it out to a job and back in. The availability calendar prevents two crews from booking the same trowel for one pour day, and usage history shows who had it last.
Equipment maintenance schedules blade changes and engine service, categories sort assets by type and location, and depreciation tracking follows each machine's value toward replacement. The trucks appear on a live GPS map, digital pre-trip inspection checklists record each truck's condition, and odometer logs feed expense reports and IRS mileage records.
Change orders on a concrete job
Concrete contractor change order software records a change in scope and the customer's agreement to pay for it: soft subgrade that needs more base, a thicker slab, an added walkway. In FieldRanger the change is written as a further estimate on the same HubSpot deal and sent for signature through PandaDoc. The photos of the condition found attach to the work order and sync to the customer's HubSpot record, where they sit beside the estimate they changed.
Concrete business management software in HubSpot
Concrete contractor management software, for a company that sells to builders and to homeowners, carries two kinds of customer on one CRM. Builders are HubSpot companies with superintendents as contacts and a deal for each house; homeowners are contacts with a deal for each driveway or patio. FieldRanger keeps contacts and companies in two-way sync, so the crew's notes and the estimator's emails describe the same customer. The HubSpot field service overview covers the sync.
Revenue reports show job revenue and margin by customer or service type, which sets flatwork, foundation and decorative work side by side on what each earns. A job status change can trigger a HubSpot workflow, such as a resealing reminder to the owner of a stamped patio. HubSpot's Sales Hub pricing lists Starter with up to 50 workflows, its triggers and actions restricted, and Professional with up to 300 (HubSpot, Sales Hub pricing, checked November 2026). Rain days that move several pours at once are handled on the board described under dispatch software.
Batch plants, takeoff tools and other concrete software
Concrete ordering software for a cement business is the batch-and-dispatch system a ready-mix producer uses to take orders, batch loads and send mixer trucks. It serves a different company. FieldRanger serves the contractor who places the order: the office calls the plant, and the yards delivered come back as batch tickets photographed on the job.
Takeoff software measures quantities from plans, and FieldRanger has none. A contractor who bids commercial work from drawings uses a takeoff tool beside FieldRanger, and enters the quantities in the estimate. Construction project management suites with RFIs, submittals and drawing sets serve the company managing the building, not the crew pouring its slab.
Concrete guides, templates and comparisons
The concrete business guide covers licensing, insurance, silica rules, slab bidding and specialty services. Concrete business insurance, the concrete leveling business and concrete business cards cover the rest of starting out. Marketing channels, costs and measurement are covered in concrete contractor marketing, and the cost models and contract terms for hiring outside help in the guide to choosing a contractor marketing agency.
For pricing a job, the concrete estimate template lists every field with a filled example. Owners thinking about an exit can read concrete business valuation multiples and sell a concrete business.
For choosing software: best concrete estimating software compares products on price, features and HubSpot fit.
Frequently asked questions
What is concrete contractor software?
Software that runs a concrete company's jobs: estimates, crew and pour scheduling, equipment, located hours, job photos and invoices. FieldRanger does this inside HubSpot, so the builder or homeowner, the estimate and every pour sit on the same records.
What is the best concrete business software?
The answer depends on the work. A contractor bidding commercial jobs from plans needs a takeoff tool first; a flatwork, foundation or decorative contractor that measures on site and sells through HubSpot is the case FieldRanger covers, with estimates on the HubSpot deal and jobs, hours and invoices tied to it.
Does concrete contractor software track equipment?
FieldRanger does. Forms, saws, trowels and compactors are equipment records checked in and out by QR code, with an availability calendar, maintenance schedules, usage history and depreciation tracking.
How do concrete contractors handle change orders in FieldRanger?
The change is written as a further estimate on the same HubSpot deal, signed through PandaDoc, with photos of the condition that caused it attached to the work order.
Can concrete contractor software order concrete from a batch plant?
Not FieldRanger. Batch-and-dispatch systems belong to ready-mix producers; FieldRanger records what arrived, with batch tickets photographed on the work order and delivered yards logged as materials.
What OSHA rules apply to cutting concrete?
OSHA's silica standard for construction, 29 CFR 1926.1153, limits respirable crystalline silica to 50 micrograms per cubic meter as an 8-hour average and lists controls for each tool in its Table 1, such as water fed to the blade of a walk-behind saw.
Every pour in FieldRanger leaves batch tickets, located hours and photos of the forms on the builder's or homeowner's HubSpot record, filed before the concrete has cured. Pricing a pour is covered on concrete estimating software, billing on concrete contractor invoicing software, and plans on pricing, where Start free trial opens 14 days without a card.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo