Guide
Electrical Handyman Prices:Tennessee's Inspection Rule and LLE License, Published Task Ranges, Wage Rates and a Lebanon Visit
Electrical handyman prices for the work Tennessee leaves unlicensed: the inspection rule, the LLE license, Fixr task ranges, wages and a Lebanon sample visit.
Electrical handyman prices cover the electrical tasks a handyman may legally do. Fixr's electrician ranges put an outlet replacement at $18 to $34, a switch at $33 to $61 and a light fixture at $93 to $173. In Tennessee's State Electrical Program areas, only minor repairs such as replacing lamps clearly fall outside the licensing and inspection rules.
A handyman's price list fails when it carries electrical lines the business may not do. A list that offers "outlet and switch replacement" in a Tennessee county served by the State Fire Marshal's inspectors is quoting work the rules never name as minor, and a "new outdoor outlet" line is work that needs a permit, an inspection and a licensed installer. This guide is one of the pricing and quoting guides from FieldRanger, which makes handyman software on HubSpot. It sets out Tennessee's licensing line from the state's own board and fire marshal pages, sorts common electrical tasks against it, and gives the published task ranges and the wage gap. A quoting method, a priced visit in Lebanon, Tennessee, a checklist and a FAQ follow.
Three terms carry the guide. The LLE, or Limited Licensed Electrician, is the Tennessee license for electrical work under $25,000 a project in areas the state inspects. The State Electrical Program is the State Fire Marshal's Office permit and inspection program, which covers every part of the state not on its exempt list. A certificate of approval is the inspector's sign-off on a finished installation.
Tennessee electrical licensing: the LLE, the $25,000 line and the State Electrical Program
The Tennessee Board for Licensing Contractors states that the LLE "is only required by electricians performing work in a municipality utilizing the Division of Fire Prevention for permits or inspections and covers work less than $25,000 per project" (Tennessee Board for Licensing Contractors, Limited Licensed Electrician, read November 13, 2026). The license goes to individuals who pass the LLE trade exam, administered through Prov, and the initial application fee is $50. The board page does not state the exam fee. The requirements sit in T.C.A. § 62-6-102(d) and § 68-102-150, and the board advises checking with the local government first, since some accept the LLE and others license locally.
The fire marshal's inspectors enforce the 2017 edition of the National Electrical Code, and about 100 contracted deputy electrical inspectors cover the program areas (Tennessee State Fire Marshal's Office, electrical permits, read November 13, 2026). Cities that run their own programs are listed separately, including Knoxville, Chattanooga and all of Hamilton County, Nashville and Davidson County, Murfreesboro, Franklin, Clarksville, Jackson, and Memphis with all of Shelby County (SFMO, exempt jurisdictions, read November 13, 2026). A handyman working inside one of those cities follows the city's own permit and license rules instead.
Inspection triggers under rule 0780-02-01-.04
The rule that sorts electrical handyman lines is the fire marshal's inspection rule (Tenn. Comp. R. & Regs. 0780-02-01-.04, read November 13, 2026). An electrical permit is required before installing any wiring that this rule requires to be inspected (SFMO, electrical permit FAQ, read November 13, 2026).
Inspections are required on, among other things:
- Complete new installations, and HVAC equipment.
- New services, re-connections or changes in services to existing installations.
- Additions to existing installations, such as pools, well pumps, motors, added rooms and outbuildings.
- Conductors or raceways installed in any structure, before they are concealed.
- Electrical signs and temporary services.
Inspections are not required on "minor repair work, such as replacement of lamps or connection of portable devices to suitable receptacles which have been permanently installed." The same rule bars the inspector from issuing a final certificate of approval on an installation performed by anyone not licensed under T.C.A. Title 62, Chapter 6, except as provided in rule 0780-02-01-.05(2) and for installers licensed under Title 69, Chapter 10. The FAQ adds that a residential owner may buy an individual-use permit for a single residence that is not for resale, lease or rent. Wiring installed within or on a building needs at least two inspections, and changing out or upgrading service equipment triggers a safety inspection.
The rule names lamps and plug-in devices as minor and names no device replacement either way. Replacing a receptacle, a switch or a light fixture on an existing box adds no conductor, so it is not on the inspection list, and it is not on the minor-repair list either. The fire marshal's FAQ directs the question of whether work must be done by an electrical contractor or an LLE to the Board for Licensing Contractors at (615) 741-8307, and notes that the board cannot give legal advice. Until the question is settled for the business, those lines belong with a licensed electrician.
Electrical handyman tasks sorted by the Tennessee rule
The prices below are Fixr's national ranges for an electrician doing each task (Fixr, cost to hire an electrician, updated January 31, 2025). They are not handyman prices, and the readings are of the rule text, not a board determination.
| Task | Reading under the rule | Fixr price range |
|---|---|---|
| Replace lamps, including LED retrofit bulbs | Minor repair, named in the rule: no inspection | Not listed |
| Plug a portable device, such as plug-in under-cabinet lights, into an existing receptacle | Minor repair, named in the rule: no inspection | Not listed |
| Replace a receptacle like for like | Not named either way; refer until settled | $18 to $34 |
| Replace a switch or dimmer | Not named either way; refer until settled | $33 to $61 |
| Replace a light fixture on an existing box | Not named either way; refer until settled | $93 to $173 |
| Install a ceiling fan | Not named either way where the box and circuit stay; new wiring falls under the conductor rule | $312 to $580 |
| Replace a circuit breaker | Not named either way; work inside the panel, refer | $52 to $97 |
| Add a receptacle or circuit | New conductors: inspection and permit; LLE or electrical contractor | Not listed |
| Replace an electrical panel | Change in service: inspection and permit; licensed work | $1,325 to $2,466 |
Two lines are clearly handyman work: the named minor repairs, at the handyman's rate. The last two lines are an electrician's job under the rule's own text, and the five unnamed lines between them stay with an electrician until the business has settled them. The handyman's list should send each one to an electrician by name.
Home improvement license counties and the $3,000 line
Electrical licensing is not the only Tennessee threshold a handyman meets. A Home Improvement license is required for residential remodeling projects from $3,000 to $24,999, but only in the counties that adopted the law: Bradley, Davidson, Hamilton, Haywood, Knox, Marion, Robertson, Rutherford and Shelby (Tennessee Board for Licensing Contractors, Home Improvement Contractor, read November 13, 2026). The license requires a $10,000 surety bond or equivalent, general liability and workers' compensation insurance, and a $250 initial application. The sample visit below is far under $3,000; the line matters when a visit grows into a bathroom remodel.
Electrician and handyman wages in the Nashville area
The wage gap sets the floor under each kind of line. In BLS 2025 wage data, electricians in the Nashville-Davidson-Murfreesboro-Franklin area earned a median $30.45 an hour, against $29.37 statewide (O*NET, electricians wages in Tennessee, read November 13, 2026). General maintenance and repair workers, the occupation closest to a handyman, earned a median $23.45 an hour in the same area and $22.71 statewide (O*NET, maintenance and repair workers wages in Tennessee, read November 13, 2026).
The electrician median is $7.00 an hour, or 29.9%, above the handyman median in the Nashville area. Fixr's billed electrician rates of $70 to $131 an hour and service calls of $176 to $327 sit well above both wages, because a billed rate carries payroll costs, the truck, insurance and unbilled time. A handyman who prices the named minor repairs at a handyman rate is pricing work that needs no license; one who prices a fixture swap at a handyman rate is competing with electricians on work the board has not cleared.
Quoting method for a mixed electrical visit
- List every task the customer names, and sort each against the table above: named minor repair, board question, or licensed work.
- Confirm the address is in the State Electrical Program and not inside an exempt city, on the fire marshal's list.
- Price the named minor repairs at the handyman rate: hours times rate, plus materials with any stated handling charge.
- Refer an unnamed task, such as a receptacle or switch replacement, unless the business has settled it with the board.
- Refer licensed work to a named LLE or electrical contractor, and show the referral as a line on the estimate with no price.
- For a handyman business that holds an LLE, price permitted work as its own estimate, with the rough-in and final inspection fees as pass-throughs.
- Verify: after the visit, the invoice shows only the tasks the estimate classed as handyman work, and the referred lines show the electrician's name.
Sample visit in Lebanon, Tennessee, priced at a sample $68 an hour
The sample is a hypothetical handyman visit in Lebanon, Wilson County, which is not on the fire marshal's exempt list and not one of the home improvement counties. The $68 hourly rate, the task times, the parts prices and the 15% handling charge are sample inputs. The inspection fees come from the fire marshal's fee rule: no more than $35 for a rough-in inspection and $35 for a final inspection on a service of 0 to 200 amperes (Tenn. Comp. R. & Regs. 0780-02-01-.21, read November 13, 2026).
| Line | Classification | Time (sample) | Parts (sample) | Price |
|---|---|---|---|---|
| Replace 8 lamps in a foyer fixture and recessed cans with LED lamps | Named minor repair | 0.75 hours | $36.00 | $51.00 labor + $41.40 parts = $92.40 |
| Mount and plug in an under-cabinet light kit at an existing receptacle | Named minor repair | 1.00 hour | $48.00 | $68.00 labor + $55.20 parts = $123.20 |
| Replace a hall dimmer switch | Not named in the rule; not settled with the board | Referred | Referred | $0.00, referred to a licensed electrician |
| Add an outdoor receptacle on a new circuit | New conductors: permit, rough-in and final inspection | Referred | Referred | $0.00, referred; inspection fees of up to $70.00 belong to the electrician's estimate |
| Total | 1.75 hours | $84.00 at cost | $215.60 |
The visit bills $215.60 for two tasks and passes on the two that touch the wiring. The outdoor receptacle is the larger job: it needs at least two inspections, and their fees are capped at $70.00 for a service of 200 amperes or less. A handyman business whose owner holds an LLE could take that line in Wilson County and bill it as permitted work. The dimmer stays referred until the business has settled the device-replacement question with the board. The referral lines belong on the handyman invoice template too, so the customer sees what the handyman declined and why.
The general hourly and task rates behind a handyman's own list are in handyman prices, and the same exercise for plumbing, in three other states, is in handyman plumbing prices.
Electrical task screening before a handyman quote
- Check the address against the fire marshal's exempt list; inside an exempt city, follow the city's rules.
- Check the county against the home improvement list when a job may reach $3,000.
- Price lamp replacement and plug-in devices as handyman work.
- Refer receptacle, switch, dimmer and fixture replacements until the business has settled them with the board.
- Refer any task that adds a conductor, a circuit or service equipment to an LLE or electrical contractor by name.
- Write the referral on the estimate and the invoice as a $0.00 line.
- Verify: once a month, compare invoiced electrical lines against the classification table, and remove any line that crossed it.
Electrical task lines, referrals and invoices in FieldRanger
An estimate is built from the HubSpot deal or contact record, or in FieldRanger and kept tied to its deal, writes the HubSpot deal's line items and amount, and can go out for signature through PandaDoc. A won deal becomes a job with its context carried over, assigned to the technician on the drag-and-drop calendar, and auto-routing builds that technician's route for the day. Clock-in and clock-out time is logged against each job, so the sample's 1.75 hours become measured hours. The invoice is generated from the completed work order, syncs with QuickBooks, and can be paid in the field through Stripe; revenue reports show job revenue and margin by service type, so lamp and plug-in lines can be priced from their own history. Skill-based assignment matches jobs to technicians by certification and expertise, so a permitted electrical job goes only to a technician recorded as holding an LLE. Plans are on the pricing page; Start free trial runs 14 days with no card.
Frequently asked questions
How much does a handyman charge for electrical work?
The handyman's hourly rate for the tasks the state leaves unlicensed. Fixr's January 2025 ranges, for electricians, put an outlet replacement at $18 to $34, a switch at $33 to $61 and a light fixture at $93 to $173; the Lebanon sample bills two lamp and plug-in tasks at $215.60.
Can a handyman do electrical work in Tennessee?
In State Electrical Program areas, the inspection rule names only minor repair, such as replacing lamps or plugging portable devices into installed receptacles. Work that adds conductors needs a permit, an inspection and an installer licensed under Title 62, Chapter 6, such as an LLE.
Can a handyman replace a light switch or outlet in Tennessee?
The fire marshal's rule does not name device replacement as minor repair or as inspected work. Its FAQ directs that question to the Board for Licensing Contractors at (615) 741-8307, which cannot give legal advice, so the line stays with a licensed electrician until the business has settled it.
What is a Limited Licensed Electrician in Tennessee?
A license for electrical work under $25,000 a project in areas that use the Division of Fire Prevention for permits or inspections. It goes to individuals who pass the LLE trade exam, and the initial application fee is $50.
How much is an electrical inspection in Tennessee?
The fire marshal's fee rule caps a final inspection at $35 for a service of 0 to 200 amperes, a rough-in inspection at $35 and a re-inspection at $35. Cities on the exempt list set their own fees.
Lebanon's visit shows where the line falls: two tasks at $215.60, one dimmer the rule never names, and one outdoor circuit handed to a licensed electrician with up to $70.00 of inspection fees attached. An LLE on the owner's wall would move that last line onto the handyman's own invoice.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo