Guide
How to Quote a Siding Job:Cost Build-Up, Labor Hours by Height and Openings, Builder Bids, Minnesota Contract and Insurance-Claim Rules and an Eagan Sample
How to quote a siding job: the cost build-up, labor hours by story and opening count, builder bids, Minnesota license, tax, lien and claim rules, and a sample.
How to quote a siding job comes down to a cost build-up: measured squares with a waste allowance, trim and wrap, tear-off and disposal, labor hours set by story height and opening count, overhead and margin. A flat price per square skips the labor step, and on a two-story house it prices the job close to cost.
A siding quote copied from the last job fails in predictable places. A per-square rate set on single-story ranches is applied to a two-story colonial, and the scaffolding days come out of the margin. A quote that adds replacement windows changes the license the company needs in Minnesota. A contract signed at the kitchen table without the federal cancellation notice can be cancelled long after the three-day window. This guide is one of the pricing and quoting guides from FieldRanger, the siding contractor software that runs inside HubSpot. It covers the cost build-up, a costed sample in Eagan, Minnesota, bids to builders, Minnesota's license, tax, lien-notice and insurance-claim rules, the federal three-day rule, the symptoms of an underpriced quote and a checklist.
Three terms carry the page. A square is 100 square feet of wall covered by siding. A quote is a fixed price offered to a homeowner for a defined scope; a bid is a price submitted in answer to a builder's or owner's invitation, judged against other bids on the same scope. Production rate is the number of squares a crew removes and installs in one day.
Siding quote build-up from measurement to price
The quote is built in a fixed order, because each line depends on the one before it. Measuring and the waste allowance are set out line by line in siding estimating software, and the field-by-field form is the siding estimate template; this section covers what turns those quantities into a price.
- Net squares. Wall area by elevation, less openings by the siding manufacturer's measuring method, divided by 100.
- Material order. Net squares plus the waste allowance, rounded up to whole squares, priced at the supplier's tax-paid cost, plus trim, starter, corners, wrap, flashing and fasteners.
- Tear-off and disposal. The dumpster or haul, and the landfill rate.
- Labor hours. Net squares divided by the production rate for this house, times crew size, times hours per day, priced at the loaded wage.
- Permit. The city's fee for an exterior re-side, where the city requires one.
- Overhead recovery. A percentage of direct cost, or an hourly rate on labor hours.
- Margin. Price equals cost divided by one minus the target margin.
Step 4 is the line a per-square price hides. Materials per square stay close to flat from house to house; labor per square does not, because a second story adds staging and a window adds cuts, J-channel and trim. The general method of each step, with overhead and margin arithmetic for any trade, is in how to quote a job.
Sample siding quote: a two-story colonial in Eagan, Minnesota
The sample prices two hypothetical tear-off and re-side jobs in Eagan, Minnesota, with insulated vinyl lap siding. The wage is published: ONET lists an annual median of $74,060 for carpenters in the Minneapolis-St. Paul-Bloomington area, from BLS 2025 wage data ([ONET OnLine, Minnesota wages for 47-2031.00 Carpenters](https://www.onetonline.org/link/localwages/47-2031.00?st=MN), checked November 13, 2026). That is $35.61 an hour at 2,080 hours, and $46.29 loaded with a 30% burden for payroll taxes, workers' compensation and insurance. The burden, the measurements, the unit prices, the production rates, the overhead and the margin are sample inputs.
| Line | One-story ranch | Two-story colonial |
|---|---|---|
| Net squares (sample) | 18 | 28 |
| Squares ordered with a 10% waste allowance | 20 | 31 |
| Siding at $260 a square, tax paid (sample) | $5,200 | $8,060 |
| Trim, starter, corners and J-channel (sample) | $900 | $1,450 |
| House wrap and tape (sample) | $340 | $520 |
| Fasteners, flashing and sealant (sample) | $240 | $380 |
| Dumpster and disposal (sample) | $550 | $650 |
| Permit (sample) | $250 | $250 |
| Production rate, three installers (sample) | 6 squares a day | 4 squares a day |
| Crew-days and labor hours | 3 days, 72 hours | 7 days, 168 hours |
| Labor at $46.29 an hour | $3,333 | $7,777 |
| Direct cost | $10,813 | $19,087 |
| Overhead at 12% of direct cost (sample) | $1,298 | $2,290 |
| Full cost | $12,111 | $21,377 |
| Price at a 15% margin | $14,250 | $25,150 |
| Price per net square | $792 | $898 |
The ranch takes 4.0 labor hours a square and the colonial 6.0, while siding material costs the same $260 a square on both. A company that sets $792 a square from its ranch jobs quotes the colonial at $22,176. That price sits $799 above full cost, against $3,773 at the built-up price of $25,150, so the per-square shortcut removes almost four-fifths of the profit on the larger house. The error grows with height and openings, which is the reason the production rate is set per house rather than per company.
Siding bids for builders and general contractors
A bid to a builder differs from a homeowner quote in three places. The builder sets the scope in plans and a bid form, so the bid prices the drawings rather than a site measurement; the price is stated per unit or as a lump sum against named exclusions; and the siding company is a subcontractor, with the lien rights and notices that role carries.
How to bid a siding job for a builder:
- Take quantities from the elevations and confirm the measuring method the bid form expects.
- Price per square for siding and per linear foot for trim, so a change in the plans reprices itself.
- List exclusions in writing: house wrap by others, window flashing by the window installer, dumpster by the builder.
- State how long the price holds and the material escalation terms after that date.
- Diary the 45-day lien notice described below.
Public bids add bid forms, deposits and prevailing wage, covered in how to bid a job. The production rate still decides the labor line: a bid to a builder is new construction on open studs with no tear-off, so its rate differs from a re-side on the same plan.
Minnesota license scope: siding, trim, gutters and windows
Minnesota groups residential work into eight special skills. Siding sits under exterior finishing, with soffit, fascia and trim, exterior plaster and stucco, painting, and gutters and downspouts; doors, windows and skylights sit under carpentry (Minn. Stat. 326B.802, checked November 13, 2026). A residential remodeler contracts to provide two or more special skills, and specialty contractors who provide only one special skill are exempt from the license requirement (Minn. Stat. 326B.805).
The quote decides which side of that line the company is on. Siding, trim and new gutters are one special skill. The same quote with six replacement windows is two, and the company quoting it is a residential remodeler that needs the license. The license number belongs on the quote before window lines are added to it.
Sales tax on materials in a Minnesota siding quote
Minnesota treats a siding contractor as the consumer of its materials. The Department of Revenue instructs contractors to pay sales or use tax on all materials, supplies and equipment used to complete a construction contract, to pass that tax on as part of the materials cost, not to itemize sales tax separately on the invoice, and not to charge sales tax on construction contracts (Minnesota Department of Revenue, General Contractors and Subcontractors, last updated June 18, 2024).
The rule fixes how the sample is priced: the $260 a square is the supplier's price with tax paid, and the quote carries no tax line. A quote built in another state's habit, with untaxed material costs and tax added at the bottom, both understates cost and charges the homeowner a tax Minnesota tells the contractor not to charge.
Lien notice in the homeowner contract
A siding contractor who buys from a supplier or uses a subcontractor must put Minnesota's lien notice in the written contract with the owner, in at least 10-point bold type, and give the owner a copy. A contractor who fails to provide the notice does not have the lien and remedy the chapter provides (Minn. Stat. 514.011, checked November 13, 2026).
On a builder job the siding company is the subcontractor. Section 514.011, subdivision 2, requires a party not under direct contract with the owner to give the owner written notice no later than 45 days after first furnishing labor, skill or materials, as a prerequisite to any lien claim. The bid's job record carries the first delivery date for that reason.
Three-day cancellation for a siding contract signed at the house
The FTC's Cooling-Off Rule reaches a siding contract signed at the customer's home. A door-to-door sale includes a sale made at the buyer's residence "in response to or following an invitation by the buyer", with a purchase price of $25 or more (16 CFR 429.0, checked November 13, 2026). A homeowner who called for a quote and signs at the kitchen table is inside that definition unless an exclusion applies.
The seller must give a completed copy of the contract stating that the buyer may cancel "at any time prior to midnight of the third business day after the date of this transaction", with a notice of cancellation form, and must refund all payments within 10 business days of a valid cancellation (16 CFR 429.1). A business day is any calendar day except Sunday and federal holidays, so a contract signed on a Friday runs to midnight on Tuesday. Material ordered before that midnight is ordered at the company's risk.
Insurance claim siding quotes under Minnesota law
Hail and wind claims bring a second set of rules. A residential contractor providing work paid from insurance proceeds may not promise to pay all or part of the deductible, or offer compensation for an inspection, a claim or a referral. It must give a good faith estimate of the itemized and detailed cost of services and materials with any agreement authorizing repairs, and may not interpret policy provisions or adjust the claim without a public adjuster license. The contractor must provide written notification of the section's requirements with its initial estimate, and an insurer need not consider the estimate of a contractor who violates the section (Minn. Stat. 325E.66, checked November 13, 2026).
The section defines a residential contractor as a residential roofer, building contractor or remodeler, so it follows the special-skill count above; whether a siding-only specialty contractor falls inside it is a question for the Department of Labor and Industry, which enforces the section. The 72-hour right to cancel after a claim denial in Minn. Stat. 326B.811 applies to contractors providing roofing services. A combined roof-and-siding claim quote carries that notice; a siding-only quote does not.
Underpriced siding quotes: symptom, cause and correction
| Symptom | Cause | Correction |
|---|---|---|
| Two-story jobs finish two or more days over plan | One production rate used for every house | Set the rate per house from stories and openings |
| Material cost on the job exceeds the quote | Untaxed supplier prices in the build-up | Price materials at tax-paid cost |
| A trim and corner shortfall at the end of the install | Trim priced as a percentage of squares | Measure trim in linear feet per elevation |
| Hidden sheathing damage absorbed at tear-off | No sheathing allowance and unit price on the quote | Quote a stated number of sheets and a price per extra sheet |
| A signed contract cancelled after material arrived | Ordered before the third business day passed | Order after the cancellation window closes |
| A lien claim refused on a builder job | No notice within 45 days of first delivery | Diary the notice date at first delivery |
Older houses add one more line. A house built before 1978 needs lead-safe work practices and an EPA-certified firm for siding removal, a line set out in siding contractor software.
Siding quote checklist
- Net squares by elevation, with the manufacturer's measuring method named.
- Material order with the waste allowance, priced at tax-paid cost.
- Trim, corners and starter in linear feet; wrap and flashing at each opening.
- Production rate set for this house: stories, openings, tear-off layers.
- Labor hours priced at a loaded wage, with the burden stated.
- Sheathing allowance and the unit price beyond it.
- Disposal, permit, overhead and margin as separate lines.
- License number on the quote; window lines checked against the special-skill count.
- Lien notice in the contract; for a builder bid, the 45-day subcontractor notice diaried.
- Three-day cancellation statement and form for a contract signed at the house.
- For an insurance claim: itemized estimate, the 325E.66 written notification, no deductible offer.
- Verify: rebuild the price from the lines and confirm it divided by net squares falls within the company's range for houses of the same height.
Siding quotes, signatures and install jobs in FieldRanger
FieldRanger runs field service inside HubSpot. An estimate can be built from the HubSpot deal or contact record without leaving HubSpot, or built in FieldRanger and kept tied to the HubSpot deal it belongs to (estimating software). Estimates and agreements go out for signature through PandaDoc, so the cancellation statement and lien notice travel in the signed document. A won HubSpot deal becomes a job with its context carried over, and photos taken on the job sync to the customer's HubSpot record, which keeps the tear-off photos of damaged sheathing beside the change order.
Each day is its own job in FieldRanger: multi-day jobs are not built, so a seven-day re-side is seven jobs. Progress billing is not built either. Materials used on each job are logged for job costing, and revenue reports show job revenue and margin by customer or service type, which is where the planned production rate meets the actual one. Plans are on pricing, and Start free trial runs 14 days with no card.
Frequently asked questions
How to quote a siding job?
Measure net squares by elevation, add the waste allowance, price materials at tax-paid cost, set labor hours from a production rate for that house, then add disposal, permit, overhead and margin. A flat price per square leaves out the labor difference between a ranch and a two-story house.
How to bid a siding job?
Take quantities from the builder's elevations, price siding per square and trim per linear foot, list exclusions such as house wrap by others, and state how long the price holds. In Minnesota a subcontractor gives the owner its lien notice within 45 days of first furnishing labor or materials.
How much to charge per square for siding?
A per-square figure is the output of a build-up, not an input. In the Eagan sample the same company arrives at $792 a square on a ranch and $898 on a two-story colonial, with identical material prices.
Does a Minnesota siding quote include sales tax?
Not as a line. The Department of Revenue tells contractors to pay tax on materials at purchase, pass it on in the materials cost, and not charge sales tax on construction contracts.
Can a siding contractor pay the insurance deductible in Minnesota?
No. Minn. Stat. 325E.66 bars a residential contractor from promising to pay all or part of the deductible as an inducement on work paid from insurance proceeds.
The production-rate line separates a siding company that makes its margin on two-story houses from one that loses it there: the Eagan colonial carries $3,773 of profit at its own rate and $799 at the ranch's. Builder bids, repairs and other trades' quotes are in the pricing and quoting guides.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo