Guide
Plumbing Business Loans:SBA Fixed and Variable Rate Maximums, 7(a) Small and Microloan Limits, Acquisition, Van and Jetter Financing, and Lender Documents
Plumbing business loans: SBA fixed and variable rate caps for November 2026, 7(a) and microloan limits, acquisition and jetter financing, and lender documents.
Plumbing business loans come from three main sources. SBA 7(a) loans, made by banks and credit unions up to $5 million, finance equipment, vans, working capital or the purchase of a company; SBA microloans of up to $50,000 come from nonprofit intermediaries; conventional loans are secured by the van or jetter they buy. In November 2026 the SBA's maximum fixed 7(a) rate ran from 12% to 15%, by loan size.
A plumbing loan is priced in three places that the payment quote does not show. The choice between a fixed and a variable rate changes the ceiling by up to two points at some loan sizes and by nothing at others. A request of $151,000 carries a lower guaranty share and a higher fee rate than one of $150,000. Two 7(a) loans approved for one borrower within 90 days of each other are treated as one when the fee is calculated. FieldRanger makes plumbing software that runs inside HubSpot, and this guide is written for the owner or office manager assembling a loan request. It sets out the loan sources, then the November 2026 rate maximums, guaranty shares and fees, microloans, financing outside the SBA, and loans to buy a plumbing company. The documents a lender reads, a sample with two loans, a checklist and the records behind the request close it.
Four terms carry the numbers. The prime rate is the bank prime loan rate the Federal Reserve publishes, to which SBA rate maximums are pegged. A fixed rate stays the same for the life of the loan; a variable rate moves with its base rate. The guaranteed portion is the share of a 7(a) loan the SBA repays the lender if the borrower defaults. The upfront fee is a one-time charge set as a percentage of that guaranteed portion.
Plumbing business loan sources and what each finances
Each program fits a different purchase, and the size of the request decides which 7(a) program applies. The SBA's eligibility rules apply to all of them. The business operates for profit in the U.S. and is small under SBA size standards; it cannot obtain the credit on reasonable terms from non-government sources, and it is creditworthy with a reasonable ability to repay (SBA, 7(a) loans, checked November 13, 2026). The size standard for NAICS 238220, plumbing, heating and air-conditioning contractors, is $19.0 million in annual receipts (13 CFR 121.201, via Cornell LII).
| Source | Maximum | Fits a plumbing company's | Limits |
|---|---|---|---|
| 7(a) Small | $350,000 | Vans, jetters, cameras, working capital, the purchase of a smaller company | Term loans only; SBA guaranty 85% up to $150,000 and 75% above |
| Standard 7(a) | $350,001 to $5 million | A larger acquisition, a building, refinancing | SBA guaranty 75% |
| SBA Express | $500,000 | A revolving line of credit for up to 10 years | SBA guaranty 50% |
| SBA microloan | $50,000 | Tools, a drain camera, a jetter, inventory, working capital | No debt refinancing or real estate |
| Conventional vehicle or equipment loan | The lender's limit | A van or a trailer jetter, secured by the item | The lender's own rate, term and down payment |
Sources: SBA, types of 7(a) loans; SBA, microloans. The guide to HVAC business loans covers the 504 program, seasonal CAPLines and the tax treatment of financed equipment, which apply to plumbing companies in the same way.
SBA fixed and variable rate maximums for November 2026
The lender sets the rate, under an SBA ceiling that depends on whether the rate is fixed or variable. The Federal Reserve's H.15 release reported a bank prime loan rate of 7.00% on November 10, 2026 (Federal Reserve, H.15 selected interest rates, released November 12, 2026). Variable maximums are a spread over the base rate: 6.5 points for loans of $50,000 or less, 6.0 points to $250,000, 4.5 points to $350,000 and 3.0 points above (SBA, 7(a) terms, conditions and eligibility, checked November 13, 2026). Fixed maximums are published each month on the SBA's FTA wiki. The November 2026 table uses a fixed base rate of 7% and sets four tiers (SBA FTA wiki, New Maximum Allowable Fixed Rate for 7(a) Loans, posted November 3, 2026).
| Loan amount | Maximum variable rate | Maximum fixed rate | Fixed premium over variable |
|---|---|---|---|
| $25,000 or less | 13.50% | 15.00% | 1.50 points |
| $25,001 to $50,000 | 13.50% | 14.00% | 0.50 points |
| $50,001 to $250,000 | 13.00% | 13.00% | None |
| $250,001 to $350,000 | 11.50% | 12.00% | 0.50 points |
| Over $350,000 | 10.00% | 12.00% | 2.00 points |
The two schedules use different break points, which is the finding a plumbing owner can act on. Between $50,001 and $250,000, the fixed ceiling equals the variable one, so a lender quoting at the cap charges nothing extra to remove the rate risk. Above $350,000 the fixed ceiling sits two points higher, and the choice is a real trade. The same FTA table shows the fixed maximums at 11.75% to 14.75% from January through September 2026, when the fixed base rate was 6.75%. The fixed caps move with prime month by month, even though each loan's fixed rate does not.
Guaranty share and FY 2027 upfront fees by loan size
The guaranty share and the upfront fee both step up at $150,000. A 7(a) loan of $150,000 or less carries an 85% guaranty, and a larger 7(a) Small loan 75% (SBA types page, above). For loans with a maturity over 12 months approved from October 1, 2026, the upfront fee is 2% of the guaranteed portion for loans of $150,000 or less and 3% from $150,001 to $700,000. Larger loans pay 3.5% up to $1 million plus 3.75% above that, and a loan of 12 months or less pays 0.25% (SBA, 7(a) fees effective October 1, 2026 for fiscal year 2027, last updated September 3, 2026).
Three exceptions in the same notice matter to a plumbing company. Loans of $700,000 or less to businesses located in a rural area pay no upfront fee. SBA Express loans to businesses owned and controlled by a veteran or a veteran's spouse pay no upfront fee. Two or more 7(a) loans approved for one applicant within 90 days of each other are treated as one loan for the guaranty percentage and the fee. The lender also pays an annual service fee of 0.55% of the outstanding guaranteed balance, which the notice states it may not pass on to the borrower.
SBA microloans for drain cameras and jetters
A microloan fits a single purchase within its $50,000 limit: a drain camera, a cart jetter, a stock of water heaters, a down payment on a used van. The SBA lists working capital, inventory, supplies, furniture, fixtures, machinery and equipment as uses, and reports an average loan of about $13,000. Rates generally run between 8% and 13%, depending on the intermediary (SBA, microloans, checked November 13, 2026). The maximum term on that page is seven years. Proceeds cannot pay existing debts or buy real estate.
The intermediary, a nonprofit lender approved by the SBA, makes the credit decision and sets every term. A plumbing company compares a microloan quote with a 7(a) quote on the same purchase: at $45,000, the 7(a) ceiling is 13.50% variable or 14.00% fixed, and the microloan range runs from 8% to 13%.
Van, jetter and building financing outside a 7(a) loan
A conventional vehicle or equipment loan is secured by the van or machine it buys and carries no SBA guaranty or fee. The bank, credit union or dealer sets the rate, the term and the down payment, and its quote is compared with the 7(a) ceilings above on the same amount and term. A lease is the other route for a van or a trailer jetter: the company pays for use rather than ownership, and the lease terms state the buyout at the end.
Within a 7(a) loan, equipment maturity is ten years or less unless the equipment's useful life is longer, plus up to 12 months to complete installation, and real estate can run up to 25 years. A 7(a) loan with a maturity of 15 years or more carries a prepayment penalty when the borrower voluntarily prepays 25% or more of the balance within three years of first disbursement. The penalty is 5% of the prepaid amount in year one, 3% in year two and 1% in year three (SBA terms page, above). A shop building financed for 25 years is subject to it; a 10-year acquisition or equipment loan is not. A CDC/504 project for a building requires a borrower contribution of at least 10% of the project cost.
Loans to buy an existing plumbing company
A 7(a) loan can fund a change of ownership, complete or partial, which makes it one route to buying a retiring owner's company (SBA 7(a) page, above). The target company's records carry the request. Its revenue by month, gross margin by service line, customers on service agreements and the vans and equipment offered as collateral are what the lender reads. The guide for an owner who wants to sell plumbing business sets out the same records from the seller's side, with the valuation multiples a buyer's lender will test.
Collateral follows the size of the loan. For 7(a) Small loans, the SBA does not require collateral at $50,000 or less. From $50,001 to $500,000 the lender follows its own written policy for similar non-SBA loans, and a loan "is not to be declined solely on the basis of inadequate collateral" (SBA terms page, above). For a Standard 7(a) loan, the SBA considers a loan fully secured when the lender has taken security interests in all assets being acquired (SBA types page, above).
Lender documents a plumbing company assembles
The SBA's Lender Match tool returns a summary of interested lenders two business days after a request. Its preparation list names six items: a business plan, the amount and use of funds, credit history, financial projections, collateral and industry experience (SBA, Lender Match, checked November 13, 2026). The SBA forms follow. Form 1919 collects information about the applicant and its owners and is completed by the small business applying for a 7(a) loan (SBA Form 1919, effective March 19, 2025). Form 413, the personal financial statement, is used to assess applicants for 7(a), 504 and other programs (SBA Form 413, effective February 13, 2025).
A plumbing company answers the projections item with its own history. Twelve months of revenue by month, built from its invoices, shows the lender the slow months the payment must survive. An accounts receivable aging shows how much of that revenue is still owed; the SBA's Working Capital Pilot asks for financial statements and receivable and payable agings for that reason (SBA 7(a) page, above). Margin by service line separates drain cleaning, water heaters and repipes, which carry different material costs. Invoices laid out on a plumbing invoice template with the service type on every line produce that split without a separate exercise. The certificates and coverage a lender may ask to see as a condition of the loan are covered in the guide to plumbing business insurance.
Sample financing: an acquisition loan and a jetter loan
The sample is hypothetical: a plumbing company buys a retiring owner's two-van company with a $300,000 7(a) Small loan over 10 years, and finances a trailer jetter and a drain camera costing $45,000 over 6 years. The amounts and terms are sample inputs. The rates are the SBA's November 2026 maximums at the 7.00% prime rate, the microloan range is the SBA's published range, and the fees are the fiscal 2027 schedule. A one-point rise in prime is a sample assumption, applied for the whole term to show the size of the rate risk.
| Loan | Rate | Term | Monthly payment | Upfront fee |
|---|---|---|---|---|
| Acquisition, variable at the cap | 11.50% | 120 months | $4,217.86 | 3% of $225,000 guaranteed: $6,750.00 |
| Acquisition, fixed at the cap | 12.00% | 120 months | $4,304.13 | $6,750.00 |
| Acquisition, variable after a one-point prime rise | 12.50% | 120 months | $4,391.29 | $6,750.00 |
| Jetter and camera, 7(a) variable at the cap | 13.50% | 72 months | $915.25 | 2% of $38,250 guaranteed: $765.00 |
| Jetter and camera, 7(a) fixed at the cap | 14.00% | 72 months | $927.26 | $765.00 |
| Jetter and camera, microloan at 8% | 8.00% | 72 months | $789.00 | Set by the intermediary |
| Jetter and camera, microloan at 13% | 13.00% | 72 months | $903.33 | Set by the intermediary |
The payment is the standard amortization formula: the loan amount times the monthly rate, divided by one minus (1 + monthly rate) raised to the power of minus the number of months.
Three findings come out of the table. On the acquisition, the fixed cap costs $86.27 a month more than the variable cap, and a prime rise of half a point would close that gap; after a full point, the variable payment is $87.16 above the fixed one. On the equipment, a microloan at the bottom of the SBA's range saves $126.25 a month against a 7(a) loan at its variable cap, while a microloan at 13% saves $11.92. If the jetter loan were a second 7(a) loan approved within 90 days of the acquisition, the two would be combined at $345,000, with a 75% guaranty and a 3% fee. The fee would be $7,762.50 against $7,515.00 for the two loans priced separately, $247.50 more.
Plumbing loan checklist
- List the use of funds by line: acquisition, vans, jetter and camera, inventory, working capital, building.
- Match each line to a source: 7(a) Small or Standard 7(a), Express for a revolving line, a microloan for a single tool, a conventional loan or lease for a van.
- Check each request against the rate break points at $25,000, $50,000, $250,000 and $350,000, and the fee and guaranty break at $150,000.
- Price the payment at the SBA maximum, fixed and variable, from the current H.15 prime rate and the month's FTA fixed table.
- Check the 90-day rule before applying for a second 7(a) loan, and the prepayment penalty on any 7(a) loan of 15 years or more.
- Assemble twelve months of revenue by month, an accounts receivable aging, margin by service line and an equipment list.
- Complete SBA Form 1919 and a personal financial statement for each owner the lender names.
- Request written quotes from at least two lenders, and from an SBA microloan intermediary for equipment under $50,000.
- Verify: recompute each monthly payment from the quoted rate and term before signing, and confirm the rate is at or below the SBA maximum for the loan's size and type.
Invoice and revenue records in FieldRanger
Checklist item 6 is the record a lender reads, and it is produced by the job history rather than assembled for the application. In FieldRanger, each invoice is generated from the completed work order, with invoice and payment sync to QuickBooks, so revenue by month and the receivables behind it come from the same jobs. Revenue reports show job revenue and margin by customer or service type, which is the margin-by-service-line figure the projections rest on. Technicians clock in and out with time logged against each job, so labor cost sits beside revenue on the same record.
A won HubSpot deal becomes a job with its context carried over, so the sales pipeline and the completed work are on one set of HubSpot records when a lender asks how the projections were built. Estimates are built from the HubSpot deal or contact record, or in FieldRanger and tied to the deal. The invoicing page covers the invoice record; plans, and Start free trial for 14 days with no card, are on pricing.
Frequently asked questions
What loans can a plumbing business get?
SBA 7(a) loans up to $5 million through banks and credit unions, SBA Express lines up to $500,000, SBA microloans up to $50,000 through nonprofit intermediaries, and conventional vehicle and equipment loans or leases secured by the van or machine.
What is the maximum interest rate on an SBA loan for a plumbing company in November 2026?
At the 7.00% prime rate, the variable maximum is 13.50% for loans of $50,000 or less, 13.00% to $250,000, 11.50% to $350,000 and 10.00% above. The fixed maximum is 15%, 14%, 13% and 12% across tiers that break at $25,000, $50,000 and $250,000.
Can an SBA loan be used to buy a plumbing company?
Yes. The SBA lists changes of ownership, complete or partial, among 7(a) uses, and the lender underwrites the target company's revenue, margin and collateral.
Can a plumbing company finance a jetter with an SBA microloan?
Yes. Microloans cover machinery and equipment up to $50,000, at rates the SBA says generally run from 8% to 13%, with terms set by the intermediary up to the seven-year maximum on the SBA's page.
What do lenders ask a plumbing company for?
SBA Lender Match lists a business plan, the amount and use of funds, credit history, financial projections, collateral and industry experience. SBA loans add Form 1919 and a personal financial statement on Form 413.
In the sample, the acquisition loan's fixed cap costs $86.27 a month more than its variable cap and stops costing more once prime rises half a point. The jetter's best microloan quote saves $126.25 a month against the 7(a) ceiling, so the plumbing loan request is priced against both SBA schedules and the intermediary's range before the first lender's quote arrives.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo