Guide
Plumbing Scheduling:Booked Durations by Call Type, Emergency Slots, Shared Jetters and Cameras, San Antonio Permit Paths, Texas 811 Notice and Gas Turn-On
Plumbing scheduling by call type: booked durations, emergency slots, shared jetters and cameras, San Antonio LSR permits, Texas 811 notice and gas turn-on.
Plumbing scheduling is the placing of plumbing calls on plumbers' calendars by booked duration, arrival window and the resources each call needs. Beyond a plumber, a call may need a jetter or a sewer camera, a permit path that decides whether an inspector returns, an 811 ticket before any digging, and a utility that restores gas only after inspection.
A plumbing schedule breaks on the resource nobody booked. Two main line calls start at 9 a.m. across town from each other, and the company owns one jetter. A tank water heater is booked as a three-hour swap, the customer chooses tankless on site, and the job now needs a general permit and an inspection. A sewer repair is set for Monday on a ticket placed Saturday, and the law holds the dig until Tuesday at 11:59 a.m. This guide belongs to FieldRanger's dispatching and scheduling guides, and the job records behind it are on the plumbing software page. It covers booked durations, emergency slots, shared equipment, San Antonio's permit paths, the Texas 811 rule and gas turn-on, then a sample week, a checklist and the software record.
Four terms carry the guide. A booked duration is the time held on the calendar for a call, drive time excluded. An emergency slot is an unbooked block held each day for same-day calls. An LSR permit is San Antonio's Limited Service and Repair permit, filed after certain replacements are finished. A locate ticket is the notice an excavator gives the state notification center before digging.
Plumbing call classes and booked durations
Plumbing calls differ more in what they need than in how long they take. A faucet and a drain clearing both fit a 90-minute block; only one needs a machine on the van. The table lists sample durations for a residential service company, with the resource each call needs and the condition that lengthens it.
| Call class | Sample booked duration | Resource beyond the plumber | What extends the booking |
|---|---|---|---|
| Fixture or faucet replacement | 1.5 hours | The fixture, in stock or picked up | A stop valve that will not close |
| Sink or lavatory drain clearing | 1.5 hours | Drum machine | A clog past the trap arm |
| Main line clearing with camera | 2.5 hours | Jetter or cable machine, sewer camera | No cleanout access |
| Like-for-like water heater replacement | 3 hours | The heater, a second person for the lift | Venting or connector corrections |
| Tank to tankless conversion | 7 hours | Gas line and venting materials | A general permit and a city inspection |
| Gas line repair and pressure test | 4 hours | Test gauge | City inspection before the utility turns gas on |
| Sewer spot repair by excavation | 8 hours | Locator, excavator, locate ticket | The locate window; a second day is a second job |
Durations come from the company's own completed jobs, not from a flat-rate book. A booked duration set from the median of the last 20 jobs of a class, plus a fixed allowance for drive time, gives the office a number it can defend when a call runs over.
The call class also decides who takes the call. Gas piping, backflow testing and excavation are skills a company holds in some plumbers and not others, so the class is a matching rule as well as a length. The dispatch side of the same day, such as reassigning a running-late plumber, is covered on the dispatch software page.
Emergency slots held open each day
A plumbing company that books every hour has no room for the burst supply line at 10 a.m. Emergency slots solve this with arithmetic: hold enough unbooked blocks to cover the emergency count on a chosen share of days, then release unused blocks at a fixed hour to the waiting list.
The count comes from the company's own records. The sample below covers 60 weekdays of a hypothetical five-plumber company.
| Emergency calls in the day | Days | Days at or below this count | Share of days covered |
|---|---|---|---|
| 0 | 3 | 3 | 5.0% |
| 1 | 5 | 8 | 13.3% |
| 2 | 14 | 22 | 36.7% |
| 3 | 18 | 40 | 66.7% |
| 4 | 12 | 52 | 86.7% |
| 5 | 6 | 58 | 96.7% |
| 6 | 2 | 60 | 100.0% |
The mean is 2.95 calls a day, but holding three slots covers only two days in three. Holding four two-hour slots covers 52 of the 60 days, at a cost of 8 of the day's 40 plumber hours, or 20%. On the eight days with five or six emergencies, one or two emergencies displace booked calls, and the office calls those customers before their windows open. Unused slots are released at 1 p.m. to callers who asked for the first opening.
The demand side, including how emergency calls are bought and answered, is covered in plumbing marketing. The slot count changes with the season, so the 60-day count is repeated each quarter.
Jetters, sewer cameras and locators as scheduled equipment
Drain and sewer equipment is a calendar of its own. The sample company owns one trailer jetter for five plumbers, so the jetter, the sewer cameras and the line locator are booked like people: one job at a time, with travel between jobs.
Three rules follow from treating equipment as a resource:
- A main line call books a machine as well as a plumber. The booking fails if the jetter is already on another job for the same hours, even when the plumber is free.
- Equipment travels with a van. A camera on Plumber 2's van at 9 a.m. is not available to Plumber 4 at 10 a.m. across town; the hand-off is a stop on someone's route.
- Excavation needs the locator before the dig. A sewer repair cannot start until the line is located and the ticket window has passed.
In the sample company, one jetter and two cameras serve five plumbers. Ten main line calls in a week use 25 jetter hours of a possible 40, so the week has room. Tuesday does not: four main line calls are requested for the morning, and only two can run before noon. The office offers the other two customers afternoon windows at the time of booking.
San Antonio permit paths: LSR certification and general permits
San Antonio gives a plumbing schedule two shapes for the same appliance. Under the Development Services Department's (DSD) Information Bulletin 121c (revised September 25, 2026), the Limited Service and Repair program "allows minor projects to be completed by licensed plumbing contractors prior to obtaining the associated permit" and lets the contractor certify code compliance "in lieu of scheduling an inspection".
Eligible work is narrow. It covers replacement of an existing water heater "connected to an existing venting system, gas and/or electric circuit in the same location", replacement of a water softener, purifier or water closet, and a softener or purifier in a building already pre-plumbed for one. The bulletin excludes relocations, new piping, work generally valued at more than $2,000, and any change of type or size, naming tank to tankless, tankless to tank, electric to gas and gas to electric. Those jobs require a general permit "including the required inspections by DSD".
The two paths produce different calendars:
- LSR path. One visit. The contractor obtains the LSR permit "within three (3) working days after completing the work". DSD then notifies the owner, who may request an inspection within 30 days; the owner, not the contractor, coordinates access for that inspection.
- General permit path. The permit comes before the work, the plumber installs, and an inspection follows. The job holds a return slot for corrections, and the customer hears in advance that an inspector will visit.
The scheduling rule is to classify the job at booking. A water heater call that might become a tankless conversion is booked as a like-for-like swap only after the customer confirms the type and location. The permit is a priced line on the plumbing quote, and the permit number goes on the invoice once DSD issues it; the plumbing invoice template has a field for it.
Texas 811 notice on sewer and water line digs
Texas law sets the earliest start of any dig. Texas Utilities Code section 251.151 requires an excavator to notify a notification center "not earlier than the 14th day before the date the excavation is to begin or later than the 48th hour before the time the excavation is to begin, excluding Saturdays, Sundays, and legal holidays". A Saturday notification allows excavation from "the following Tuesday at 11:59 a.m." unless that Monday is a holiday, in which case Wednesday (Tex. Util. Code 251.151, as reproduced by Public.Law, which states it accessed the official text on May 26, 2025; read November 13, 2026).
The notice therefore belongs to the booking, not to the morning of the dig. A ticket placed Thursday at 9 a.m. counts 24 hours to Friday at 9 a.m., skips the weekend, and reaches 48 hours on Monday at 9 a.m. The 14-day ceiling means a dig booked three weeks out waits for its ticket until the second week.
Emergencies have their own rule. Section 251.155 lets an excavator begin immediately on "an emergency excavation that is necessary to respond to a situation that endangers life, health, or property", with notice to the center "as promptly as practicably possible" (Tex. Util. Code 251.155). The same section penalizes misrepresenting an emergency, so a collapsed sewer under a flooding house qualifies and a customer's preferred date does not.
Gas piping repairs and the CPS Energy turn-on
Gas work ends on a utility's calendar. CPS Energy's home renovation steps state that it needs a copy of the gas permit and later the city's inspection before it turns on permanent service, and its own site, trench and gas rough-in inspections take 24 hours' notice (CPS Energy, home renovation, read November 13, 2026). A gas line repair is therefore three appointments with three parties: the plumber's repair and pressure test, the city inspection, and the turn-on.
Material choice can stop the last appointment. DSD's Information Bulletin 251 (March 3, 2026) records that CPS Energy "will not knowingly connect its gas distribution system to a PEX-AL-PEX or a PE-AL-PE fuel piping systems", and warns that an approved inspection using the material may still end with CPS not connecting. The material is settled when the job is booked, because a passed inspection does not restore gas on that piping.
The customer is without gas from the shut-off until the turn-on. The office books the inspection request on the day the test passes and tells the customer which of the three appointments the company controls.
Sample week for a five-plumber San Antonio company
The company is hypothetical: five plumbers on 40-hour weeks, one trailer jetter and two sewer cameras, serving residential customers in San Antonio. Call counts and durations are samples from the tables above. The wage is the BLS 2025 median for plumbers in the San Antonio-New Braunfels metro, $27.97 an hour, published by O\NET ([O\NET, Texas wages for 47-2152.00](https://www.onetonline.org/link/localwages/47-2152.00?st=TX), read November 13, 2026).
| Call class | Calls | Booked hours | Drive hours |
|---|---|---|---|
| Fixture or faucet replacement | 12 | 18.0 | 6.0 |
| Sink or lavatory drain clearing | 30 | 45.0 | 15.0 |
| Main line clearing with camera | 10 | 25.0 | 5.0 |
| Like-for-like water heater, LSR path | 8 | 24.0 | 4.0 |
| Tank to tankless conversion, general permit | 2 | 14.0 | 1.0 |
| Gas line repair and pressure test | 3 | 12.0 | 1.5 |
| Sewer spot repair by excavation | 1 | 8.0 | 0.5 |
| Booked work | 66 | 146.0 | 33.0 |
| Emergency slots, 4 × 2 hours × 5 days | 40.0 | ||
| Total held | 219.0 |
The week is overbooked by 19 hours. Five plumbers supply 200 hours; booked work, drive time and emergency slots hold 219. Moving the two tankless conversions and four fixture calls to the next week frees 14 + 6 + 1 + 2 = 23 hours and leaves 4 hours of slack. Kept on the calendar, the 19 hours are $531.43 of plumber time at the median wage that the week does not contain.
The LSR filings land the following week. Four of the eight heaters finish on Thursday and Friday. Three working days from a Friday completion runs Monday, Tuesday and Wednesday, so the office's permit queue for the week ends the next Wednesday.
The sewer dig moves on the ticket. The repair was requested on Saturday morning. A Saturday notice allows digging from Tuesday at 11:59 a.m., so the 8-hour repair starts Tuesday afternoon and runs into Wednesday, booked as two dated jobs.
The tankless return visit has a cost. Each general-permit conversion holds a correction slot of one hour plus 0.5 hours of drive: $41.96 of plumber time at the median wage if the inspector finds a correction, and an open hour to release if not.
Plumbing scheduling checklist
- Booked durations set by call class from the median of recent completed jobs, with a drive allowance per call.
- Each call class mapped to the equipment it needs: jetter, camera, locator, test gauge.
- Emergency slots sized from a 60-weekday count, held each morning and released at a fixed hour.
- Water heater calls classified at booking as LSR replacement or general permit, by type, size and location.
- LSR permits filed within three working days of completion, tracked in a queue with the completion date.
- Locate tickets placed at booking for every dig, counting 48 hours without weekends or holidays, and no more than 14 days out.
- Gas jobs booked with the pressure test, the city inspection request and the utility turn-on as named steps, and fuel piping material confirmed before the work.
- Multi-day digs and remodel phases split into one dated job per day.
- Weekly capacity checked: booked hours, drive hours and emergency slots against plumber hours.
- Verify each Friday: compare the jetter's booked hours with its job log, and confirm that every LSR job completed that week appears in the permit queue.
Plumber calendars, equipment and permits in FieldRanger
FieldRanger keeps the schedule on the HubSpot records the work was sold on: a won HubSpot deal becomes a job with its context carried over, and an estimate starts from the HubSpot deal or contact record or in FieldRanger, tied to its deal. The drag-and-drop calendar assigns and reschedules jobs, and multi-technician views show every plumber side by side with availability and current assignments. Skill-based assignment matches jobs to technicians by certification and expertise, so gas piping and excavation become matching rules. Capacity planning prevents overbooking, conflict detection warns of double-bookings, and time window management sets arrival windows and tracks on-time performance.
Equipment has its own records. The equipment availability calendar shows when equipment is free and prevents double-booking, and equipment assignment ties equipment to jobs and technicians, which covers the jetter and the cameras in the sample week. Recurring job templates hold repeat service calls, and auto-routing builds each plumber's route for the day. Job-level time tracking logs hours against each job, the job durations the booking table depends on, and invoices are generated from the completed work order.
FieldRanger does not file permits, 811 tickets or utility turn-on requests; those are arranged with DSD, the notification center and CPS Energy and recorded on the job. Multi-day jobs are not built, so a two-day dig is two dated jobs. Customers can book a visit online or through the office. The plumbing scheduling software page covers the dispatch board, plans are priced per technician on pricing, and Start free trial gives 14 days without a card.
Frequently asked questions
What is plumbing scheduling?
The placing of plumbing calls on plumbers' calendars by booked duration, arrival window and the resources each call needs: a jetter or sewer camera, a permit path, an 811 ticket before digging, and a utility turn-on after gas work.
How long should a plumbing call be booked for?
From the company's own completed jobs by call class, plus a drive allowance. The sample in this guide books 1.5 hours for a drain clearing, 3 hours for a like-for-like water heater and 7 hours for a tankless conversion.
How many emergency slots should a plumbing company hold each day?
Enough to cover the daily emergency count on a chosen share of days, from the company's own records. In the 60-day sample, four two-hour slots covered 52 days, at 20% of a five-plumber day.
Does a water heater replacement in San Antonio need an inspection?
A like-for-like replacement in the same location qualifies for the LSR program: the contractor files the permit within three working days and certifies compliance, and the owner may request an inspection within 30 days. A change of type, size or location needs a general permit and a DSD inspection.
How much notice does Texas require before a plumber digs?
At least 48 hours, excluding Saturdays, Sundays and legal holidays, and no more than 14 days ahead, under Texas Utilities Code 251.151. A Saturday notice allows digging from Tuesday at 11:59 a.m.; emergencies may start at once with prompt notice.
When does CPS Energy turn gas back on after plumbing work?
After the city's inspection, which CPS Energy needs before turning on permanent service. CPS Energy states it will not knowingly connect to PEX-AL-PEX or PE-AL-PE fuel piping.
The San Antonio week closed with 4 spare hours only after two tankless conversions moved: a 19-hour overbooking that appeared on paper because emergency slots, drive time and the single jetter were all on the calendar.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo