Guide
Plumbing Quote:Flat Rate and Time and Materials, Permit Lines, Deposits and a Priced Bathroom Rough-In
Plumbing quote method: flat rate against time and materials, permit and inspection lines from a city fee schedule, deposit limits, and a priced sample job.
A plumbing quote is the price a plumbing company commits to before the work, built from labor hours at a loaded rate, parts, permit and inspection fees, trip costs and overhead. It is written as a flat rate, one fixed price for the task, or as time and materials, an hourly rate plus parts at a markup.
A plumbing quote goes wrong in the lines it leaves out. A permit fee missing from a flat-rate price comes out of the margin; a failed inspection adds a reinspection fee and a second trip that nobody priced; a flat rate on a job with hidden conditions absorbs every extra hour; a free quote visit is a cost that only won jobs can repay. This guide is one of the pricing and quoting guides from FieldRanger, which makes the plumbing software that keeps quotes and jobs on HubSpot records. It sets out what a plumbing quote contains, compares flat rate with time and materials, and lists the sourced cost inputs and the permit lines from a published city fee schedule. A bathroom rough-in is then priced both ways, before free quotes, California's deposit rules, a checklist and the software record.
Three terms carry the method. A flat rate is a fixed price for a defined task, so the company carries the risk of a long job and keeps the gain from a short one. Time and materials bills the hours worked at a stated rate and the parts used at a stated markup, so the customer carries the risk of a long job. A permit line is the fee the building department charges for the work and its inspections, shown on the quote as its own line.
Plumbing quote contents
A plumbing quote holds the general fields of any quote, listed with a filled example on the quote template, plus five that plumbing work adds.
- Scope by fixture and system. Each fixture, valve and run of pipe named, with the location, so a second plumber could price the same work.
- Code work. Upgrades the inspector will require on this job, such as a shut-off, a vent or a backflow device, priced as their own lines rather than discovered later.
- Permit and inspection lines. The permit fee from the city's schedule, the number of inspections expected, and the reinspection fee if an inspection fails.
- Concealed conditions. The terms that apply if the walls or the ground reveal something the quote did not assume, stated as an hourly rate or a change order.
- Exclusions. Drywall repair, tile, excavation restoration and other work the plumber does not do.
The quote carries a valid-until date, the deposit and payment schedule, and the acceptance signature. Once accepted, its number and lines travel onto the work order and then the plumbing invoice, where the plumbing invoice template shows how labor, parts, trip charges and Washington's tax on plumbing labor appear.
Flat rate and time and materials compared
The two methods price the same costs and differ in who carries the uncertainty about hours.
| Dimension | Flat rate | Time and materials |
|---|---|---|
| What the quote states | One price for the defined task | An hourly rate, a parts markup and an estimate of hours |
| Who carries a long job | The company | The customer |
| Who keeps a short job's savings | The company | The customer |
| Suits | Repeatable tasks with known hours and parts | Work with hidden conditions: leaks in walls, sewer lines, old galvanized pipe |
| Proof on the invoice | The accepted quote | Timesheets and parts receipts |
| Point of dispute | Whether the work was in the defined scope | Whether the hours were reasonable |
A company can use both on one quote: a flat rate for the defined fixture work and a time and materials line, with a cap or a change-order rule, for the part of the job nobody can see yet.
Cost inputs for a plumbing quote
Each input below has a published source, or is labelled as a sample for the company to replace with its own figure.
Labor. The May 2025 median wage for plumbers, pipefitters and steamfitters was $30.67 an hour (BLS Occupational Outlook Handbook, modified October 29, 2026). Wages are 70.0% of employer compensation cost in private industry (BLS Employer Costs for Employee Compensation, June 2026), so the loaded rate is $30.67 ÷ 0.700 = $43.81 an hour.
Overhead. Insureon's medians for plumbing contractors are $1,768 a year for general liability, $3,415 for commercial auto, $505 for tools and equipment, and $2,150 for workers' compensation (Insureon, plumbing business insurance cost, updated November 4, 2026). Those come to $7,838. With a sample $14,000 for the shop, phones, software, marketing and office, overhead is $21,838 a year; over a sample 1,500 billable hours, the overhead rate is $14.56 an hour. Labor and overhead together cost $58.37 per billable hour.
Vehicle. Road miles are priced at the IRS business rate of 76 cents a mile from July 1, 2026 (IRS standard mileage rates).
Parts. Parts are priced at the supplier's invoice to the company, which varies by supplier and account. The sample below labels its parts figure as a sample.
Permit. The permit fee comes from the building department's published schedule for the city where the work is done, as set out in the next section.
Permit and inspection lines from a city fee schedule
Permit fees are set by each city or county, so a quote reads the schedule of the jurisdiction where the job sits. Monroe, Washington publishes a per-unit schedule effective January 1, 2026. A plumbing permit carries a base fee of $32.00 plus $11.00 for each fixture, including a toilet, a lavatory, a shower, a water heater or a tankless water heater. Sewer repair is $26.00, water installation or repair $26.00, and side sewer inspection or installation $78.00. A gas-fired water heater appears on the mechanical schedule at $16.00 on a $32.00 base, with gas piping for fewer than five outlets at $11.00. A reinspection costs $52.00, and all permits are subject to a 5% technology fee (City of Monroe, Schedule B Plumbing and Mechanical Fees, effective January 1, 2026).
Three quote decisions follow from a schedule like this one.
- The permit is its own line. Shown separately, it explains part of the price to a customer comparing quotes, and it can be passed through at cost on a time and materials quote.
- The reinspection is a priced risk. A failed inspection costs the $52.00 fee, a return trip and an hour; on a flat-rate quote the company absorbs it, so the quote either prices it in or states it as an extra.
- The number of permits is checked. A gas appliance can need a mechanical permit beside the plumbing one, and the schedule shows two base fees where a single permit might have been assumed.
Bathroom rough-in quoted two ways
The sample job is a bathroom rough-in and fixture set in Monroe, Washington: a toilet, a lavatory and a shower valve. The hours, the parts figure, the trips and the 20% target margin are sample inputs, labelled as such; the rates and the permit fees are those cited above.
The permit is $32.00 base plus three fixtures at $11.00, $65.00, plus the 5% technology fee of $3.25, for $68.25. Three trips of 14 miles each, for the rough-in, the inspection and the set, come to 42 miles.
| Line | Calculation | Amount |
|---|---|---|
| Labor | 9 hours × $43.81 | $394.29 |
| Overhead | 9 hours × $14.56 | $131.04 |
| Parts and materials | Sample supplier price | $640.00 |
| Permit | $65.00 base and fixtures + $3.25 technology fee | $68.25 |
| Mileage | 42 miles × $0.76 | $31.92 |
| Cost of the job | Sum of the lines | $1,265.50 |
| Flat-rate price at a 20% margin | $1,265.50 ÷ 0.80 | $1,581.88 |
The time and materials version bills the same costs differently. The hourly rate is the labor and overhead cost divided by 0.80: $58.37 ÷ 0.80 = $72.96 an hour. Parts are billed at cost ÷ 0.80, or $800.00, and the permit and mileage pass through at cost.
| Line | At 9 hours | At 12 hours |
|---|---|---|
| Labor at $72.96 an hour | $656.64 | $875.52 |
| Parts at cost ÷ 0.80 | $800.00 | $800.00 |
| Permit at cost | $68.25 | $68.25 |
| Mileage at cost | $31.92 | $31.92 |
| Customer's bill | $1,556.81 | $1,775.69 |
At the estimated 9 hours the two methods land within $25.07 of each other. At 12 hours they part: the time and materials bill rises by $218.88 and the company's margin holds, while the flat-rate price stays at $1,581.88 against a cost of $1,440.61, and the margin falls from 20% to 8.93%. A failed inspection adds $121.01 more to the flat-rate cost: the $52.00 reinspection fee, 14 miles at $10.64 and an hour at $58.37.
The method choice therefore turns on how well the hours are known. A rough-in in new framing has hours a company can measure from its own records and quote flat. The same fixtures in a 1950s bathroom with galvanized supply lines do not, and a time and materials line for the concealed work, beside a flat rate for the fixtures, keeps the quote honest about what is unknown.
Free plumbing quotes and diagnostic fees
A free plumbing quote is free to the customer and not to the company. In the sample, a quote visit takes one hour at $58.37 and 14 miles at $10.64, so each visit costs $69.01. If one quote in three is accepted, a sample rate, every won job carries $207.03 of quoting cost before any work is done.
Three policies recover it, and a company can use different ones for different work. A free quote for replacements and planned work prices the quoting cost into the jobs that are won, which the 20% margin above has to cover. A diagnostic or trip fee for repairs charges the visit and credits it against the work if the customer goes ahead. A remote quote from photos and a phone call prices simple, repeatable tasks without a visit, with the scope confirmed on arrival. The visit is also where marketing spend turns into a job, so the lead channels in the guide to plumbing marketing are measured by the quotes they produce and the share accepted.
Deposits and written contracts for plumbing work in California
California sets rules on the document a plumbing quote becomes once it is accepted for home improvement work. The Contractors State License Board states that a written contract is required for home improvement projects over $500. The contract identifies the contractor, the business address and the license number, describes the work and materials, carries a detailed written payment schedule, states who will obtain the permits, and gives a completion date. The down payment cannot be more than $1,000 or 10 percent of the contract price, whichever is less, with no exception for special-order materials, and payments cannot exceed the value of the work performed (CSLB, Learn About Home Improvement Contracts, checked November 12, 2026).
On the sample bathroom at $1,581.88, the California cap is the lesser of $1,000 and $158.19, so the deposit is at most $158.19, and the parts bought before work starts are financed by the company. Other states set their own limits, and the quote's deposit line follows the state where the work is done.
Plumbing quote checklist
- Name each fixture, valve and pipe run in the scope, with its location.
- Price the code work the inspector will require as its own lines.
- Read the permit fee from the jurisdiction's current schedule, including base fees, per-fixture fees and any technology fee, and confirm whether more than one permit applies.
- Price the reinspection risk into a flat rate, or state it as an extra.
- Choose flat rate for known hours and time and materials, with a cap or change-order rule, for concealed work.
- State exclusions, the valid-until date, the deposit within the state's limit and the payment schedule.
- Record the quote visit's time and miles, and compare quotes sent with quotes accepted each month.
- After the job, compare recorded hours and parts with the quote, and adjust the hours for the next quote of that task.
Plumbing estimates on the HubSpot deal
A quote priced from cost depends on two records the company makes after the work: the hours each task actually took and the parts actually used. FieldRanger keeps both on the same HubSpot records as the quote.
An estimate is built from the HubSpot deal or contact record without leaving HubSpot, or built in FieldRanger and kept tied to the HubSpot deal it belongs to, and PandaDoc can send it for signature; the estimating software page shows the sequence. A won deal becomes a job with its context carried over, technicians clock in and out with time logged against each job, and the invoice is generated from the completed work order. Payment can be taken in the field through Stripe, invoices and payments sync with QuickBooks, and revenue reports show job revenue and margin by customer or service type, which is where a flat rate that keeps running long shows up.
Frequently asked questions
What should a plumbing quote include?
The scope by fixture and pipe run, the code work the inspector will require, the permit and inspection fees, the terms for concealed conditions, exclusions, the price or the hourly rate and parts markup, the valid-until date, the deposit and payment schedule, and a place to accept.
Are plumbing quotes free?
A quote can be free to the customer, but it is never free to the company. In this guide's sample, a quote visit costs $69.01 in time and miles, and at one accepted quote in three each won job carries $207.03 of quoting cost. Some companies charge a diagnostic fee for repairs and credit it against the work.
Is flat rate or time and materials better for a plumbing quote?
Flat rate suits tasks whose hours are known from the company's own records; time and materials suits concealed work such as leaks in walls or old pipe. In the sample, a 9-hour job overrunning to 12 hours cut the flat-rate margin from 20% to 8.93%.
Does a plumbing quote include the permit fee?
It should, as its own line, read from the schedule of the city where the work is done. Monroe, Washington charges a $32.00 base plus $11.00 per fixture and a 5% technology fee, and $52.00 for a reinspection.
How much deposit can a plumber ask for?
It depends on the state. For California home improvement work, CSLB limits the down payment to $1,000 or 10 percent of the contract price, whichever is less, and later payments cannot exceed the value of work performed.
What is the difference between a plumbing quote and a plumbing estimate?
A quote commits to a price for defined work until a stated date; an estimate gives an approximate price that can change as the work proceeds. A time and materials quote sits between them: the rate is fixed and the total depends on the hours.
The bathroom in the sample costs the same to plumb whichever method prices it; the method decides who pays for hours 10 through 12 and for a failed inspection. The pricing and quoting guides apply the same arithmetic to other trades, the plumbing software page follows the quote onto the job, and the per-technician plans and a no-card 14-day trial are on FieldRanger pricing.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo