Guide

Soft Washing Company:Sodium Hypochlorite Handling, Runoff Rules, Roof and Siding Maker Guidance and a Costed House Wash

Soft washing company guide: handling sodium hypochlorite under its SDS, EPA stormwater runoff rules, roof and siding maker guidance and a costed house wash.

By Published Updated

13 min read

A soft washing company cleans roofs and siding with a low-pressure spray of diluted sodium hypochlorite, surfactant and water, then rinses at low pressure. Running one adds three duties a pressure washing business does not carry: handling a corrosive chemical under its safety data sheet, keeping chlorinated runoff out of storm drains, and following each surface maker's cleaning instructions.

The failures in this trade are specific and expensive. A crew stores acid-based rust remover beside the bleach on the trailer. A gallon of concentrate reaches a street gutter during a rinse. A house wash uses a mix that the siding maker says can damage the panel. FieldRanger sells power washing software for crews whose customers sit in HubSpot, and this guide covers the company behind those jobs. It starts with the services sold to homeowners, then sets out the chemical from one manufacturer's safety data sheet, the transport limits for concentrate, the federal stormwater rules and the roof and siding makers' guidance. It closes with a costed house wash, a checklist and the job records behind each step. Start-up costs, permits and insurance for washing in general are in the guide to starting a pressure washing business.

Four terms carry the article. Soft washing removes algae, mildew and dirt by chemistry and dwell time; pressure washing removes them by the force of the water. The two are different methods, not two settings of one machine. Sodium hypochlorite is the active ingredient of bleach, sold to soft washers as a concentrate at 12.5 percent and other strengths. Dwell time is the period the mix stays on the surface before the rinse. An MS4, a municipal separate storm sewer system, is the network of storm drains, pipes and ditches that carries runoff to streams without treatment.

Soft washing home services by surface

Soft washing home services are priced and scheduled by surface. Each surface carries its own manufacturer guidance and its own mix. The residential list is short: siding, asphalt shingle roofs, gutter faces, soffits and fascia, and sometimes fences and decks. The commercial list adds storefronts, stucco and concrete walls, awnings and multifamily buildings, bid by the building and scheduled around tenants.

The two markets differ more in paperwork than in chemistry. A homeowner buys one wash and wants the plants alive afterward. A property manager buys a recurring program and wants a certificate of insurance, a runoff plan for the site and a schedule that keeps the parking lot open. Each market has its own guide: residential soft washing and commercial soft washing. In both, the estimate names the surface material, since the material decides whether bleach may be used at all.

Sodium hypochlorite on the Formosa safety data sheet

Formosa Plastics Corporation, Texas, publishes one safety data sheet for its 10, 12.5 and 15.5 percent sodium hypochlorite solutions (Formosa Plastics, Sodium Hypochlorite Solution SDS, Version 5, revised April 17, 2026). It is a useful reference because it states the hazards a crew meets on every job in one document.

Sodium hypochlorite solution hazards and controls, from the Formosa SDS (Version 5, April 17, 2026)
SDS itemWhat the sheet statesField practice that follows
ClassificationSkin corrosion 1A (H314), eye damage 1 (H318), aquatic acute 1 (H400); signal word DANGERTreat concentrate as a corrosive and an environmental hazard
Eye and faceSafety glasses with side shields; splash goggles for high-exposure tasksGoggles for every pour from pail to tank
Hands and bodyChemical-resistant gloves; chemical-resistant coveralls or apron and boots for splashing tasksGloves taped to sleeves during roof work
IncompatiblesDo not mix with acids, ammonia, alcohol, ethers or hydrocarbons; contact with acids releases toxic gasesAcid brighteners and rust removers stored apart from the bleach
StorageDo not store together with acids; protect containers from heatShade or a closed box on the trailer, never beside acid products
SpillsKeep spilled material out of sewage and drainage systems and waterwaysSpill kit and drain cover carried on the rig
Reportable quantity100 lbs of sodium hypochlorite; releases above it are reported to the National Response CenterRelease volumes recorded on the work order
TransportUN1791, Hypochlorite solution, Class 8, Packing Group III, marine pollutantPails marked with the shipping name

Two lines on the sheet change how a soft wash rig is built. The first is the incompatibility line: the acid products a crew carries for rust stains and wood brightening ride in a separate compartment from the chlorine, since a leak of one into the other releases gas in a closed trailer. The second is the reportable quantity. It counts pounds of sodium hypochlorite rather than pounds of solution, so the gallons that reach it depend on the product's strength, and a spill from a full bulk tank is a reporting question as well as a cleanup.

OSHA's Hazard Communication standard applies to all employers whose workers use a hazardous chemical: the employer keeps a safety data sheet for each one, readily accessible during each work shift, and trains employees on the hazards in their work area (OSHA, 29 CFR 1910.1200(g) and (h), checked November 12, 2026). The sheet for the product actually bought, not a generic one, belongs in the truck and on the job record.

Concentrate transport under the materials of trade exception

Concentrate travels under federal hazardous materials rules once it is on a public road. A material of trade carried under the exception "is not subject to any other requirements of this subchapter" beyond the section's own, which removes shipping papers and placards, provided the limits hold: 30 liters, or 8 gallons, per packaging for a Packing Group III material such as this one, and an aggregate gross weight of 200 kilograms, or 440 pounds, of all materials of trade on one vehicle (49 CFR 173.6, via Cornell LII, checked November 12, 2026). The packaging must be leak tight and either the manufacturer's original packaging or one of equal strength, it must be marked with a common name or the proper shipping name, and the driver must be told the material is aboard.

The 5-gallon pail fits the exception; a bulk tank of concentrate does not. A 55-gallon drum, or any tank larger than 8 gallons filled with undiluted product, is outside the exception on capacity alone and falls under the full hazardous materials rules. Tank size is therefore a regulatory decision as well as a production one, made in the equipment plan before the trailer is ordered.

Runoff rules under the EPA stormwater program

Federal stormwater rules reach a soft wash job through the local storm drain. Every regulated small MS4 operator must, under its permit, "effectively prohibit through an ordinance, or other regulatory mechanism" non-stormwater discharges into the system and enforce that prohibition (EPA, Illicit Discharge Detection and Elimination fact sheet 2.5, August 2023). An illicit discharge is any discharge to the MS4 not composed entirely of stormwater.

The same fact sheet lists the flows an MS4 program need not address unless the operator finds them to be significant contributors of pollutants. Street wash water, individual residential car washing, lawn watering and dechlorinated swimming pool water are on the list. Building wash water is not, and chlorinated house wash runoff is the opposite of a dechlorinated discharge. MS4 operators must obtain NPDES permits and run stormwater management programs (EPA, Stormwater discharges from municipal sources, updated May 20, 2026). The city's ordinance under that program is the rule a crew answers to on the street.

Three controls follow from the federal structure and the SDS together. The crew covers or plugs the storm drain inlets downhill of the work before the first spray, as the SDS directs that spilled material stay out of drainage systems. Runoff goes to landscaping only where the local ordinance allows it, with the plants pre-wetted and rinsed. Where the ordinance does not allow it, runoff is collected and hauled, or sent to a sanitary sewer with the utility's permission. The work order records which control was used, so the answer exists if an inspector asks.

Manufacturer cleaning guidance for roofs and siding

Surface makers publish cleaning instructions, and they do not agree with each other or, in one case, with themselves. The table sets out what four manufacturers state on their own pages.

Roof and siding manufacturer cleaning guidance (manufacturers' pages, checked November 12, 2026)
Surface and makerPressureBleach or sodium hypochloriteSource
Asphalt shingles, Owens Corning, 2023 page"Do not scrub or use high-pressure power washing equipment"One gallon each of bleach and water, 10 to 20 minutes, ground vegetation covered[Owens Corning, dark streaks](https://www.owenscorning.com/en-us/roofing/blog/algae-resistance), published February 15, 2023
Asphalt shingles, Owens Corning, 2026 pageLow-pressure soft wash; pressure washer not recommended"Avoid using any chemicals"; Owens Corning "does not test or recommend specific cleaning products"[Owens Corning, cleaning roof shingles](https://www.owenscorning.com/en-us/roofing/blog/cleaning-asphalt-roof-shingles), published May 8, 2026
Fiber cement, James Hardie"Don't use a high-pressure power washer"; garden hose"Do not use harsh chemicals, such as bleach or acid"; mildew-specific cleaner[James Hardie, cleaning siding](https://www.jameshardie.com/blog/siding-durability/tips-for-cleaning-your-siding/), April 17, 2024
Vinyl, CertainTeedDoes not recommend power washing vinyl or polymer siding1 quart of 5% sodium hypochlorite, 3 quarts water, 1/3 cup detergent, 2/3 cup trisodium phosphate; "Greater concentrations may cause damage"[CertainTeed, how to clean vinyl siding](https://www.certainteed.com/inspiration/how-tos/how-clean-vinyl-siding)
Vinyl, Ply Gem1,500 to 2,400 PSI with a 40-degree tip, never aimed upwardSame quart-to-three-quarts mildew recipe[Ply Gem, how to clean vinyl siding](https://www.plygem.com/ideas-inspiration/blog/how-to-clean-your-vinyl-siding/)

Three findings follow from the table.

The vinyl recipe sets a ceiling a crew can compute. One quart of 5 percent solution in a gallon of mix is 1.25 percent sodium hypochlorite. From 12.5 percent concentrate, the same strength is one part concentrate to nine parts water: 1 gallon of concentrate in a 10-gallon batch. A stronger siding mix exceeds what CertainTeed and Ply Gem publish, and CertainTeed warns that greater concentrations may damage the siding.

Fiber cement is a no-bleach surface by its maker's instruction. James Hardie names bleach among the harsh chemicals not to use. A soft washing company that treats every house the same way is therefore outside the manufacturer's guidance on every Hardie-clad home. The estimate form needs a siding material field, and the crew needs a non-bleach method for fiber cement.

Owens Corning's two pages leave a roof wash without a current manufacturer recipe. The 2023 page gives a 1:1 bleach and water method; the 2026 page says to avoid chemicals and states that the company does not test or recommend cleaning products. Neither page states the strength of the bleach, and the 2026 page warns that a pressure washer can "potentially void any manufacturer warranties". A roof wash agreement therefore names the method and the mix, and records that the homeowner chose the service. The crew photographs the roof before and after, so a later warranty question has an answer.

Pesticide labels and algae claims

Sodium hypochlorite products are sold as registered pesticides when their labels claim to kill organisms, and the EPA's position on a registered label is direct: "It is a violation of Federal law to use this product in a manner inconsistent with its labeling," or, in the agency's words, "the label is the law" (EPA, Introduction to pesticide labels, updated June 2, 2026). A soft washing company reads the label of the concentrate it buys for the uses it lists, and words its service descriptions to match. The question of whether selling "algae removal" brings the work under a state applicator license is set out in the pressure washing business guide and answered by the state's lead pesticide agency.

Costed house wash: a vinyl-sided two-story home

The sample costs one house wash for a hypothetical two-person crew. The siding is vinyl, so the mix follows the 1.25 percent ceiling above. The mix volume, hours and mileage are sample inputs, labelled as such; the rates beside them are sourced and dated.

  • Concentrate: ProActive Solutions Chlor-125, 12.5 percent sodium hypochlorite, $64.30 for a 5-gallon pail (DFA Farm Supplies listing, checked November 12, 2026), or $12.86 a gallon.
  • Labor: the nearest occupation, Cleaners of Vehicles and Equipment, had a median wage of $17.23 an hour in 2025 (O\*NET OnLine, 53-7061.00, checked November 12, 2026), plus the employer's 7.65 percent share of Social Security and Medicare (IRS Topic 751, updated November 9, 2026).
  • Truck and trailer: the IRS business standard mileage rate of 76 cents a mile from July 1, 2026 (IRS standard mileage rates, updated July 28, 2026).
Direct cost of one sample house wash (sample inputs labelled; sourced rates checked November 12, 2026)
LineBasisAmount
Mix applied40 gallons at 1.25 percent (sample input)4 gallons of concentrate
Concentrate4 gallons × $12.86$51.44
Crew hours2 workers × 3.5 hours on site, plus 0.5 hours driving each (sample input)8 labor hours
Wages8 × $17.23$137.84
Employer Social Security and Medicare7.65% × $137.84$10.54
Truck and trailer24-mile round trip (sample input) × $0.76$18.24
Direct cost of the washSum of the lines above$218.06

The concentrate is under a quarter of the direct cost, and labor is almost two thirds of it. Surfactant, workers' compensation, unemployment taxes, insurance and equipment sit outside the table; each is added per job in the costing set out for the pressure washing business plan template. A wrong surface call costs the same $218.06: a fiber cement house washed with this mix carries the full cost and a method its manufacturer says not to use. The siding material is therefore recorded before the price is quoted.

Soft washing company checklist

  1. Keep the safety data sheet for each concentrate bought, by manufacturer and version, in the truck and in the job file.
  2. Store sodium hypochlorite apart from acids on the trailer, in shade, with a spill kit and a drain cover beside it.
  3. Size concentrate containers at 8 gallons or less if the business relies on the materials of trade exception, and keep the vehicle's total under 440 pounds.
  4. Read the city's stormwater ordinance for the service area and record which runoff control it allows: landscape, collection or sanitary sewer.
  5. Record the surface material on every estimate and match the method to the maker: no bleach on James Hardie fiber cement, no stronger than 1.25 percent on vinyl.
  6. Write the roof method and mix into the agreement, and photograph the roof before and after the wash.
  7. Read the concentrate's pesticide label for the uses it lists, and word service descriptions to match.
  8. Verify the controls on the first job of each season: drain covered before spraying, plants pre-wetted and rinsed, release volume and runoff control written on the work order.

Job records for soft wash crews in FieldRanger

The checklist works only if each job carries its own record. FieldRanger runs that record on the customer's HubSpot data. An estimate can be built from the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger and tied to the deal, as described on the estimating software page; estimates and agreements can go out for signature through PandaDoc. A won deal becomes a job with its context carried over, and the dispatcher assigns and reschedules jobs by dragging them on the calendar.

On site, a custom checklist on the work order holds the drain cover, plant protection and surface-material steps. Before and after photographs attach to the work order and sync to the customer's HubSpot record. Clock-ins log time against each job, so the hours in the table above come from the record rather than from memory. The invoice is generated from the completed work order, and revenue reports show job revenue and margin by service type, which separates house washes from roof washes. Recurring job templates hold annual washes for repeat customers. Customers can book a wash online, and other requests arrive by phone, by form or through the sales pipeline. Plans are on pricing, and Start free trial runs 14 days with no card.

Frequently asked questions

What does a soft washing company do?

A soft washing company cleans roofs, siding and other exterior surfaces with a low-pressure spray of diluted sodium hypochlorite, surfactant and water, left to dwell and then rinsed at low pressure. The chemistry removes algae and mildew that pressure alone would remove only by risking damage to the surface.

Is soft washing the same as pressure washing?

No. Pressure washing removes dirt by the force of the water; soft washing removes it by chemistry and dwell time at low pressure. Manufacturers such as Owens Corning and CertainTeed advise against power washing their roofing and vinyl siding, which is where soft washing is sold.

What PPE does soft washing require?

The Formosa safety data sheet for sodium hypochlorite solution lists safety glasses with side shields, splash goggles for high-exposure tasks, chemical-resistant gloves, and chemical-resistant coveralls or an apron and boots where splashing is likely. Respiratory protection is set by an industrial hygiene assessment.

Can soft wash runoff go into a storm drain?

Not under the ordinances that MS4 operators must adopt to prohibit non-stormwater discharges. The EPA's list of flows a program need not address includes street wash water and residential car washing, but not building wash water. Crews cover drains and direct runoff to landscaping, collection or a sanitary sewer as the local rule allows.

What mix strength is safe on vinyl siding?

CertainTeed and Ply Gem publish a mildew recipe of 1 quart of 5% sodium hypochlorite in 3 quarts of water with detergent and trisodium phosphate, which is 1.25 percent. From 12.5 percent concentrate that is 1 gallon in a 10-gallon batch. CertainTeed warns that greater concentrations may damage the siding.

Can James Hardie siding be soft washed with bleach?

James Hardie's cleaning page says not to use harsh chemicals such as bleach or acid, and not to use a high-pressure washer. It recommends a garden hose, a soft brush and, for mildew, a mildew-specific cleaner.

The vinyl maker's recipe comes to 1.25 percent, the fiber cement maker's to no bleach at all, and the shingle maker publishes one answer from 2023 and another from 2026; a soft washing company earns its margin by writing the surface material on the estimate before it mixes a gallon.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo