Guide

Transparent Roofing Contractor Pricing:Published Price Lines, Illinois Contract and Cancellation Rules, a Unit-Price Method and a Palatine Reroof

Transparent roofing contractor pricing: price per square, tear-off, decking and permit lines, Illinois contract and cancellation rules, and a Palatine reroof.

By Published Updated

11 min read

Transparent roofing contractor pricing is a published price sheet that states what each part of a reroof costs: an installed price per square, a tear-off price per square for each layer, a unit price for each sheet of decking replaced, the ice barrier, and the permit at cost. The homeowner can then recompute the contract total from the measurements.

A roof priced as one lump sum leaves the homeowner nothing to check, and the dispute arrives after tear-off. The crew finds soft decking, the office adds sheets the homeowner never saw priced, and the final invoice is higher than the signed number with no written basis for the difference. FieldRanger makes roofing contractor software that runs inside HubSpot, and this page belongs to the pricing and quoting guides. It sets out the price lines a roofer publishes, the published national ranges and their limits, Illinois's written contract and cancellation rules, a method for turning cost into a unit price, a sample reroof in Palatine, Illinois, and the decking count after tear-off. A checklist and a FAQ close it.

Three terms carry the page. A square is 100 square feet of roof surface. A unit price is a fixed price per countable item, such as a sheet of decking, agreed before the count is known. A pass-through is a cost billed at what the roofer paid, such as a permit fee, with no margin added.

Published roofing price lines: per square, tear-off, decking, ice barrier and permit

A price sheet that a homeowner can check has one line for each quantity that changes between roofs. Each line states its unit, what it includes, and what it excludes.

Price lines on a published roofing price sheet, with the unit and what each one covers
LineUnitIncludesStates separately
Installed roofPer measured squareShingles, underlayment, starter, ridge cap, drip edge, nails, labor, waste allowanceWhether the rate is per measured or per ordered square
Steep or high roofPer square, above a stated pitch or storyExtra labor and safety setupThe pitch at which it starts
Tear-offPer square, per layerRemoval, disposal and cleanupHeavy materials such as tile or slate
Decking replacementPer 4 by 8 foot sheetRemoving rotten sheathing and fastening newThe count, which is known only after tear-off
Ice barrierPer square footSelf-adhering membrane at eaves and valleysWhere the local code requires it
PermitAt costThe municipal feeNothing: a pass-through carries no margin
WarrantyNamed tierManufacturer and workmanship termsRegistration requirements

The decking line is where transparency is tested. A sheet that says "decking extra" without a price per sheet has moved the one number that changes after tear-off off the page. A sheet that says "$67 a sheet, counted and photographed after tear-off" has fixed the price and left only the count open.

Published cost ranges for roof replacement and their limits

Fixr publishes national ranges for each of these lines (Fixr, roof replacement cost, updated February 4, 2026). Its page puts the average installed cost at $4.75 a square foot, with a range of $3.75 to $11 depending on material. Tear-off and disposal average $50 a square, rising to $150 a square for heavy materials or several layers of asphalt. Ice and water shield costs about $0.50 a square foot, or roughly $50 a square. Replacement decking runs $2 to $8 a square foot, and permits $100 to $500.

The ranges are a check on a price sheet, not a source for one. They mix materials, regions and roof shapes, and a national average says nothing about labor in a particular metro area. A roofer whose published per-square price sits far outside the Fixr range should be able to say why, such as a two-layer tear-off or a steep pitch, and the price sheet is where that reason belongs.

Illinois written contract rules for roofing work over $1,000

Illinois turns part of transparent pricing into a legal requirement. Before starting home repair or remodeling work over $1,000, the contractor must give the customer a written contract or work order that states the total cost, including parts and materials listed with reasonable particularity and any charge for an estimate (815 ILCS 513/15, read November 13, 2026). The contract also states the business name and address, and a residence address where the business uses a post office box.

For a contract over $1,000, the contractor also provides the "Home Repair: Know Your Consumer Rights" pamphlet before signing, and both parties sign and date the acknowledgment form within it (815 ILCS 513/20, read November 13, 2026). The roofing license number and the licensee's name, as they appear on the license, go on all contracts and bids, and the license number appears in every advertisement for roofing services (225 ILCS 335/5, read November 13, 2026). A published price sheet is an advertisement for roofing services, so it carries the number too.

"Reasonable particularity" is the statute's own phrase, and a price sheet that names the shingle line, the underlayment, the ice barrier and the drip edge meets it more plainly than "roof system, complete." The roofing estimate template lays out those rows for a filled tear-off job.

Cancellation rights in Illinois: home sales, seniors and insurance claims

Three Illinois cancellation rights can apply to a roof contract, and each starts from a different event.

Illinois cancellation rights for a residential roofing contract (statutes read November 13, 2026)
RightApplies whenWindowSource
Home solicitation saleA sale of $25 or more is made by a seller physically present at the consumer's residence; "merchandise" includes services ([815 ILCS 505/1](https://www.ilga.gov/Documents/legislation/ilcs/documents/081505050K1.htm))3 full business days after signing; the contract carries a "Notice of Cancellation" form[815 ILCS 505/2B](https://www.ilga.gov/Documents/legislation/ilcs/documents/081505050K2B.htm)
Senior citizenA person 65 or older buys from an uninvited solicitor and the agreement is made at the home15 full business days after signing[815 ILCS 513/22](https://www.ilga.gov/Documents/legislation/ilcs/documents/081505130K22.htm)
Insurance-funded contractThe work is to be paid from a property and casualty insurance claimUntil midnight on the earlier of the fifth business day after the insurer's written notice that any part is not covered, or the thirtieth business day after the insurer receives proof of loss[815 ILCS 513/18](https://www.ilga.gov/Documents/legislation/ilcs/documents/081505130K18.htm)

The insurance-funded contract carries its own statement in at least 10-point boldface and a detachable notice of cancellation form. On cancellation, the contractor returns payments within 10 days, keeping only the reasonable value of emergency work the insured agreed in writing was needed to prevent damage. The same section bars advertising or promising to pay or rebate any part of the insurance deductible, including through an allowance or discount. A price sheet with a "deductible discount" line is therefore an advertisement Illinois prohibits.

The federal Cooling-Off Rule for sales at the home is covered in roofing sales strategies, and the storm canvass and claim-advertising rules of other states are in roofing contractor marketing. Lead sources and response times are in roofing leads.

Unit-price method: from cost per square to a published price

A published price is the roofer's cost per unit, loaded for overhead and margin, and the method is the same for each line.

  1. Measure the roof in squares and apply the pitch factor; the roofing estimate guide gives the factors and waste allowances.
  2. Price materials per measured square from the supplier's current quote, with the waste allowance inside the rate.
  3. Set labor hours per square for installation and per square per layer for tear-off, from the company's own completed jobs.
  4. Multiply hours by the loaded labor rate: the wage plus payroll taxes, workers' compensation and benefits.
  5. Add the overhead share and divide by one minus the target margin; the contractor pricing guide has the markup and margin conversion.
  6. Round each unit price, publish it with its unit and inclusions, and bill pass-throughs at cost.
  7. Verify: after each job, compare the hours logged against the hours the price assumed, and revise any line that misses by more than a stated tolerance.

Sample reroof priced from a published sheet in Palatine, Illinois

The sample is a hypothetical single-family reroof in Palatine, Illinois. The roof size, layers, decking count, material costs, labor hours, burden, overhead and margin are sample inputs. The wage is the BLS 2025 median for roofers in the Chicago-Naperville-Elgin area, $39.47 an hour (O*NET, roofers wages in Illinois, read November 13, 2026), loaded by a sample 25% to $49.34. Overhead is a sample 15% and margin a sample 20%, a multiplier of 1.4375 on direct cost.

Palatine's 2026 re-roof handout sets the permit fee at $103.00, requires a signed contract with the state roofing license number, allows no more than two existing layers to remain, and requires an ice barrier from the eave to at least 24 inches inside the exterior wall line (Village of Palatine, 2026 single family re-roof handout, read November 13, 2026).

Sample Palatine reroof priced from the published sheet (sample inputs labelled; wage, permit and code items as cited)
LineDirect cost per unitPublished unit priceQuantityLine total
Installed roof$180 materials (sample) + 2.0 hours (sample) × $49.34 = $278.68$401 a square26 squares (sample)$10,426.00
Tear-off0.6 hours (sample) × $49.34 + $18 disposal (sample) = $47.60$68 a square per layer26 squares × 2 layers (sample)$3,536.00
Decking replacement$22 sheet (sample) + 0.5 hours (sample) × $49.34 = $46.67$67 a sheet4 sheets, counted after tear-off (sample)$268.00
Ice barrier at eaves$0.30 membrane (sample) + 0.004 hours (sample) × $49.34 = $0.50$0.71 a square foot960 square feet (sample)$681.60
PermitPalatine feeAt cost1$103.00
Total$15,014.60

The total is $5.77 a square foot on 2,600 square feet, inside Fixr's $3.75 to $11 range and above its $4.75 average; the two-layer tear-off alone is $3,536 of it. The homeowner can recompute every line from the sheet and the measurements. The only number not known at signing is the decking count, and the contract states its price.

Decking counts after tear-off: inspections, photos and change orders

The decking count changes the schedule as well as the price. Palatine requires an active re-roof inspection when more than one full 4 by 8 foot sheet of sheathing is replaced or repaired, with the contractor on site and the permit card visible. In the sample, four sheets is more than one, so an inspector visits before the new roof covers the deck. Replacing rafters or other structural members needs a full building permit, which is outside the re-roof permit altogether.

A transparent sheet turns the count into a recorded fact. The crew photographs each soft area before removal, marks the sheets on a roof plan, and the office multiplies the count by the published unit price. A homeowner who sees four photographs and $268.00 has the basis for the change; a homeowner who sees "additional decking, $1,100" has only the roofer's word.

Pre-publication checks for a roofing price sheet

  1. Put the roofing license name and number on the sheet, every bid and every contract.
  2. Give each line a unit, an inclusion list and a stated exclusion, and say whether the per-square rate applies to measured or ordered squares.
  3. Publish a unit price for decking per sheet, and state that the count is made and photographed after tear-off.
  4. Bill the permit at cost, using the municipality's own fee: $103.00 in Palatine.
  5. Remove any deductible discount, rebate or allowance tied to an insurance claim.
  6. Attach the consumer rights pamphlet and acknowledgment to contracts over $1,000, the 3-day notice to contracts signed at the home, and the insurance cancellation statement and form to insurance-funded contracts.
  7. Compare each per-square price with the Fixr range, and write the reason for any price outside it on the sheet.
  8. Verify: on the first three jobs, recompute the contract total from the sheet and the measurements, and confirm it matches the signed price to the cent.

Price sheets, estimates and decking counts in FieldRanger

In FieldRanger, an estimate is built from the HubSpot deal or contact record, or in FieldRanger and kept tied to its deal, and goes out for signature through PandaDoc. A won deal becomes a job with its context carried over. Photos taken on the job attach to the work order and sync to the customer's HubSpot record, so the decking photographs sit beside the contract. Clock-ins are logged against each job, which supplies the hours for step 7 of the method, and revenue reports show job revenue and margin by service type. The invoice is generated from the completed work order and syncs with QuickBooks, and payment can be taken in the field through Stripe. A deposit invoice can go out before tear-off, with the balance invoiced on completion. Each day is its own job in FieldRanger, so a two-day reroof is two jobs. Plans are on the pricing page; Start free trial gives 14 days with no card.

Frequently asked questions

What is transparent roofing contractor pricing?

A published price sheet with a unit price for each part of a reroof: installed price per square, tear-off per square per layer, decking per sheet, ice barrier per square foot and the permit at cost, so a homeowner can recompute the contract total from the measurements.

Should a roofer publish prices on the website?

A sheet of unit prices can be published without quoting any single roof, because the total depends on the measured squares, layers and decking count. In Illinois the sheet is an advertisement and carries the roofing license number.

How much does roof tear-off cost per square?

Fixr's February 2026 figures put tear-off and disposal at about $50 a square, up to $150 for heavy materials or several layers. The Palatine sample prices it at $68 a square per layer from a sample 0.6 labor hours and $18 of disposal.

How is replacement decking priced on a roofing contract?

As a unit price per 4 by 8 foot sheet, agreed at signing, with the count made and photographed after tear-off. Fixr's range is $2 to $8 a square foot, or $64 to $256 a sheet.

Does Illinois require a written roofing contract?

Yes, for home repair work over $1,000: the contract states the total cost with parts and materials listed with reasonable particularity, any charge for an estimate, and the business name and address, and the roofing license name and number appear on it.

Can a homeowner cancel a roofing contract in Illinois?

Within 3 business days for a sale made at the home, 15 business days for a buyer 65 or older solicited at home, and, for an insurance-funded contract, until the earlier of five business days after a coverage denial or 30 business days after the insurer receives proof of loss.

The Palatine roof cost $15,014.60, and every dollar of it traces to a published unit price times a measured or counted quantity, including the four sheets of decking nobody could see at signing. In Illinois that arithmetic is close to what the contract statute already demands: parts and materials listed with reasonable particularity, on a contract that carries the license number.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo