Industry

Construction Estimating Software That Runs on HubSpot

Construction estimating software on HubSpot: build the estimate on the deal or in FieldRanger, send it for signature, and turn the won deal into a crew job.

Updated 7 min read

Construction estimating software prices a project before the contract is signed: labor, material, equipment and subcontractor costs applied to the quantities of work, plus overhead and profit. FieldRanger builds that estimate for remodeling and service work on the HubSpot deal or in FieldRanger, and the won deal becomes the job.

Estimating is the first office task in general contractor software, and it is a profession of its own. The Bureau of Labor Statistics counts 226,400 cost estimators in 2025, with 33 percent employed by specialty trade contractors and 15 percent in construction of buildings (BLS Occupational Outlook Handbook, cost estimators, modified August 27, 2026). The same source describes construction estimators reading blueprints and calculating labor, material and equipment estimates, with some visiting the site.

Takeoff, cost estimate and proposal

Three documents carry a construction price, and construction estimating software is sold for each of them.

A takeoff measures quantities from drawings: square feet of drywall, linear feet of footing, cubic yards of concrete, the count of doors and windows. A cost estimate applies a unit cost to each quantity and adds labor hours, equipment time, subcontractor quotes, permits, general conditions, overhead and profit. A proposal presents the price to the owner with the scope, the inclusions and exclusions, allowances for finishes the owner has not yet chosen, and alternates priced separately.

Construction takeoff and estimating software combines the first two, starting from a PDF or a model of the drawings. Construction cost estimating software without takeoff starts at the second, and so does FieldRanger. The estimator enters the priced work on the estimate from a price book of services, parts and rates, and the proposal goes to the customer for signature through the PandaDoc integration.

Kitchen remodel from first call to final invoice

A kitchen remodel shows where each record sits, from the homeowner's inquiry to the last payment.

  1. The inquiry becomes a HubSpot contact and a deal. HubSpot allows custom deal stages, each with a probability that drives the weighted pipeline amount in board view, so a remodeler can add "Site visit scheduled" and "Proposal sent" between the defaults (HubSpot Knowledge Base, set up and customize pipelines, updated September 29, 2026).
  2. At the site visit, the estimator measures the room and photographs the existing cabinets, plumbing and electrical panel.
  3. The estimate is built from the HubSpot deal record without leaving HubSpot, or in FieldRanger, where it stays tied to the deal. It prices cabinets by the linear foot, countertops by the square foot, demolition and haul-off, the plumber's and electrician's quotes, the permit, a contingency, and an allowance for the appliances the homeowner will choose. The estimate writes the HubSpot deal's line items and amount.
  4. The proposal goes to the homeowner for signature through PandaDoc.
  5. The signed deal is marked won, and FieldRanger creates the job with the deal's context carried over. The deal record then shows the job's status, and a job status change can trigger a HubSpot workflow, such as a task for the project manager. The Sales Hub pricing page lists up to 50 workflows with restricted triggers and actions on Starter and up to 300 fully customizable workflows on Professional (HubSpot, Sales Hub pricing, checked November 2026).
  6. Visits are placed on the drag-and-drop calendar with the crew assigned to each job, and each crew member's phone carries the digital work order with the scope and instructions.
  7. Clock-ins and clock-outs record where each worker was, materials are logged against the job, and before and after photos attach to the work order.
  8. The invoice is generated from the completed work order, and invoices and payments sync to QuickBooks. Job completions and notes are logged to the HubSpot timeline.

Estimated cost against job cost

An estimate is a forecast of job cost, and the finished job tests it. FieldRanger records the two quantities that decide the margin. Labor is the time logged against the job, with the location of each clock-in; the construction time tracking software page covers how hours are verified on a job site. Materials are the items logged against the job for job costing. Revenue reports then show job revenue and margin by customer or service type.

The comparison corrects the next price. A service type whose margin falls below target across a season was underpriced, and the estimator raises the labor hours or the material allowance on the next estimate of that type.

Equipment cost belongs in the same comparison: a skid steer, a mixer or a tile saw carries a QR code, so checking it out to a job records who used it and when, and the availability calendar prevents two crews from booking the same machine. Trucks appear on a live map, with maintenance reminders and odometer logs; the construction fleet management software page covers vehicles in detail.

Units in concrete, excavation and general contractor estimates

Trade estimates inside a general contractor's price use different units. Concrete is priced by the cubic yard placed, with forming and finishing by the square foot. Excavation is priced by the cubic yard of cut and fill, with haul-off by the truckload. Framing is priced by the square foot of floor or by the board foot of lumber.

General contractor and construction project estimating software holds the subcontractor quotes for these trades as cost lines, adds general conditions and markup, and presents one price to the owner. Residential construction estimating software and remodeling estimating software do the same at a smaller scale, where the homeowner's selections and allowances move the price more than the structure does. Concrete and site work contractors who price their own jobs have dedicated pages: concrete estimating software and excavation estimating software.

Cloud, AI and free construction estimating tools

Cloud based construction estimating software keeps the estimate in a browser rather than on one estimator's computer. FieldRanger runs inside HubSpot, so the estimate sits with the deal, the contact and the emails that led to it.

Products sold as AI construction estimating software propose quantities or prices automatically. In FieldRanger the estimator sets every quantity, the prices come from the contractor's own price book, and FieldRanger records the actual hours and materials that test them.

Free construction estimating software takes the form of spreadsheets and templates, such as the construction estimate template. A template prices a job, with no link to the customer record, the crew calendar or the job's actual costs. FieldRanger has a 14-day free trial with no card required.

Limits of FieldRanger for construction estimating

FieldRanger fits the remodeler, specialty contractor or small general contractor who sells through HubSpot and wants the estimate, the job and its costs on one customer. The limits below mark where another tool is the better choice.

  • FieldRanger does not perform takeoff from drawings or building models. A contractor bidding commercial work from plans needs takeoff software alongside it or instead of it.
  • The price book holds the contractor's own rates, taken from its records and from supplier and subcontractor quotes. A contractor who prices from a published unit cost database uses an estimating suite that carries one.
  • Progress billing against a schedule of values, retainage and AIA-style pay applications are not built. FieldRanger sends a deposit invoice before the job and generates the balance invoice from the completed work order.
  • Heavy civil and public works bidders, who price large earthwork and paving quantities against bid-day deadlines, are served by estimating suites built for that work.

Frequently asked questions

What is construction estimating software?

Software that prices a construction project before the contract, by applying unit costs, labor, equipment and subcontractor quotes to the quantities of work and adding overhead and profit. Some products also measure the quantities from drawings, which is called takeoff.

What is the difference between takeoff and estimating software?

Takeoff software measures quantities from drawings, such as square feet of drywall or cubic yards of concrete. Estimating software prices those quantities. Construction takeoff and estimating software does both in one product.

Is there free construction estimating software?

Spreadsheets and printable templates price a job at no cost, with no link to the customer, the schedule or the job's actual costs. FieldRanger offers a 14-day free trial with no card required.

What estimating software do general contractors use?

That depends on how the work is won. Contractors bidding commercial work from drawings use takeoff and estimating suites; remodelers and service contractors selling to homeowners need the estimate on the customer record and the job that follows, which is the case FieldRanger covers in HubSpot.

Can construction estimates be built in HubSpot?

Yes. With FieldRanger, an estimator builds the estimate from the HubSpot deal or contact record without leaving HubSpot, or in FieldRanger, where the estimate stays tied to the HubSpot deal.

How do contractors estimate construction costs?

By measuring quantities, pricing each at a unit cost for material, labor and equipment, adding subcontractor quotes, permits and general conditions, then applying overhead, profit and a contingency. Comparing the estimate with the hours and materials logged on the finished job corrects the next one.

Construction estimating on the HubSpot deal keeps the price, the job and the final invoice on one customer record. See pricing for per-technician plans, book a demo to price a real remodel, or Start free trial (14 days, no card).

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo