Industry
Irrigation Billing Software:Start-Ups, Backflow Tests and Repairs Invoiced in FieldRanger and HubSpot
Irrigation billing software on HubSpot: FieldRanger bills start-ups, backflow tests, repairs and winterizations from completed work orders and syncs QuickBooks.
Irrigation billing software turns each completed irrigation visit into a bill: the spring start-up, the backflow test, the repair priced by time and parts, and the fall winterization. FieldRanger invoices each visit from its completed work order, collects card payment through Stripe and passes invoices and payments to QuickBooks, with each property on its HubSpot record.
Billing is the last step of irrigation service software, and irrigation work bills in three shapes. A seasonal visit carries a set price per property. A repair is priced from the time and parts it consumed. An installation is priced on its estimate and, in New York, is taxed differently from every visit that follows it.
Spring start-up and fall winterization charges
A start-up and a winterization are priced before the technician arrives, by the visit or by the zone count. The zone count is recorded on the visit's checklist, and the price basis can sit on the HubSpot contact as a custom property mapped to a FieldRanger field, so the office sees why a twelve-zone property pays more than a four-zone one. A recurring job template creates both visits for each property every year from the service agreement's won deal. The rounds themselves are booked with irrigation scheduling software; this page starts where the technician completes the work order.
Each completed visit produces its own invoice. A start-up that finds two cracked heads and a leaking valve can bill the repair on the same visit, when the homeowner approves it on site, or open a follow-on job with its own estimate when the repair is larger.
A season contract changes the arrangement. When the customer prepays both visits, or pays in installments, the charge runs on a calendar rather than on a completed visit, and FieldRanger can charge each installment automatically to the customer's card on file. A HubSpot subscription can carry it instead: HubSpot either charges the buyer's stored payment method on each billing date or sends a recurring invoice for the buyer to pay. Payments run through HubSpot payments on Starter, Professional or Enterprise, or through a connected Stripe account on any subscription (HubSpot Knowledge Base, create subscriptions, updated September 29, 2026). FieldRanger still records both visits on a season-contract property and invoices whatever falls outside the contract.
| Charge | Record in FieldRanger | New York treatment |
|---|---|---|
| Spring start-up | Recurring job; checklist with zones run and faults found | Taxable: opening a sprinkler system is a maintenance service |
| Fall winterization | Recurring job; checklist with the blowout and the backflow device type | Taxable: closing a sprinkler system is a maintenance service |
| Repair of heads, valves, controllers or sections of pipe | Time against the job; parts logged as materials; before and after photos | Taxable: repair, on both labor and materials |
| Maintenance contract | The visits recorded as jobs | Taxable: listed as repair, maintenance or installation |
| Backflow test | Recurring job; checklist with readings; photo of the assembly | Not listed in the two publications; a question for the accountant |
| Original installation or complete replacement | Estimate on the deal; certificate in the job's files | Capital improvement: no tax with Form ST-124 |
Backflow test fees and utility filing charges
A backflow test bills as two amounts that belong to different parties: the tester's charge and, where the water utility levies one, a fee for receiving the report. Wentzville, Missouri, shows how the second amount moves with the calendar. The city requires lawn irrigation backflow devices to be tested every year by a Missouri-certified tester, with reports due June 1. Its filing fee is $14 for a report received before June 1, $18 for one received from June 5 through July 1, and $38 after July 5 (City of Wentzville, backflow testing, checked November 12, 2026).
The fee follows the date the city receives the report, not the date of the test. A test done on May 20 and filed on July 8 costs $24 more than one filed the same week, and the invoice either passes the difference to the customer or the contractor absorbs it. Filing before June 1 keeps the line at $14.
In FieldRanger the annual test is a recurring job sent only to technicians who hold the tester certification, through skill-based assignment. Its checklist holds the device type, the serial number, each gauge reading and the pass or fail result, with a photo of the assembly on the work order. Filing with the utility happens on the utility's own process, outside FieldRanger.
Repair time and materials on the work order
A summer repair is priced by what it took: the technician's time on site and the parts installed. Job-level time tracking logs the hours against the job, and the located clock-in and clock-out show that the hours were spent at that property. Heads, valves, fittings and pipe are checked out of a specific warehouse and logged against the job as materials, so the stock count and the job cost agree. Photos of the snapped rotor and the repaired head attach to the work order, and the customer's signature closes it when someone is home.
FieldRanger then generates the invoice from the finished work order, built from the price book of services, parts and rates. Revenue reports then show revenue and margin by service type, which separates repair income from the seasonal visits on the same properties.
New York sales tax on irrigation service and installation
New York divides irrigation work into taxable service and exempt capital improvement. The Department of Taxation and Finance states that "Maintaining, servicing, and repairing real property are services that are subject to sales tax", and its list of taxable services includes "repairing or opening/closing sprinkler systems". For repair, maintenance or installation work, the contractor charges tax "on both materials and labor". For a capital improvement, a properly completed Form ST-124, Certificate of Capital Improvement, from the customer relieves the contractor of liability for the tax (NY Tax Bulletin ST-505, landscaping services, updated October 16, 2026).
Publication 862 places the line within the sprinkler system itself. The original installation or complete replacement of an underground lawn sprinkler system is a capital improvement. The repair or replacement of centrifugal pumps, pump controllers, remote control valves, sections of piping, sprinkler controllers and sprinkler heads is a repair, maintenance or installation service, and so are maintenance contracts. The contractor pays sales tax to its supplier on the parts it buys either way (NY Publication 862, dated April 2001, checked November 12, 2026).
The rate depends on where the property is. Publication 718 lists the state rate of 4 percent and combined rates of 8 percent in Monroe County, 8¾ percent in Suffolk County and 8⅞ percent in New York City (NY Publication 718, effective March 1, 2025). Backflow testing appears in neither publication, so its treatment is settled with the company's accountant.
HubSpot's automated sales tax needs a Revenue Hub Professional or Enterprise account with at least one Revenue Hub seat (HubSpot Knowledge Base, create subscriptions, updated September 29, 2026); otherwise the tax is applied in QuickBooks once the invoices sync. The property's county and the account's ST-124 status can sit on the HubSpot record as custom properties, mapped to FieldRanger fields, so the technician and the office see the same treatment.
Sample invoices in Monroe County, New York
The sample bills one spring start-up that found two broken heads. The prices are sample inputs; the taxability and the 8 percent Monroe County rate come from the Department's publications cited above.
| Line | Quantity | Sample price | Amount | Tax basis |
|---|---|---|---|---|
| Spring start-up, 6 zones | 1 | $95.00 | $95.00 | Opening a sprinkler system: taxable |
| Replacement spray heads | 2 | $12.00 | $24.00 | Repair materials: taxable |
| Repair labor | 0.5 hour | $80.00 an hour | $40.00 | Repair labor: taxable |
| Subtotal | $159.00 | |||
| Sales tax at 8 percent | $12.72 | Monroe County combined rate | ||
| Total | $171.72 |
The same customer's new system, had it been installed that spring, would bill differently. With a signed ST-124 in the job's files, the installation invoice carries no sales tax, and the contractor's tax was paid to its supplier when it bought the pipe and heads. The first repair to that system the following summer is taxable again, at 8 percent on labor and parts.
A start-up visit from completed work order to QuickBooks
- The recurring template created the start-up job from last year's service agreement deal, and the visit was booked into the April round.
- The technician clocks in at the property, runs each zone and records the zone count and the faults on the checklist.
- Two heads are replaced with stock checked out of the warehouse, logged against the job, and the half hour of repair time is logged with them.
- The homeowner signs on the phone, and the technician completes the job; the dispatcher sees the status change.
- The invoice is generated from the completed work order, and the homeowner pays by card at the property through Stripe.
- QuickBooks receives the invoice and the payment, and the completion and photos reach the customer's HubSpot timeline.
- A cracked lateral found on the same visit becomes a follow-on estimate on the HubSpot deal, priced as irrigation estimating software describes.
Irrigation billing outside FieldRanger
- Sales tax by state or county is applied in HubSpot or QuickBooks.
- No filing of backflow test reports or fees with water utilities.
- Pricing is per technician, listed on pricing, after a 14-day trial that needs no card.
Frequently asked questions
What is irrigation billing software?
Software that bills irrigation work from the service record: start-ups, winterizations, backflow tests, repairs by time and materials, and installations. FieldRanger produces each bill from the finished visit's work order, with Stripe for card payment and QuickBooks for the ledger.
How should sprinkler start-ups and winterizations be billed?
Each visit at a set price per property, by the visit or by the zone count, or as a season contract paid up front or in installments. FieldRanger invoices each completed visit, and a season contract's installments can be charged automatically to the customer's card on file.
Is sprinkler system repair taxable in New York?
Yes. New York treats repairing, opening and closing sprinkler systems as taxable maintenance of real property, with tax charged on both materials and labor. Publication 862 lists repair or replacement of heads, valves, controllers, pumps and sections of piping as taxable services.
Is a new sprinkler system installation taxable in New York?
The original installation or complete replacement of an underground lawn sprinkler system is a capital improvement under Publication 862. With a properly completed Form ST-124 from the customer, the contractor collects no sales tax on the job and pays tax to its supplier on the materials.
What is a backflow test filing fee?
A charge some water utilities make for receiving the annual test report. Wentzville, Missouri, charges $14 for a report received before June 1, $18 from June 5 through July 1 and $38 after July 5, so the filing date sets the fee.
Can irrigation billing software charge a season contract automatically?
Yes. FieldRanger charges recurring work automatically to a card on file, and a HubSpot subscription can also charge a stored payment method on each billing date or send recurring invoices, through HubSpot payments or a connected Stripe account.
A Monroe County homeowner's start-up and its two replacement heads come to $171.72 with tax, while the system installed under an ST-124 billed no tax at all; in FieldRanger both invoices sit against the same HubSpot customer and trace to the visits that produced them. Rounds are booked on irrigation scheduling software, the trade is mapped under irrigation service software, and pricing shows the per-technician plans with a 14-day, no-card Start free trial.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo