Template

Mechanic Work Order Template:VIN, Mileage In and Out, Complaint, Cause, Correction and New Hampshire Written Authorization

Mechanic work order template: VIN, mileage in and out, complaint, cause and correction, labor, parts and New Hampshire written authorization for a brake job.

Updated 10 min read

Download .xlsxExcel spreadsheet · 14 KB · Free, no sign-upFill it in online

A mechanic work order template is the shop's record of one vehicle's repair: the VIN, mileage in and out, the customer's complaint, the technician's cause and correction, each labor operation and part, and the customer's authorization for the work and for any added cost. The example below fills every field for a brake repair in Concord, New Hampshire.

The field list is one of the free field service templates kept by FieldRanger, field service software that runs inside HubSpot. It serves repair shops and mobile mechanics. The work order opens when the vehicle arrives and closes when it leaves; the mechanic invoice template then bills its lines.

Mechanic work order fields and what goes in each

The table lists every field of the template, which the page offers as a free .xlsx download with no sign-up. A Word, Google Docs or paper version follows it row for row.

Mechanic work order template fields and what goes in each
FieldWhat goes in it
ShopName, address, phone and the posted labor rate per hour
Work order numberA number from one sequence, carried onto the estimate, the parts tickets and the invoice
Date and time inWhen the vehicle and keys were received
CustomerName, phone, email, and how the customer will approve added work: in person, by phone, by text or by e-signature
VehicleYear, make, model, engine, color and license plate
VINAll 17 characters, read from the vehicle rather than from the paperwork
Mileage inOdometer reading at check-in
Mileage outOdometer reading at release, after any road test
ComplaintThe concern in the customer's own words
Estimate requestWhether the customer asked for a written estimate, and its number
CauseWhat the tests found, with the readings that support it
CorrectionWhat was done to remove the cause
Labor operationsOne line per operation: description, hours, rate, technician
PartsOne line per part: part number, condition (new, used, rebuilt or reconditioned), quantity, unit price
Authorization logEach approval: the work, the amount, date, time, method and the name of the person approving
Added workWork found after the estimate, its price, and the customer's answer
Declined workRecommendations not approved, each with the measurement behind it
Replaced partsWhether the customer asked for the old parts, and where each one went
Technician sign-offTechnician name and the time the work was finished
Road testDistance driven and the result
ReleaseDate and time out, and who collected the vehicle

The VIN row has a fixed format. Each VIN consists of 17 characters, the check digit sits in position nine, and the letters I, O and Q are not permitted (49 CFR 565.13, via Cornell LII, checked November 2026). A VIN copied from a registration card can lose a character. One read from the vehicle and tested against the check digit is the safer basis for a parts lookup.

The two mileage rows bracket the shop's custody of the car. Their difference should equal the road test; anything larger is unexplained miles.

Work order, estimate and invoice on one repair

Three documents travel with an auto repair. The estimate prices the work before it starts. The work order records what the shop was authorized to do, what it found and what it did. The invoice bills the finished job with tax added.

A general work order template carries the customer, site, task and sign-off fields for any trade; the mechanic version adds the vehicle, the odometer readings and the complaint, cause and correction. Fleet services run from a maintenance work order template, where a mileage interval opens the job instead of a complaint.

Filled mechanic work order: front brake repair on a 2019 Subaru Forester in Concord, New Hampshire

The owner reported a grinding noise when braking and asked for a written estimate. The shop, customer, VIN and prices are illustrative; the authorization steps follow New Hampshire's statute, set out in the section after the tables.

Filled mechanic work order, vehicle, findings and release (example shop, illustrative entries)
FieldExample entry
ShopExample Auto Service, 40 Example Street, Concord, NH 03301 · 603-555-0142 · labor $135.00 an hour
Work order numberWO-2026-1187 · estimate EST-2026-1187
Date and time inNovember 10, 2026, 7:40 AM
CustomerRiley Morgan · 603-555-0177 · riley@example.com · agreed at check-in to approve added work by text and e-signature
Vehicle2019 Subaru Forester, 2.5-liter, blue, plate 0000000
VINJF2EXAMPLE0000000 (illustrative, not a real vehicle)
Mileage in68,412
Mileage out68,419
Complaint"Grinding from the front when braking, worse at low speed"
Estimate requestWritten estimate requested at check-in
CauseFront pads worn to the backing plates, 1 mm of friction left; both front rotors scored; left front caliper slide pin seized, so the left inner pad wore first
CorrectionReplaced front pads and rotors; replaced left front caliper; bled the brake system; road tested
Added workLeft front caliper and brake bleed, found at 9:50 AM, priced at $247.50
Declined workValve cover gasket seep, estimated separately at $310.00, declined by phone at 10:12 AM; rear tires at 3/32 inch tread, noted for the owner
Replaced partsOld parts requested at check-in: pads and rotors boxed in the cargo area; caliper returned to the supplier as an exchange core
Technician sign-offJ. Alvarez, 1:55 PM
Road test7 miles; no noise, straight stops, pedal firm
ReleaseNovember 10, 2026, 4:30 PM, collected by Riley Morgan
Filled mechanic work order, labor, parts and authorization log (illustrative prices)
LineHours or qtyRate or unit priceLine totalAuthorized
Diagnose brake noise, road test0.5 h$135.00$67.50Estimate signed 7:45 AM
Replace front pads and rotors1.6 h$135.00$216.00Estimate signed 7:45 AM
Front brake pads, ceramic, new1 set$89.00$89.00Estimate signed 7:45 AM
Front rotors, new2$78.00$156.00Estimate signed 7:45 AM
Estimate total$528.50Riley Morgan, in person
Replace left front caliper, bleed brakes0.9 h$135.00$121.50Revised estimate e-signed 10:12 AM
Left front caliper, remanufactured1$112.00$112.00Revised estimate e-signed 10:12 AM
Brake fluid, DOT 31 qt$14.00$14.00Revised estimate e-signed 10:12 AM
Revised total before tax$776.00Riley Morgan, by e-signature

The revised total is $247.50 above the signed estimate, or 46.8 percent. The ceiling without written consent was $581.35, so the caliper waited for the e-signature at 10:12 AM. Labor totals 3.0 hours, or $405.00, and parts $371.00; tax goes on the invoice.

New Hampshire written authorization under RSA 358-D

New Hampshire regulates motor vehicle repair facilities in RSA chapter 358-D. The chapter covers any person who performs service or repair work on a motor vehicle, and its definition of motor vehicle excludes motor trucks, motorcycles and motor-driven cycles (RSA 358-D, New Hampshire General Court, checked November 2026). Its sections account for four rows of the template.

The estimate request row comes from section 358-D:2. On request, the shop gives a written estimate before any work: an itemization of the work, an estimated price for labor and parts, and an estimated completion date. Under section 358-D:7, the shop may not make a waiver of the estimate a condition of doing the job.

The authorization log comes from sections 358-D:3, 358-D:5 and 358-D:8. Work in a written estimate needs the customer's written permission to proceed; where writing is impracticable, the shop may estimate orally and take oral permission. A charge more than 10 percent above the estimate needs the customer's written consent. Without any estimate, work still needs authorization.

The added and declined work rows follow section 358-D:4. Work of an unrelated and different nature needs notice of its estimated cost and the customer's written or oral permission. In the example, the caliper is brake work on the same axle and fell under the 10 percent rule; the valve cover gasket is unrelated work, priced alone and declined.

The replaced parts row follows section 358-D:9: old parts go back to a customer who asked before the work, except parts returned under a warranty or exchange agreement. Section 358-D:10 sets the invoice, which lists each part valued above $0.50 with its retail cost, the labor hours and cost, any guarantee, and any used, rebuilt or reconditioned part. Section 358-D:11 requires a posted notice of at least 6 square feet.

An e-signature can carry the written consent. Under RSA 294-E:7, an electronic record satisfies a law that requires a writing, and an electronic signature satisfies a signature requirement (RSA 294-E:7, checked November 2026). The chapter applies only between parties that have each agreed to transact electronically, judged from context and conduct (RSA 294-E:5, checked November 2026). The customer row records that agreement at check-in.

Complaint, cause and correction on the repair line

The three rows divide one repair into what was reported, what was found and what was done. The complaint stays in the customer's words: it is the symptom the road test must clear. The cause names a component and a reading, such as 1 mm of pad material or a seized slide pin. The correction names the operation performed on that component.

Each correction maps to a labor line, and each labor line maps back to a correction. "Brakes, 3.0 hours" gives a second technician nothing to verify; "replace left front caliper, bleed brakes, 0.9 hours" can be checked against the part on the bench. The cause row also supports a later warranty claim, because it records what was measured on the day.

Mechanic work order instructions from check-in to release

  1. Record the date and time in, the customer's contact details, and how the customer will approve added work.
  2. Read the VIN from the vehicle, check it against the ninth-position check digit, and write the mileage in.
  3. Write the complaint as the customer states it, and ask whether a written estimate is wanted.
  4. Diagnose, write the cause with its readings, and price the correction as labor and parts lines.
  5. Obtain permission to proceed in the form the state requires, and log the time, method and name.
  6. When the work grows, price the addition, compare the new total with the state's ceiling, and log a second approval before continuing.
  7. Record declined work with the measurement behind it, and record where each replaced part went.
  8. Road test, write the mileage out, and confirm the difference matches the test drive.
  9. Sign off the work with the technician's name and time, then release the vehicle and record who collected it.
  10. Before invoicing, check that every labor and parts line has an authorization entry, and that the total agrees with the last approved figure.

Work order software for shops and mobile mechanics

A paper work order keeps the approvals in handwriting at the service desk, and the invoice is typed from it later.

In FieldRanger, job details, customer information and instructions reach the technician's phone on a digital work order, with job-specific checklists for inspection steps. Time is logged against each job, parts used are logged for job costing, and before and after photos attach to the work order. The customer signs on site as proof of completion; the invoice is generated from the completed work order; payment can be taken through Stripe. Job notes are logged to the HubSpot timeline, so the declined gasket stays on the customer's record. The work order software page describes the work order.

The VIN and the mileage in and out go on the job's checklist as lines the technician fills at check-in and release. Estimates go out for signature through the PandaDoc integration, so the customer e-signs both the estimate and the revised total.

Fill it in here, or download the spreadsheet

The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.

Frequently asked questions

What goes on a mechanic work order?

The shop and work order number, the date and time in, the customer and approval method, the vehicle with its VIN, mileage in and out, the complaint, cause and correction, one line per labor operation and per part, the authorization log, added and declined work, replaced parts, the technician's sign-off, the road test and the release.

Is there a free mechanic work order template for Word?

The page offers a free .xlsx download with no sign-up rather than a Word file: a Template sheet with every field and a Sample sheet with the filled Concord work order. A Word or Google Docs version can follow the same fields as labeled boxes, with the labor, parts and authorization rows as one grid at the foot of the page.

What is the difference between a repair order and an invoice?

The repair order, or work order, records what the shop was authorized to do, what it found and what it did. The invoice bills that work afterwards, repeating the labor and parts lines and adding tax and payment terms.

Does a repair shop need written permission before starting work in New Hampshire?

Under RSA 358-D:3, work set out in a written estimate needs the customer's written permission to proceed, or oral permission where writing is impracticable. Under RSA 358-D:5, a charge more than 10 percent above the estimate needs written consent.

What do complaint, cause and correction mean on a repair order?

The complaint is the problem as the customer reports it, the cause is what the technician's tests found, and the correction is the operation that removed the cause. Each correction should match a labor line.

WO-2026-1187 at release

The Forester left at 68,419 miles with two signatures in its log, the estimate at 7:45 AM and the revised total at 10:12 AM, and a declined gasket on file for its next visit. Those entries become the invoice lines, and the estimate and invoice forms on either side of this work order sit in the free field service templates hub. A shop that wants the same check-in-to-release record on technicians' phones can try it for 14 days through Start free trial, without a card; plans, priced per technician, are on pricing.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo