Template

Electrical Quote Template:Fixed Price by Circuit, Wiring Certificate, Inspection Fee and a North Dakota Basement Example

Electrical quote template for fixed-price work: scope and price by circuit, permit and inspection terms, and a filled North Dakota basement finish example.

Updated 10 min read

Download .xlsxExcel spreadsheet · 13 KB · Free, no sign-upFill it in online

An electrical quote template is the fixed-price offer an electrician sends the customer: the scope written circuit by circuit with a price for each, the permit and inspection the job needs, the exclusions, one total, the expiry date, the payment terms and the signature. The example below fills every field for a basement finish in Minot, North Dakota.

It belongs to the free field service templates of FieldRanger, electrical contractor software that runs inside HubSpot. Behind each price sits the electrician's working sheet of labor units and material costs, kept on the electrical estimate template. The quote carries the result of that sheet, not its contents.

Electrical quote fields and what goes in each

The table lists the template's fields; the free .xlsx download, with no sign-up, carries them on a Template sheet. The scope rows repeat once per circuit.

Electrical quote template fields and what goes in each
FieldWhat goes in it
ContractorBusiness name, address, phone, contractor license, and the supervising electrician's license class and number
Quote number and dateA unique number and the date issued
Valid untilThe last date the price may be accepted
Customer and siteOwner, address, year built, and the area being wired
Existing serviceService size, panel make, spaces open, and condition
Load basisThe load calculation result that shows the service can carry the new circuits
Scope by circuitFor each circuit: number, room, devices and fixtures, breaker type, price
Panel workBreakers added, labeling, directory update
AlarmsSmoke and carbon monoxide alarms: locations, power and interconnection
Owner-supplied itemsEach item the owner provides, with its cost where the inspection fee depends on it
PermitWhat is filed, by whom, and when relative to the start of work
InspectionWho inspects, the fee, how the fee was computed, and the point at which work waits for inspection
ExclusionsWork outside the price, named
PriceThe sum of the circuit prices
Inspection feeA separate line, at the amount in effect
TotalPrice plus inspection fee
Deposit and paymentsAmount due at acceptance and the balance trigger
ScheduleStart date, days on site, and any filing deadline that limits the dates
ChangesHow added circuits are priced and approved, and that the fee is recalculated
Code editionThe edition of the National Electrical Code the work follows
WarrantyWorkmanship warranty and its period
AcceptanceCustomer signature and date

Filled electrical quote: basement finish in Minot, North Dakota

The house was built in 1998 with a 200-amp service and a gas furnace and water heater in the basement. The owners are finishing 900 square feet of the basement into a bedroom, a family room, a bathroom and a mechanical room. The contractor, customer and prices are illustrative; the certificate, fee, alarm and tax terms follow North Dakota rules cited after the tables.

Filled electrical quote, terms (example business, illustrative entries)
FieldExample entry
ContractorExample Electric LLC, 20 Example Avenue, Minot, ND 58701 · 701-555-0124 · contractor license 0000 (example) · supervising master electrician license 0000 (example)
Quote number and dateEQ-2026-0362 · November 12, 2026
Valid untilDecember 12, 2026
Customer and siteJamie Larson, 410 Sample Street SW, Minot, ND 58701 · built 1998 · 900 sq ft basement finish
Existing service200 A, 40-space panel, 12 spaces open, no defects found on November 9, 2026
Load basisLoad calculation EQ-0362-LC dated November 10, 2026: existing service carries the six new circuits
Owner-supplied itemsBathroom vanity light, owner's receipt for $140.00
PermitWiring certificate filed by the supervising master electrician before work starts; startup copy to the State Electrical Board and to the power company
InspectionState Electrical Board district inspector; fee $160.00 on a job cost of $6,000.00; drywall waits until the electrician confirms the inspector does not require a visit before cover
ExclusionsDrywall, patching and painting; HVAC ductwork; the bathroom exhaust fan unit, supplied and installed by the HVAC contractor; data, TV and speaker wiring; light fixtures other than those listed
Deposit and payments$1,800.00 at acceptance; $4,220.00 when the work is complete and the final certificate paperwork is filed
ScheduleStart December 7, 2026; four days on site
ChangesAdded circuits priced in writing before the work; the inspection fee recalculated on the new job cost
Code edition2026 National Electrical Code, as referenced in the State Electrical Board's wiring standards
WarrantyWorkmanship warranted one year from the final inspection
AcceptanceCustomer signature and date
Filled electrical quote, scope and price by circuit (illustrative prices)
CircuitRoom and workBreakerPrice
PanelSix new breakers in the existing panel, labeling, directory updated$570.00
B1Bedroom: six receptacles, ceiling light, switch15 A dual-function AFCI/GFCI$865.00
B2Family room: eight receptacles20 A AFCI$980.00
B3Family room: eight LED wafer lights on two dimmers, three-way switching at the stair15 A AFCI$1,140.00
B4Bathroom: receptacle at the vanity20 A GFCI$430.00
B5Bathroom: ceiling light, owner-supplied vanity light, wiring and switch for the exhaust fan15 A$720.00
B6Mechanical and storage room: two lights, one receptacle15 A$545.00
AlarmsSmoke alarm in the bedroom; combination smoke and carbon monoxide alarm in the family room outside the bedroom; both interconnected with the existing alarms upstairsFed from B3$610.00
Price$5,860.00
Inspection feeState Electrical Board, on a job cost of $6,000.00$160.00
Total$6,020.00

Each circuit carries its own price, so the customer can see what an eighth receptacle or a second bathroom light would change. The price is fixed for the scope; a circuit added after acceptance goes through the changes row.

North Dakota wiring certificate and inspection fee in the quote

The State Electrical Board lists city electrical inspection departments in Bismarck, Fargo and Grand Forks, and divides the state into 14 districts, each with an assigned inspector (NDSEB, Inspection Districts, checked November 2026). The Minot quote is written for the board's certificate and fee.

The permit row follows N.D. Admin. Code 24.1-05-01-01. An electrical installation with a value of $500 or more has an electrical wiring certificate submitted by the supervising master, class B or power limited electrician. Where the cost of additional installation exceeds $500, the certificate is submitted before work commences: a startup copy goes to the board and a copy to the power company before the work starts and before it is energized. The final paperwork, with the fee, goes to the board within 15 days of completion, use or occupancy, whichever is first, and a copy is left in or on the panel or given to the owner. A late certificate adds $50 to the fee (N.D. Admin. Code ch. 24.1-05-01, amended effective July 1, 2026).

The fee row follows section 24.1-05-01-02. The fee is based on the total amount of the contract or total cost to the owner, including extras. Appliances, heating, ventilating and air-conditioning units, electric motors, generators and industrial machines are left out of the cost. When the owner furnishes material, the owner gives the contractor the amount spent, and the contractor includes it. From July 1, 2024, the fee is $50.00 for the first $500.00 plus 2 percent of the balance up to $20,000.00. Charging a customer more than the fee in effect is grounds for discipline of the electrician's license.

The example's arithmetic follows those terms. The $5,860.00 price plus the owner's $140.00 vanity light gives a job cost of $6,000.00; $50.00 plus 2 percent of $5,500.00 is $160.00. The exhaust fan unit sits with the HVAC contractor, outside the electrician's contract.

The alarm line follows section 24.1-06-01-40. Dwelling units have a smoke alarm in each sleeping room, outside each separate sleeping area, and on each additional story, including basements, interconnected so that one alarm sounds them all. A dwelling unit with fuel-fired appliances has a carbon monoxide alarm outside each sleeping area and on every habitable level. The same chapter applies the 2026 edition of the National Electrical Code to any room of an existing building where the wall covering has been removed from all walls (N.D. Admin. Code ch. 24.1-06-01, amended effective July 1, 2026).

The quote has no sales tax line. The Office of State Tax Commissioner states that a contractor who incorporates materials into real property pays the sales or use tax on them, may bill that tax to the customer as a materials cost, and cannot itemize it as a sales tax charge on the customer's invoice (ND Tax, Tax responsibilities for contractors, checked November 2026).

The schedule row has one more date to respect. The board's online system closes on January 29, 2027 at 5:00 PM Central, and no wiring certificates can be filed online until the new system opens on February 3, 2027 (NDSEB home page, checked November 2026). The Minot job starts on December 7, 2026; a quote for work starting in that window files its startup copy first or moves its start date.

Electrical quotes, estimates and service agreements

The estimate is the electrician's internal sheet: each item counted, a labor unit for each, materials by size, markup. The quote is the customer's document, and it rolls those lines into a price per circuit with the terms that hold it. A customer who wants scheduled panel maintenance or thermal scans each year signs an electrical service agreement template rather than a new quote for every visit.

Electrical quote preparation, walkthrough to signature

  1. Walk the space with the owner, mark each room's devices and fixtures, and photograph the panel with its cover off.
  2. Record the existing service and spaces open, and run the load calculation for the new circuits.
  3. Write the scope circuit by circuit, with the breaker type for each, and price each circuit from the estimate sheet.
  4. Add the alarms the state rule requires, with their locations and interconnection.
  5. List owner-supplied items with their cost, and the exclusions.
  6. Compute the inspection fee on the contract price plus owner-supplied material, under the fee schedule in effect.
  7. Set the deposit, the balance trigger, the start date and the code edition, and check the date against any filing outage.
  8. Add the circuit prices and confirm they equal the price, recompute the fee against the schedule, and read the walkthrough notes once against the scope.

Electrical estimating software after the quote is signed

After signature, a spreadsheet quote leaves three tasks to retype: the circuits onto a work order, the hours against the estimate sheet, and the fee onto the invoice.

In FieldRanger, the estimate is built from the HubSpot deal or contact record without leaving HubSpot, or built in FieldRanger and kept tied to its deal, and it can go out for signature through PandaDoc. The won deal becomes a job with its context carried over. Electricians clock in and out with time logged against the job, revenue reports show job revenue and margin by service type, and the invoice is generated from the completed work order. The estimating software page describes the estimate.

The certificate filing and the fee calculation stay with the board's own process: FieldRanger's features include neither, so both are done outside the software.

Fill it in here, or download the spreadsheet

The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.

Frequently asked questions

What should an electrical quote include?

The contractor and license details, a quote number, date and expiry, the customer and site, the existing service and load basis, the scope and price by circuit, alarms, owner-supplied items, permit and inspection terms, exclusions, the price, the inspection fee, the total, payments, the schedule, the code edition, the warranty and a signature line.

What is the difference between an electrical quote and an electrical estimate?

The estimate is the electrician's working sheet of labor units, material costs and markup. The quote is the fixed-price document the customer signs, with those figures rolled into a price per circuit and the terms that hold it.

How is the electrical inspection fee calculated in North Dakota?

On the total contract amount or total cost to the owner, including extras and owner-supplied material: $50.00 for the first $500.00, plus 2 percent of the balance up to $20,000.00, under the schedule in effect from July 1, 2024.

Does a basement finish need an electrical permit in North Dakota?

Where the cost of the added installation exceeds $500, the supervising electrician submits a wiring certificate before work begins, with a startup copy to the State Electrical Board and the power company, and files the final paperwork with the fee within 15 days of completion.

Should an electrical quote show sales tax in North Dakota?

No separate line. The contractor pays sales or use tax on materials incorporated into real property, may include it in the materials cost, and cannot itemize it as a sales tax charge on the customer's invoice.

The Minot basement after acceptance

Once Jamie Larson signs EQ-2026-0362, the startup copy of the wiring certificate goes to the board and the power company before the first breaker is installed on December 7. The final paperwork and the $160.00 fee follow within 15 days of completion. The invoice for the $4,220.00 balance, and the work order before it, are among the free field service templates. On pricing, FieldRanger's plans are listed per technician, and the 14-day Start free trial asks for no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo