Template

Free HVAC Invoice Template:Every Field and a Filled Heat Pump Coil Repair Example

HVAC invoice template with model and serial, refrigerant pounds, labor and warranty fields, filled for a heat pump coil repair in Roanoke, Virginia.

Updated 10 min read

Download .xlsxExcel spreadsheet · 14 KB · Free, no sign-upFill it in online

An HVAC invoice template is the bill for completed heating or cooling work: each unit by model and serial number, the fault found and the repair made, the refrigerant type with pounds recovered and charged, labor, parts, warranty status, tax and payment terms. The example below fills every field for a heat pump coil repair in Roanoke, Virginia.

The field list is free and ungated, one of the free field service templates kept by FieldRanger, the HVAC software that runs inside HubSpot. Three records separate an HVAC invoice from a general bill: the equipment, the refrigerant and the warranty. A repair under a parts warranty is billed two ways, labor to the owner and the part to the manufacturer.

HVAC invoice fields: equipment, refrigerant, labor and warranty

The table lists every field, and the page offers the template as a free .xlsx download with no sign-up. A sample HVAC invoice, a carbonless HVAC invoice form and a spreadsheet copy all carry these rows in this order.

HVAC invoice template fields and what goes in each
FieldWhat goes in it
ContractorBusiness name, address, telephone and contractor license number
Invoice number and dateA unique number from one sequence, and the date issued
Customer and service addressThe person billed, the billing address, and where each unit sits: basement, attic, closet, pad or roof
Call recordWork order number, call type (no heat, no cool, maintenance, warranty), and the date of each visit
TechnicianName and EPA Section 608 certification type of the technician who opened the refrigerant circuit
Equipment servicedFor each unit: type, make, model number, serial number and installation date
Refrigerant recordRefrigerant type, pounds recovered, pounds charged, how the charge was set (by weight or by reading) and the cylinder used
Problem reportedWhat the customer saw, in the customer's words
DiagnosisThe fault, and the test or reading that found it
Work performedWhat was replaced, repaired or adjusted, and where in the system
Readings after repairSupply and return temperatures, pressures, superheat or subcooling, with the outdoor temperature at the time
Diagnostic feeThe charge for the first visit, stated apart from repair labor
LaborHours and rate, or a flat price per task
PartsEach part by part number, quantity and unit price; warranty parts at no charge, with the claim number
Removed partsThe serial number of a removed part where the warranty claim asks for it, and where the part went
Warranty statusInstallation date, registration reference, parts warranty term, labor warranty term, and who pays labor
Subtotal, tax and totalThe sum of the lines, the tax treatment for the state, and the total
PaymentTerms, method, amount paid and balance due
RecommendationsWork found and not done, with its quote number
AcceptanceThe customer's signature and date

The equipment and refrigerant rows are filled before the circuit is opened, from the data plates and the gauges. A warranty claim is checked against the serial number, so that row is copied from the plate, not from memory.

Filled HVAC invoice example: heat pump coil replacement in Roanoke, Virginia

A split heat pump installed in April 2022 stopped heating in November 2026. The first visit found a leak in the indoor coil; the coil was covered by the manufacturer's registered parts warranty, and the second visit replaced it. The business, customers, model numbers and prices are illustrative.

Filled HVAC invoice, header, equipment and refrigerant record (example business, illustrative entries)
FieldExample entry
ContractorExample Comfort Services LLC, 200 Example Avenue SW, Roanoke, VA 24016 · 540-555-0178 · contractor license 0000000000 (example)
Invoice number and dateHV-INV-2026-1147 · November 9, 2026
Customer and service addressGloria and Martin Ashby, 3120 Sample Road SW, Roanoke, VA 24018 · air handler in the basement; heat pump on a pad at the rear wall
Call recordWork order WO-2026-2215 · no heat · diagnosed November 5, 2026; repaired November 9, 2026 after the warranty coil arrived
TechnicianLuis Ortega, EPA Section 608 Universal certification (number on file)
Equipment servicedHeat pump EX-HP30 (example), 2.5 ton, serial 2203X00000 · air handler EX-AH30 (example), serial 2203Y00000 · both installed April 12, 2022
Refrigerant recordR-410A · 2.4 lb recovered into recovery cylinder RC-07 · 8.9 lb charged by weight to the data-plate charge with the line-set adjustment, from a new cylinder
Problem reported"House was 58 degrees this morning; the outside unit runs but the vents blow cool air"
DiagnosisLow pressures in heat mode; electronic detector and bubble test found a leak at the indoor coil's return bends
Work performedRecovered the charge; replaced the indoor coil and the liquid-line filter-drier; nitrogen pressure test, no drop in 30 minutes; evacuated to 450 microns; charged by weight; ran heat and defrost
Readings after repairHeat mode at 44°F outdoor: return air 68°F, supply air 101°F
Removed partsIndoor coil, serial C2203Z00000 (example), tagged with the claim number and returned to the distributor
Warranty statusRegistered April 20, 2022, reference REG-000000 (example) · registered parts warranty to April 2032 · one-year labor warranty ended April 2023; labor billed
PaymentDue on receipt · paid by card on site, November 9, 2026
RecommendationsOutdoor coil cleaning and a two-visit maintenance agreement, quote Q-2026-0512
AcceptanceSigned by Gloria Ashby, November 9, 2026
Filled HVAC invoice, fees, parts, refrigerant and labor (illustrative prices)
LineQuantityUnit priceLine total
Diagnostic fee, November 5 visit1$129.00$129.00
Leak search, electronic detector and bubble test1$195.00$195.00
Indoor coil EX-C30 (example), manufacturer's warranty part, claim WC-000000 (example)1$0.00$0.00
Coil replacement labor: recovery, brazing, nitrogen test, evacuation and startup5.5 h$125.00$687.50
Liquid-line filter-drier1$48.00$48.00
R-410A charged8.9 lb$85.00$756.50
Nitrogen, brazing alloy and shop supplies1 lot$45.00$45.00
Subtotal$1,861.00
Sales taxnone stated$0.00
Total$1,861.00
Paid by card on site$1,861.00
Balance due$0.00

The coil line reads $0.00 rather than being left off: the owner sees what was installed and who paid for it, and the claim number ties the invoice to the manufacturer's credit.

Refrigerant, warranty and tax rows in the Roanoke invoice

The refrigerant row follows EPA Section 608 where Section 608 reaches, and the business's own record where it does not. Technicians servicing appliances that contain 50 or more pounds of ozone-depleting refrigerant must give the owner an invoice showing the amount of refrigerant added, and owners of those appliances keep servicing records with the date, the type of service and the quantity added (EPA, Recordkeeping and Reporting Requirements for Stationary Refrigeration, updated February 25, 2026). The Ashby system holds under 10 pounds of R-410A, an HFC, so that invoice rule does not apply to it. Disposal is recorded separately: technicians disposing of appliances that hold between 5 and 50 pounds keep disposal records.

Two other Section 608 rules shape the row. Only a certified technician may open the circuit, so the technician row names the certification type (EPA, Section 608 Technician Certification Requirements, updated July 15, 2026). Venting during service is prohibited, so the 2.4 pounds left in the system went into a named recovery cylinder (EPA, Prohibition on Venting Refrigerants, updated December 8, 2025). A new coil on an existing R-410A system is a repair, not a new system: "Components used to repair existing systems are not subject to these restrictions" (EPA, Technology Transitions restrictions by sector, updated August 28, 2026).

The warranty row carries a registration reference because manufacturers tie the longer parts term to it. Amana, for one, states that "online registration must be completed within 60 days of installation" for its 10-year parts limited warranty, and notes that some states and provinces do not allow coverage to be conditioned on registration (Amana, Standard Warranty, checked November 2026). The example's manufacturer is illustrative; its certificate is read the same way.

The tax row is empty because of Virginia's contractor rule. The Virginia Administrative Code defines a contractor as "any person who contracts to perform construction, reconstruction, installation, repair" of real property, treats the contractor as the consumer of the materials it furnishes, and states that the contractor "does not pass the sales or use tax on to anyone else as a tax" (23VAC10-210-410, Virginia Law Library, checked November 2026). In a ruling on a residential HVAC business, the Tax Commissioner held that the business "should not separately charge and collect a sales tax from its customers on permanently installed items" (Virginia Tax, P.D. 08-120, June 26, 2008). The contractor pays the tax when it buys the drier and the refrigerant. Washington, by contrast, taxes repair labor, as the plumbing invoice template shows.

HVAC service order invoice template and the two-visit call

An HVAC service order invoice template puts the work order and the invoice on one sheet. The upper half is filled before work starts: the call, the equipment, the problem and the approval. The lower half is filled after: the work, parts, labor, total and signature. A carbonless HVAC invoice form can follow this layout, and so can a PDF or Word version completed on a tablet.

The one-sheet form suits a repair finished in one visit. The Roanoke call took two visits and a warranty part, so it produced a work order and a claim on November 5 and a separate invoice on November 9 that cites both.

HVAC invoice and HVAC estimate as separate documents

The HVAC estimate template prices equipment not yet installed: the load, the rated combination, the efficiency rating, the permit, the options and the deposit. An HVAC invoice bills work on equipment that exists, so its own rows are the serial numbers, the refrigerant pounds, the readings and the warranty status. Where an estimate preceded the work, its number goes on the invoice. A business that bills from QuickBooks Online carries the same rows there, which is how this page serves as a QuickBooks HVAC invoice template.

HVAC invoice instructions from the data plate to the signature

  1. Photograph each data plate and copy the make, model and serial number of every unit worked on.
  2. Record the call type, the problem in the customer's words, and the diagnosis with the test that found it.
  3. Before opening the circuit, record the refrigerant type and the technician's certification; weigh what is recovered and name the cylinder.
  4. List parts by part number, warranty parts at $0.00 with the claim number and the removed part's serial number.
  5. Enter the diagnostic fee, then labor as hours times the rate or a flat price per task.
  6. Record the pounds charged, how the charge was set, and the readings with the outdoor temperature.
  7. Fill the warranty row, apply the state's tax rule, and record payment, recommendations and the signature.
  8. Before sending, compare the serial numbers with the data-plate photographs and the claim, and check that the lines add up to the subtotal.

Contractor invoicing software and the refrigerant record

On paper, the Ashby serial numbers were copied three times: onto the warranty claim, the work order and, four days later, the invoice.

In FieldRanger, digital work orders put the job details and instructions on the technician's phone, and the data-plate photographs attach to the work order. Photos taken on the job sync to the customer's HubSpot record, where the next technician finds the serial numbers. Time is logged against each job at clock-in and clock-out, parts used are logged for job costing, and the invoice is generated from the completed work order. Stripe takes payment in the field, invoices and payments sync with QuickBooks, and completions are logged to the HubSpot timeline. The contractor invoicing software page describes the step from the completed work order to payment.

The pounds go into the work order notes, the claim is filed on the manufacturer's site, and a cylinder-by-cylinder ledger stays in a separate system. Invoice lines are priced from the FieldRanger price book of services, parts and rates.

Fill it in here, or download the spreadsheet

The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.

Frequently asked questions

What should an HVAC invoice include?

The contractor's license number, invoice number and date, customer and service address, call record, technician and certification, each unit's model and serial number, refrigerant type and pounds, diagnosis, work performed, readings, diagnostic fee, labor, parts, warranty status, tax, payment and recommendations.

What does a sample HVAC invoice look like?

The Roanoke example on this page bills a heat pump coil replaced under the manufacturer's parts warranty: the coil at $0.00 with its claim number, and the diagnostic fee, leak search, labor, filter-drier and refrigerant to the owner.

Does an HVAC invoice have to show the refrigerant added?

Under EPA Section 608, technicians servicing appliances that contain 50 or more pounds of ozone-depleting refrigerant must give the owner an invoice showing the amount added. A residential split system holds far less, so the pounds on its invoice are the business's own record of the charge.

Do HVAC contractors charge sales tax in Virginia?

Not as a separate line on installed or repaired equipment. Virginia treats a contractor working on real property as the consumer of its materials, so the contractor pays the tax when it buys them.

Is the HVAC invoice template free?

Yes. The page offers it as a free .xlsx download with no sign-up: a Template sheet with every field and the parts and labor lines, and a Sample sheet with the filled Roanoke invoice.

The Ashby heat pump after the coil repair

The 8.9 pounds charged on November 9 set this system's baseline: a low charge before spring would point to a second leak. Quote Q-2026-0512 offers the visits an HVAC service agreement template would schedule, and the work order and estimate on either side of this bill sit among the free field service templates. Per-technician plans are listed on pricing, and the 14-day Start free trial asks for no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo