Template
Free Maintenance Work Order Template:Every Field and Filled Preventive and Corrective Forklift Examples
Maintenance work order template for preventive and corrective work: asset, task list, parts, downtime and sign-off, filled for forklift service in Tulsa.
A maintenance work order template is the record of planned or repair work on one asset: the asset and meter reading, the trigger, the task list and results, parts, labor, downtime, and the sign-off that returns the asset to service. The examples below fill it for a preventive service and a corrective repair on one forklift in Tulsa, Oklahoma.
The field list is free and ungated, one of the free field service templates kept by FieldRanger, which makes field service software that runs inside HubSpot. A general work order template starts from a customer's request; a maintenance work order starts from an asset and its schedule, and ends with a decision on whether that asset may go back into service.
Maintenance work order fields: asset, trigger, tasks, downtime and sign-off
The table lists the template's fields, offered on this page as a free .xlsx download with no sign-up. The third column marks the rows that apply to preventive work, to corrective work, or to both.
| Field | What goes in it | Applies to |
|---|---|---|
| Work order number | A unique number from one sequence | Both |
| Work type | Preventive (scheduled) or corrective (repair of a found or reported fault) | Both |
| Trigger | The interval that came due, or the finding, inspection or breakdown report that raised the work | Both |
| Parent work order | The preventive work order or inspection that found the fault | Corrective |
| Customer and site | Account name, site address and the area where the asset sits | Both |
| Asset | Asset number, type, make, model, serial number and rated capacity | Both |
| Meter reading | Hour meter, odometer or cycle count at the start of the work | Both |
| Maintenance interval | The interval from the manufacturer's schedule or the maintenance plan, and the reading at which the next service falls due | Preventive |
| Priority | Routine, urgent or out of service | Both |
| Energy isolation | How the asset was de-energized and tagged, and by whom | Both |
| Task list | Each task with a result: pass, adjusted, replaced or fail | Both |
| Measurements | Readings taken against limits, such as chain stretch or fluid level | Both |
| Findings | Faults found, each with a recommendation | Both |
| Parts and materials | Part number, description, quantity and the stock location it came from | Both |
| Labor | Technician, date, start and finish times, hours | Both |
| Downtime | When the asset left service and when it returned, in clock hours and in scheduled operating hours | Both |
| Photos | The fault before the repair and the repair after it | Corrective |
| Return-to-service test | The test that shows the asset is safe to use, and its result | Both |
| Technician sign-off | Name, signature and date | Both |
| Customer sign-off | The customer's maintenance supervisor, confirming return to service | Both |
| Next service due | The date or meter reading of the next scheduled service | Preventive |
Preventive maintenance work order example: 250-hour forklift service in Tulsa
A forklift service contractor maintains an electric counterbalance truck on site at a Tulsa distribution center. The businesses, the asset and the interval are illustrative; a real truck's interval comes from its manufacturer's schedule.
| Field | Example entry |
|---|---|
| Work order number | PM-2026-1140 |
| Work type | Preventive |
| Trigger | 250-hour service due at 6,250 hours |
| Customer and site | Example Distribution LLC, 900 Example Parkway, Tulsa, OK 74107 · dock 3 charging area |
| Asset | FL-07: electric counterbalance forklift, 5,000 lb rated capacity, 48-volt lead-acid battery; make, model and serial number from the data plate |
| Meter reading | 6,248 hours |
| Maintenance interval | Every 250 hours; next service at 6,500 hours |
| Priority | Routine |
| Energy isolation | Forks lowered to the floor, key removed, battery connector unplugged and tagged by the technician |
| Task list | Forks for cracks, heel wear and locks: pass · Lift chains for stretch and lubrication: pass · Mast rollers and channels: pass · Hydraulic fluid level: pass · Lift and tilt cylinders for leaks: fail · Steering: pass · Service and parking brakes: pass · Horn, lights and travel alarm: pass · Seat belt and overhead guard: pass · Battery water, cables and connector: adjusted · Tires: pass · Data plate legible: pass |
| Measurements | Lift chain stretch on the chain gauge, below the manufacturer's replacement mark; hydraulic fluid at the full mark |
| Findings | Oil at the left tilt cylinder rod seal; mast drifts forward with a load raised. Recommendation: reseal both tilt cylinders before further use |
| Parts and materials | Battery water, 2 gallons, and chain lubricant, both from truck stock |
| Labor | Chris Allen, November 10, 2026, 8:05 AM to 9:35 AM, 1.50 hours |
| Downtime | Scheduled service window 8:00 AM to 9:40 AM |
| Return-to-service test | Not passed: forward drift under load. Truck tagged out of service at 9:40 AM; corrective work order CM-2026-0388 raised |
| Technician sign-off | Chris Allen, signed November 10, 2026 |
| Customer sign-off | Pat Nguyen, maintenance supervisor; out-of-service tag acknowledged |
| Next service due | 6,500 hours |
Corrective maintenance work order example: tilt cylinder reseal on the same truck
The finding on the preventive work order raises the corrective one, and the parent number ties the two together in the asset's history.
| Field | Example entry |
|---|---|
| Work order number | CM-2026-0388 |
| Work type | Corrective |
| Trigger | Finding on PM-2026-1140: tilt cylinder leak and forward mast drift |
| Parent work order | PM-2026-1140 |
| Customer and site | Example Distribution LLC · dock 3 maintenance bay |
| Asset | FL-07 |
| Meter reading | 6,249 hours |
| Priority | Out of service |
| Energy isolation | Forks lowered, mast tilted fully back and blocked, battery connector unplugged and tagged |
| Task list | Remove both tilt cylinders · Replace rod seals, wipers and O-rings · Inspect rods for scoring · Reinstall and torque the pins · Top up hydraulic fluid · Cycle tilt ten times to purge air · Drift test |
| Measurements | No scoring on either rod; hydraulic fluid at the full mark after bleeding |
| Findings | Both rod seals hardened; the right cylinder had begun to weep |
| Parts and materials | Tilt cylinder seal kit, 2; hydraulic fluid, 2 quarts; checked out of the contractor's south Tulsa warehouse |
| Labor | Chris Allen, November 11, 2026, 10:30 AM to 2:00 PM, 3.50 hours |
| Downtime | Out of service 9:40 AM, November 10, to 2:15 PM, November 11: 28.58 clock hours, or 20.58 scheduled operating hours on the site's 6:00 AM to 10:00 PM two-shift day |
| Photos | Leaking seal before removal; rods after cleaning; resealed cylinders installed |
| Return-to-service test | Test load raised and held 10 minutes with the mast vertical: no drift, no leaks. Passed at 2:10 PM |
| Technician sign-off | Chris Allen, signed November 11, 2026 |
| Customer sign-off | Pat Nguyen; tag removed, returned to service at 2:15 PM |
The two downtime figures answer different questions. The 28.58 clock hours measure the asset. The 20.58 operating hours measure what the customer lost: 12 hours 20 minutes on November 10 and 8 hours 15 minutes on November 11, with the unscheduled overnight hours excluded. A contract that promises a downtime limit names which figure it means.
OSHA examination, removal-from-service and lockout rules for forklifts
The out-of-service decision follows the federal standard for powered industrial trucks. Under 29 CFR 1910.178(q)(1), any power-operated industrial truck not in safe operating condition shall be removed from service, and repairs shall be made by authorized personnel. Under (q)(7), trucks shall be examined before being placed in service, kept out of service when the examination shows a condition adversely affecting safety, and examined at least daily (OSHA, 29 CFR 1910.178, most recent amendment listed November 18, 2016).
The daily examination belongs to the customer's operators and the 250-hour service to the contractor; the work order connects them when either finds a fault. The energy isolation row reflects the lockout/tagout standard, which covers the servicing and maintenance of machines and equipment and requires energy control procedures, employee training and periodic inspections (OSHA, 29 CFR 1910.147, most recent amendment listed May 2, 2011). The work order records the step taken; the employer's written procedure defines it.
Shop work order template for equipment repaired at the shop
A shop work order template serves equipment brought to the contractor's shop instead of serviced where it works. It keeps the asset, task, parts, labor and sign-off rows and adds the handover rows: date received, condition and photos at intake, accessories, the customer's authorization and approved repair amount, the shop bay, and the pickup record. Its downtime runs from collection to delivery back, transport included. A mechanic work order template applies the same intake rows to vehicles, identified by VIN and odometer instead of an asset number and hour meter.
Maintenance work order instructions: from the schedule to return to service
- Raise the work order from its trigger: the interval that came due, or the finding or breakdown report, with the parent work order for corrective work.
- Identify the asset by number and data plate, and record the meter reading before work starts.
- Record the energy isolation step and who applied it.
- Work the task list in order and record a result for every task, with a measurement wherever the task has a limit.
- Record each finding with a recommendation, and raise a corrective work order for any fault that cannot wait for the next service.
- Record parts with part numbers, quantities and stock location, and labor with start and finish times.
- Record when the asset left service and when it returned, in clock hours and in scheduled operating hours.
- Run the return-to-service test and record the result; a failed test keeps the asset tagged out.
- Sign the work order, and have the customer's supervisor sign the return to service.
- Before filing, confirm that every task has a result, the parts match the tasks, the downtime matches the timestamps, and the next service is set.
Maintenance work order template formats: Excel, Google Sheets and paper
A maintenance work order template in Excel or Google Sheets holds one row per field, or one row per work order in a log that sums downtime and labor by asset across a year. A paper form suits a technician without a phone, and the office keys the results into the log afterward. The fields stay the same in every format.
Work order software and the maintenance schedule
In FieldRanger, templates for maintenance contracts and repeat service calls create the scheduled visits, and maintenance can be scheduled and tracked for each piece of equipment. The work order puts the job details, customer information and instructions on the technician's phone. It carries job-specific checklists for quality and compliance, before and after photos attached to the work order, and the customer's signature on site as proof of completion. Technicians check parts out of a specific warehouse, so stock is counted where it sits, and each technician's truck can be its own stock location, which is where the battery water on PM-2026-1140 came from. Parts used on each job are logged for job costing. The invoice is generated from the completed work order, and job completions, notes and updates are logged to the HubSpot timeline. The work order software page lists the fields in a FieldRanger work order.
A 250-hour interval is scheduled by date from the asset's expected use, and the meter reading is entered on the work order.
Fill it in here, or download the spreadsheet
The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.
Frequently asked questions
What is a maintenance work order?
A record of planned or repair work on one asset: the trigger, the asset and its meter reading, the tasks and their results, parts, labor, downtime, findings and the sign-off that returns the asset to service.
What is the difference between preventive and corrective maintenance work orders?
A preventive work order is raised by a schedule interval and works through a fixed task list. A corrective work order is raised by a fault, found on inspection or reported after a breakdown, and records the repair and the test that returns the asset to service.
What should a maintenance work order include?
Work order number, work type, trigger, parent work order, customer and site, asset, meter reading, interval, priority, energy isolation, task list with results, measurements, findings, parts, labor, downtime, photos, the return-to-service test, both sign-offs and the next service due.
What is a shop work order template?
A work order for equipment repaired at the contractor's shop. It adds intake rows to the maintenance fields: date received, condition and photos at intake, accessories, the customer's repair authorization, the shop bay and the pickup record.
Is there a maintenance work order template in Excel?
Yes. The page offers a free .xlsx download with no sign-up: a Template sheet with every field and a Sample sheet with the filled preventive and corrective work orders. A separate log with one row per work order can total downtime and labor by asset.
FL-07 back in service with 6,500 hours set
FL-07 returned to service at 2:15 PM on November 11 with two resealed tilt cylinders and its next service due at 6,500 hours. Its file shows why the truck missed 20.58 hours of two shifts. The general work order and the invoice that bills CM-2026-0388 are among the free field service templates. Pricing lists FieldRanger's per-technician plans, and Start free trial runs 14 days with no card, time enough to schedule a fleet's next services from one recurring template.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo