Template
Free Work Order Template:Every Field and a Filled HVAC Example
Work order template with every field a job needs, from site access to sign-off, a filled HVAC service call example and field-by-field instructions.
A work order template is a fixed list of the fields that authorize a job and record its completion: who requested the work, where and on what equipment, what the technician must do, what was found, done and used, and who signed it off. The template below lists every field, then fills it in for an HVAC service call.
The field list is free and ungated, and it is one of the free field service templates published by FieldRanger, which makes field service software that runs inside HubSpot. A Word, Excel or Google Sheets copy, or a printable PDF form, can follow this field list without change: each field becomes a labeled box or a cell.
Work order template fields
The table lists the template's fields, offered as a free .xlsx download with no sign-up. The office fills the first half before the visit; the technician fills the second half on site.
| Field | Filled by | What goes in it |
|---|---|---|
| Work order number | Office | A unique number from one sequence, later printed on the invoice |
| Date created | Office | The date the request was received |
| Requested by | Office | Name and phone of the person who asked for the work |
| Customer | Office | Account name and billing contact |
| Site address | Office | Where the work is, with the unit or building |
| Access notes | Office | Gate codes, key location, roof hatch or ladder, parking, hours the site is open |
| Site contact | Office | The person to meet on the day, with a phone number |
| Priority | Office | Emergency, urgent or routine, with the response the priority promises |
| Work type | Office | Repair, maintenance, installation or inspection |
| Problem reported | Office | The fault in the customer's own words |
| Equipment | Office | Make, model, serial number and location of the equipment, and the refrigerant type for cooling equipment |
| Reference | Office | Quote number, service agreement or the customer's purchase order number |
| Assigned technician | Office | Name of the technician, and any helper |
| Scheduled date and window | Office | The visit date and the arrival window promised to the customer |
| Safety notes | Office | Known hazards at the site and the precautions they require |
| Tasks and checklist | Office | The steps the job requires, each with a box to tick |
| Arrival and departure | Technician | Times on and off site, and labor hours if different |
| Findings | Technician | What the technician measured and found, including readings |
| Work performed | Technician | What was repaired, replaced or adjusted |
| Parts and materials used | Technician | Part, quantity and which truck or warehouse it came from |
| Refrigerant recovered or added | Technician | Refrigerant type and pounds, or "none" |
| Photos | Technician | Before and after photos, listed or attached |
| Follow-up needed | Technician | Further work recommended, to be quoted separately |
| Status | Technician | Completed, incomplete or needs follow-up |
| Customer sign-off | Customer | Printed name, signature and date, confirming the work was done |
| Technician signature | Technician | Name and signature of the technician who did the work |
A blank work order template holds these fields with no entries. A work order form template presents them as boxes on one page, which suits a printed copy carried on a clipboard.
Filled work order example: rooftop unit service call at a restaurant
The example is a commercial HVAC repair: a 10-ton rooftop unit at a restaurant blowing warm air during the lunch service. The business, the customer and the readings are illustrative.
| Field | Example entry |
|---|---|
| Work order number | WO-2026-0412 |
| Date created | November 11, 2026, 10:05 |
| Requested by | Kim Ortiz, general manager · 602-555-0110 |
| Customer | Example Grill LLC, accounts payable · ap@example.com |
| Site address | 300 Example Boulevard, Phoenix, AZ 85004 |
| Access notes | Roof hatch above the dry storage room; ladder key with the manager |
| Site contact | Kim Ortiz, on site until 17:00 |
| Priority | Urgent: same-day visit |
| Work type | Repair |
| Problem reported | "Dining room is warm; the unit on the roof is running but the air is not cold." |
| Equipment | Rooftop unit RTU-1, 10 tons, model and serial numbers from the nameplate; refrigerant R-410A |
| Reference | Customer purchase order PO-5521 |
| Assigned technician | Alex Kim |
| Scheduled date and window | November 11, 2026, 13:00 to 15:00 |
| Safety notes | Disconnect and lock out the unit before opening panels; keep clear of the roof edge |
| Tasks and checklist | Confirm the complaint at the thermostat; check the filters; check the condenser fans and compressor; check the capacitors and contactor; measure the refrigerant pressures; test the cooling after repair |
| Arrival and departure | 13:20 to 15:05; 1.75 labor hours |
| Findings | Condenser fan motor 2 not running; run capacitor for that motor failed open; pressures within range once the fan ran; filters dirty |
| Work performed | Replaced the run capacitor on condenser fan motor 2; replaced four filters; supply air measured 18 °F below return air after the repair |
| Parts and materials used | 1 run capacitor, from truck stock; 4 pleated filters, 20 x 25 x 2 in, from truck stock |
| Refrigerant recovered or added | None |
| Photos | Failed capacitor in place; new capacitor installed; dirty and clean filters |
| Follow-up needed | Condenser coil heavily soiled; quote a coil cleaning |
| Status | Completed, follow-up quote to send |
| Customer sign-off | Kim Ortiz, signed, November 11, 2026 |
| Technician signature | Alex Kim, signed |
The refrigerant field is kept on every HVAC work order, including when the entry is "none". The EPA requires a technician who services an appliance holding 50 or more pounds of ozone-depleting refrigerant to give the owner an invoice showing the amount of refrigerant added (EPA, Recordkeeping and Reporting Requirements for Stationary Refrigeration, updated February 25, 2026). A field filled on every job means the figure exists when that rule applies.
Work order template instructions: field by field
The order below follows the job from the phone call to the signature, and it ends with a check.
- Assign the next work order number when the request arrives, and record the date, the requester and the customer.
- Write the site address, the access notes and the site contact. A technician who cannot reach the equipment cannot start the job.
- Set the priority and the work type, and copy the reported problem in the customer's words, before anyone interprets it.
- Identify the equipment by make, model, serial number and location, so the technician can bring the likely parts.
- Assign the technician, set the date and arrival window, and write the safety notes and the task checklist.
- On site, the technician records the arrival time, then the findings, including any readings taken.
- The technician records the work performed and every part used, with its quantity and where it came from.
- The technician records refrigerant recovered or added, takes the photos, and notes any follow-up work.
- The customer signs off, and the technician signs and sets the status.
- Back at the office, check that every checklist box is ticked or explained, that the parts list matches the work performed, and that the hours match the arrival and departure times. Then send the work order to billing.
The completed work order is the source document for the bill. Its parts, hours and work performed become the line items on the free invoice template, and its follow-up note becomes the next quote.
Work order formats: Word, Excel, Google Sheets and printable PDF
A work order template in Word lays out the fields as a form with space for handwriting. A work order template in Excel or Google Sheets keeps one row per field and can total parts and hours. A printable PDF of the blank work order template suits a technician who fills it in by hand on site, and the office then retypes the entries.
Work orders, purchase orders, service tickets and invoices
A work order authorizes a job and records what was done on it. A purchase order is the customer's commitment to pay for goods or services, and its number appears on the work order as a reference. A service ticket records a request for help; it becomes a work order once a job is scheduled against it. An invoice bills for the completed work.
The same fields change with the trade. A maintenance work order template carries a recurring schedule and a checklist per visit, for planned service rather than a breakdown. A mechanic work order template identifies a vehicle by year, make, model, VIN and mileage in place of a site and its equipment.
Work order software and the paper form
A paper or spreadsheet work order is read once the technician returns it. Until then, the office does not know whether the job is finished, and the entries are retyped into the invoice and the customer record.
In FieldRanger, a won HubSpot deal becomes a job with its context carried over. The work order puts the job details, customer information and instructions on the technician's phone, in a mobile app built for technicians in the field, with a job-specific checklist, before and after photos attached to the work order, and the customer's signature captured on site. Parts are checked out of a specific warehouse or the technician's truck, so "from truck stock" on the form is a stock location of its own in FieldRanger. Job status shows on the HubSpot deal record, and job completions, notes and updates are logged to the HubSpot timeline. The work order software page lists each field in a FieldRanger work order and who fills it.
Fill it in here, or download the spreadsheet
The form below is the same template: totals calculate as you type, with the spreadsheet's own formulas, and your entries stay in this browser. Download it filled in, print it or save it as a PDF, or take the blank file.
Frequently asked questions
What should a work order include?
A work order number, the customer and site, access notes, the priority and work type, the reported problem, the equipment, the assigned technician and schedule, safety notes and a task checklist, then the findings, work performed, parts used, photos, status and the customer's sign-off.
Is there a free work order template for Word or Excel?
The page offers a free .xlsx download with no sign-up, which opens in Excel or Google Sheets: a Template sheet with every field and a Sample sheet with the filled rooftop unit service call. A Word copy can follow the same fields as a one-page form.
What is the difference between a work order and a purchase order?
A work order authorizes a job and records the work done. A purchase order is the customer's commitment to pay for goods or services. The purchase order number is written on the work order so the invoice can be matched to it.
Who fills out a work order?
The office fills the request, site, equipment, schedule and task fields before the visit. The technician fills the findings, work performed, parts, photos and status on site, and the customer signs off.
What is the difference between a work order and an invoice?
A work order records the job: what was requested, what was found and what was done. An invoice bills for it, using the hours and parts the work order recorded.
The work order between the quote and the invoice
The HVAC work order above takes its job from a request and hands its parts, hours and follow-up to the invoice and the next quote, both of which have templates in the free field service templates hub. On a technician's phone the same fields fill in during the visit, and the job completion is logged to the HubSpot timeline when the work order closes. FieldRanger pricing lists the per-technician plans, and the Start free trial button opens a 14-day trial with no card.
FieldRanger runs field service inside HubSpot
Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.
Book a demo