Guide

How to Bid a Plumbing Job:Fixture Counts, Rough-In and Finish Labor, Saint Paul Permit Fees, Minnesota Code Items and Commercial Plan Review

How to bid a plumbing job: count fixtures, price rough-in and finish apart, add Saint Paul permit fees and Minnesota code items, and bid commercial plan sets.

By Published Updated

13 min read

How to bid a plumbing job: count the fixtures from the plans or the walk-through, price the rough-in and the finish as separate stages, add the permit fees from the city's schedule and the inspection trips the code requires, then add overhead and margin. A commercial bid adds the plan set, the specifications and plan review.

A plumbing bid loses money in the gap between two visits. A bathroom priced as one lump covers the pipe and leaves out the second trip to set fixtures after the tile, the return for the rough-in inspection, or the permit line for each fixture. A commercial bid priced from the architect's fixture schedule alone can miss the riser diagrams a plan reviewer asks for. This guide uses one state and one city throughout: Minnesota, whose plumbing code is the 2020 Minnesota Plumbing Code, and Saint Paul, whose permit fees are charged per fixture. It compares residential and commercial bids, then covers the fixture count, rough-in and finish labor, permit and inspection lines, the code items that move a residential price, the commercial plan set, a sample bathroom bid, bid errors by stage and a checklist. It belongs to the pricing and quoting guides from FieldRanger, which also makes plumbing software that runs inside HubSpot.

A bid is a priced offer to do defined work, written so the customer or the general contractor can accept it as it stands; the estimate is the working calculation behind it, set out in the sections below. Rough-in is the drain, waste, vent and water piping installed before walls and floors are closed. Finish, also called trim or set, is the stage that mounts the fixtures and connects them. A fixture in Saint Paul's permit sense is each plumbing fixture installed "whether New, Set, Rough-in or replaced, including Waste and/or Piping".

Residential and commercial plumbing bids compared

The two kinds of bid answer different documents. A residential bid answers a homeowner's description and the plumber's own walk-through, while a commercial bid answers drawings, specifications and a general contractor's bid form.

Residential and commercial plumbing bids compared
DimensionResidential bidCommercial bid
Scope set byThe walk-through and the homeowner's requestPlans, specifications and addenda
Fixture count fromThe rooms visitedThe fixture schedule and floor plans
Fixture modelsChosen by the plumber or the homeownerNamed in the specifications by manufacturer and model
Permit basis in Saint PaulPer fixture, with plan review waived for a minor remodelPer fixture, after review of two complete plan sets
ScheduleSet by the plumber, with the tile or drywall trade in betweenSet by the general contractor's schedule
Bid goes toThe ownerThe general contractor, as a subcontractor bid

A commercial bid also carries terms a residential bid does not: bid bonds, subcontractor quote leveling and filed sub-bids on public work, which how to bid a construction job and how to bid a job cover. The pricing method underneath is the same for both: fixtures, stages, permits, overhead and margin.

Fixture count as the unit of a plumbing bid

The fixture count sets three lines at once: rough-in hours, finish hours and the permit fee. Saint Paul's permit application lists the fixtures it charges for, among them the bidet, water closet, urinal, lavatory, bathtub, shower, sink, garbage disposal, dishwasher, drinking fountain, laundry tub, floor drain, water softener and automatic clothes washer (City of Saint Paul, plumbing permit application, effective February 25, 2023). Catch basins, rain leaders and sillcocks carry no fixture fee.

A residential count comes from walking every room the job touches and listing each fixture by type, by stage and by whether it is new, relocated or replaced in place. A relocated toilet needs new drain and vent rough-in; a toilet replaced in place needs only a finish visit. The two read the same on a homeowner's list, and the bid separates them because one carries hours inside the floor and the other does not.

A commercial count comes from the fixture schedule on the drawings, checked against the floor plans, because the schedule lists types and the plans show quantities. A discrepancy between the two is a question for the architect before bid day, and its answer is acknowledged on the bid form.

Rough-in and finish as separate labor stages

Rough-in and finish are priced as two stages because they happen on two visits with an inspection between them. Minnesota's administrative code states that "No building drainage or plumbing system or part thereof shall be covered until it has been inspected". The administrative authority also performs the final inspection and witnesses the test before the system is put into use (Minnesota Rules 1300.0215, read November 12, 2026). The rough-in inspection is therefore a hold point: the walls stay open until it passes.

Each stage carries its own lines. Rough-in carries cutting, drain and vent piping, supply piping, the pressure or water test and a trip to meet the inspector. Finish carries setting fixtures, trim, connections, the final test and a second inspection trip. Between them sits time the plumber does not control, while the tile setter or the drywall crew closes the room, so the bid states the finish visit as a separate scheduled stage rather than as a continuation of the first.

A bid priced as one block hides this structure. The homeowner sees one number, the plumber books one visit, and the second visit, the two inspection trips and the gap between stages are absorbed into whatever margin the block contained.

Permit and inspection lines from Saint Paul's fee schedule

Saint Paul's Department of Safety and Inspections charges a plumbing permit from a short schedule. It lists an initial permit fee of $92, $36 per plumbing unit, $6 per water-supplied unit, $34 per gas unit, $15 for each further 100,000 BTU on a unit above 100,000, and a $1 state surcharge (City of Saint Paul, plumbing application, inspection and fees, last edited October 7, 2026). Storm and sanitary sewer connections are $85 each on the application form.

Three bid rules follow from the schedule:

  1. The permit is its own line. It is computed from the fixture count, so a customer comparing bids can see the same fee on each.
  2. A change order can need a new permit. The application states that "A new permit must be purchased for additional work not included on the original permit", without the initial fee or surcharge, so an added fixture costs $36 and $6 in fees before any labor.
  3. The contractor pulls the permit. For a contractor job, Saint Paul states that the application "must be completed by a properly licensed plumbing contractor" (City of Saint Paul, plumbing plan review and inspections, 2023), which makes the license holder responsible for the inspections the fee pays for.

Plan review is waived in Saint Paul for a "minor remodel": plumbing work in a one- or two-family dwelling limited to "five or fewer fixture-types" that presents no ambiguity of code compliance. A bathroom with a toilet, a lavatory and a shower qualifies; a basement finish that adds a bar sink, a laundry tub, a floor drain, a water softener, a shower and a toilet does not, and its bid allows for plans and review time. Licensing and the first year of a plumbing company are covered in how to start a plumbing business.

Minnesota Plumbing Code items that move a residential price

The 2020 Minnesota Plumbing Code is Minnesota Rules chapter 4714, which took effect December 17, 2021 and "incorporates by reference the 2018 edition of the Uniform Plumbing Code with Minnesota amendments" (Minnesota Department of Labor and Industry, 2020 Minnesota Plumbing Code, read November 12, 2026). The department's code book fact sheet adds that the rule adopts chapters 2 to 11, 16 and 17 of the 2018 UPC and Appendices A, B and I (DLI code book fact sheet).

Four items from the department's answers to code questions change what a residential bid contains (DLI, Minnesota Plumbing Code frequently asked questions, read November 12, 2026):

  • Minimum fixtures in a dwelling. The code requires "at least one flushing toilet, one lavatory, one kitchen sink and one bathtub or shower", and hot water "for bathing, cooking, laundry and washing purposes". A bid that removes the only tub for a remodel keeps a shower in scope.
  • Water softeners in larger homes. Above four bathroom groups, a footnote to Table 611.4 calls for an engineered installation, accepted on plans prepared by the master plumber or a Minnesota-licensed engineer, so the bid prices the plan.
  • Floor drains. Emergency and tell-tale floor drains within 25 feet of a vented branch or main need no individual vent, which changes the vent piping a basement bid carries.
  • Clear water. Saint Paul's application states that condensate and other clear water "cannot drain to a sanitary sewer", so a furnace or water heater replacement bid includes the approved discharge route.

Commercial plumbing bids: plan sets, specifications and plan review

A commercial plumbing bid in Saint Paul starts from a plan set the city will review, and the bid prices both the installation and the documents. The city requires two sets of complete plumbing plans and specifications, and states that "CONSTRUCTION SHALL NOT PROCEED EXCEPT IN ACCORDANCE WITH AN APPROVED SET OF CONSTRUCTION PLANS" (City of Saint Paul, plumbing plan review and inspections, 2023).

Saint Paul commercial plumbing plan submittal and what each sheet means for the bid
Sheet requiredContents the city listsBid consequence
Utility site planBuilding, service lines, well and septic locationsPrices service connections and sewer fees
Floor planAll fixture locations, horizontal drainage, pipe sizesGives the fixture count and pipe takeoff
Roof planRoof drains and the roof area each servesPrices storm drainage
Water riser diagramsIsometric supply system with all pipe sizes and fixturesGives supply pipe lengths and sizes
Soil, waste and vent riser diagramsIsometric waste and vent system with pipe sizesGives DWV pipe lengths and fittings
Plumbing specificationsFixture makes and models, pipe materials and standards, testing and disinfectionFixes material prices and test labor
SignatureA Minnesota-registered engineer, or the licensed master plumber installing the workPrices design time when the plumber signs

The signature line is a pricing decision. Where the drawings come from the engineer, the plumber prices the installation; where the city accepts plans from "the licensed master plumber that will be installing the plumbing", the plumber who signs also prices design and the review cycle. The city also lists projects that may need plans sent to the Minnesota Department of Labor and Industry: state-licensed facilities, public buildings paid for by the state, and school projects of $100,000 or more. Food and lodging establishments may need a separate review by the Department of Health or the Department of Agriculture.

Sample bathroom remodel bid in Saint Paul

The sample bids a bathroom in a Saint Paul single-family house: the tub is removed, a tiled shower is built in its place, and the toilet and lavatory are replaced in place. Three fixture types keep it a minor remodel without plan review. The hours, the materials allowance, the overhead rate and the margin are sample inputs, labelled as such. The wage is the BLS median for plumbers, pipefitters and steamfitters, $30.67 an hour in May 2025 (BLS Occupational Outlook Handbook, modified October 29, 2026). It is loaded to $43.81 by dividing by 70.0 percent, the wage share of private industry compensation in June 2026 (BLS Employer Costs for Employee Compensation, released September 9, 2026).

Sample bathroom bid, cost lines by stage
LineCalculationAmount
Rough-in labor10.0 sample hours × $43.81$438.10
Finish labor6.0 sample hours × $43.81$262.86
Inspection trips2 trips × 1.5 sample hours × $43.81$131.43
Overhead19.0 hours × $35.00 sample rate$665.00
MaterialsSample allowance: valve, drain, pipe, fittings, toilet, lavatory faucet$1,450.00
Saint Paul permit$92 + 3 × $36 + 3 × $6 + $1$219.00
CostSum$3,166.39
Bid price$3,166.39 ÷ (1 − 0.35 sample margin)$4,871.37

The same job bid as one block, without the inspection trips and the permit, carries $455.43 less cost: 3.0 hours of labor at $131.43, their $105.00 of overhead and the $219.00 permit. Priced at the same 35 percent target, that bid comes to $4,170.71. Once the real cost of $3,166.39 is paid, it keeps $1,004.32, a margin of 24.1 percent instead of 35. The missing lines are small one at a time and cost 10.9 points of margin together.

The bid itself presents the stages to the homeowner: rough-in and its inspection, the tile trade's window, then finish and the final inspection, each with a date or a condition. Labor, parts and permit lines then carry through to the bill, laid out on a plumbing invoice template.

Plumbing bid errors by stage

Plumbing bid errors, their mechanism and the fix
SymptomMechanismFix in the bid
Margin lower than bid on finished bathroomsInspection trips and the finish visit priced inside one blockPrice each stage and each inspection trip as its own line
A change order loses moneyAdded fixture needs a new permit and a return tripPrice change orders with the $36 and $6 fees and the trip
Commercial bid short on pipeCount taken from the fixture schedule without the riser diagramsTake pipe lengths from the water and DWV risers
Basement finish delayedSix fixture types exceed Saint Paul's minor remodel limitAllow for plans and review time when the count passes five types
Water heater swap fails inspectionCondensate routed to the sanitary sewerInclude the approved clear-water discharge

How to price a plumbing job sits one level below these errors: the choice between a flat rate and time and materials, compared with a priced rough-in in plumbing quote and in the plumbing flat rate pricing guide.

Plumbing bid checklist

  • Every fixture listed by type, by stage and as new, relocated or replaced in place.
  • Rough-in and finish priced as separate stages, each with its own inspection trip.
  • Permit computed from the city schedule: initial fee, per fixture, per water-supplied fixture, gas units, sewer connections and surcharge.
  • Minor remodel limit checked: five or fewer fixture types in Saint Paul, or plan time allowed.
  • Code items checked: minimum fixtures kept, softener engineering above four bathroom groups, clear-water discharge route.
  • Commercial bids taken from the riser diagrams and specifications, with addenda acknowledged.
  • Design and review time priced where the master plumber signs the plans.
  • Change order terms state that added fixtures carry new permit fees and trips.
  • Overhead per labor hour and target margin applied to the full cost.
  • Stages, dates and exclusions written on the bid the customer signs.

Plumbing estimates and won bids in FieldRanger

FieldRanger keeps a plumbing bid on the HubSpot record it belongs to. An estimate can be built from the HubSpot deal or contact record, or built in FieldRanger and kept tied to that deal, and PandaDoc sends estimates and agreements for signature. A won deal becomes a job with its context carried over.

FieldRanger does not build multi-day jobs: each day is its own job, assigned to a technician, so the rough-in visit and the finish visit are two jobs that match the two stages of the bid. Technicians clock in and out with time logged against each job, which sets actual rough-in and finish hours beside the bid's sample hours, and revenue reports show job revenue and margin by customer or service type. The invoice is generated from the completed work order. The estimating software page shows how an estimate is built.

Frequently asked questions

How to bid a plumbing job?

Count the fixtures, price the rough-in and finish as separate stages with an inspection trip for each, add permit fees from the city's schedule, then add overhead per labor hour and divide the cost by one minus the target margin.

How to price a plumbing job?

Either as a flat rate from a price book or as time and materials, built from loaded labor hours, materials, permit fees, overhead and margin. In the sample above, $3,166.39 of cost became a $4,871.37 bid at a 35 percent margin.

How to bid a commercial plumbing job?

Take the fixture count from the fixture schedule and floor plans, pipe from the water and drain-waste-vent riser diagrams and materials from the specifications, then price the plan review, the bond and the general contractor's terms.

What do Saint Paul plumbing permits cost?

The city lists an initial permit fee of $92, $36 per plumbing unit, $6 per water-supplied unit, $34 per gas unit and a $1 state surcharge, on a page last edited October 7, 2026.

Which plumbing code applies in Minnesota?

The 2020 Minnesota Plumbing Code, Minnesota Rules chapter 4714, effective December 17, 2021, which incorporates the 2018 Uniform Plumbing Code with Minnesota amendments.

Stage lines on the signed bid

A Saint Paul bathroom bid that names rough-in, two inspections and finish as their own lines holds 35 percent; the same job priced as one block keeps 24.1 percent once the permit and the inspection trips are paid. The same stage-by-stage method in other trades sits in the pricing and quoting guides, and a demo shows a plumbing estimate built on a live HubSpot deal, with plans and the trial on pricing.

Run field service on HubSpot with FieldRanger

Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.

Book a demo