Guide
Quote vs Estimate:Binding and Non-Binding Prices, Written Estimate Rules and Validity Periods
Quote vs estimate: a quote binds the price of defined work and an estimate forecasts it. Binding rules, California's written estimate law and validity periods.
In quote vs estimate, the difference is whether the price binds. A quote is a fixed price for defined work that becomes the contract price when the customer accepts it before its expiry date. An estimate is the contractor's forecast of the likely price, which can change as the work proceeds, within any limit the law or the document sets.
The two words are used loosely, and the cost lands on the invoice. A contractor who calls a fixed price an estimate invites a dispute over every change; one who sends an estimate in a state that treats it as a ceiling cannot bill the part found behind the panel without the customer's consent. FieldRanger, whose field service software runs inside HubSpot, files this guide with its pricing and quoting guides. It defines both documents in contract terms, then sets out the federal binding and non-binding estimate rules for movers, California's written estimate rule for appliance repair, and validity periods. A comparison table, a refrigerator repair priced three ways, the choice of document by job type, a checklist and the software record follow.
Quotes and estimates in contract terms
The legal distinction rests on whether the document is an offer. An offer is made so that a reasonable person would expect a binding contract to arise from its acceptance, and "an acceptance by the offeree creates a binding contract" (Cornell LII Wex, offer, last reviewed August 2023). A quote that names the scope, the price and a place to accept meets that test: acceptance forms the contract at the quoted price. An estimate states that the price is not fixed; its acceptance authorizes the work, and the final price follows the work done, within the estimate's own terms and any state rule.
The title on the document does not settle which one it is. A document headed "Estimate" that says the price is fixed for the work described reads as a quote, and a quote that says the price is subject to site conditions reads as an estimate. Two neighboring documents complete the set. A bid is a price submitted against someone else's specification in competition with other bidders, set out in how to bid a construction job. A proposal adds options, terms and a description of approach around a price, compared in estimate vs quote vs proposal.
Binding and non-binding estimates under federal moving rules
The federal rules for interstate household goods movers define binding and non-binding estimates in full, and the model transfers to other field service work. A binding estimate must be provided in writing, and once the shipment is loaded the mover may not collect more than it, except for services the shipper adds after the bill of lading is issued and limited charges for impracticable operations. When the shipper adds goods or services before loading, the mover must reaffirm the binding estimate, prepare a new one, or agree in writing to treat the original as non-binding (49 CFR 375.403, via Cornell LII, checked November 12, 2026).
A non-binding estimate must also be written, furnished free of charge, and must state clearly that it is not binding. It must also tell the shipper that they will not be required to pay more than 110 percent of the non-binding estimate at delivery; charges above that are billed after 30 days (49 CFR 375.405). A non-binding estimate under these rules is therefore not an open-ended number: it carries a collection cap at the moment of delivery. A trades contractor can borrow the structure without the regulation, by stating on an estimate how far the final bill may exceed it before the customer's approval is needed.
California's written estimate rule for appliance repair
California turns the estimate itself into a ceiling for appliance and electronics repair. Business and Professions Code section 9844 requires an initial written estimate for the cost of repair "before performing any repairs", including all costs for parts and labor. The service dealer "may not charge for work done or parts supplied in excess of the estimate without the previous consent of the customer". A reasonable fee for diagnosing the malfunction may be charged if the customer is told the amount in writing before the repair in the residence, and the estimate may be electronic (California Bureau of Household Goods and Services, Electronic and Appliance Repair Dealer Registration Law and Regulations, 2024 edition, checked November 12, 2026).
The regulations in the same book add the detail a repair company builds its paperwork around. Under 16 CCR 2722, the written estimate includes the initial service call, may not be stated as a minimum amount, and excludes sales tax. An estimate given in the residence includes all transportation and travel charges in the labor charge. Where the customer consents orally to more work, the invoice records the consent in full: the date and time, the name of the person authorizing, the telephone number called, the name of the person who received the consent, any conditions, the additional parts and labor, and the total additional cost. Under 16 CCR 2722.5, a diagnosis fee includes the travel made for the diagnosis. The law applies to service dealers who repair major appliances, which section 9801 lists as refrigerators, freezers, ranges, microwave ovens, washers, dryers, dishwashers, trash compactors and room air-conditioners for household use.
Other states regulate the overrun rather than the document. Ohio's rule for consumer repair and service work requires authorization once unforeseen work reaches 10 percent of the estimate, where the consumer asked for an estimate and the anticipated cost exceeds $50, as set out in how to quote a job. An estimate is read against the rule of the state where the work is done.
Validity periods and firm offers
A validity period is the date after which a quote's price lapses, and its legal effect depends on what is being sold. For goods, a merchant's signed written offer that gives assurance it will be held open cannot be revoked for lack of consideration during the time stated, or a reasonable time if none is stated. The period has a ceiling: "in no event may such period of irrevocability exceed three months" (UCC 2-205, via Cornell LII). Article 2 "applies to transactions in goods" (UCC 2-102), so it reaches quotes for equipment and parts; a quote that combines goods with installation labor is classified under the state's own test for mixed contracts.
Labor and services fall outside Article 2. An offer held open for a stated period is then an option contract, and "Most option contracts require consideration" (Cornell LII Wex, option contract, last reviewed August 2023). A 30-day line on a labor quote sets the date the offer lapses; whether the contractor may withdraw it earlier is a question of the state's contract law. Two drafting rules follow. The quote prints a date rather than a number of days, and the date is no later than the supplier's price hold on the materials in it.
Quote vs estimate compared
The table sets the two documents side by side on the points where they differ in practice.
| Dimension | Quote | Estimate |
|---|---|---|
| What it states | A fixed price for a defined scope | The likely price and the conditions that could change it |
| Effect of acceptance | Forms the contract at the quoted price | Authorizes the work; the price follows the work and the estimate's terms |
| Extra hours inside the scope | Carried by the contractor | Carried by the customer, up to any cap |
| Work found outside the scope | A change order, priced and approved before it starts | A revised estimate, with consent where a state rule requires it |
| Federal moving model | Binding estimate: no more than the stated price after loading | Non-binding estimate: no more than 110 percent at delivery |
| California appliance repair | Fixed price for the repair described | A ceiling until the customer consents to more |
| Validity | A printed expiry date; for goods, up to three months irrevocable when signed and assured | A printed expiry date, after which prices are re-checked |
Refrigerator repair in California priced as an estimate and as a quote: a sample
The sample is a hypothetical repair of a refrigerator that has stopped cooling, at a home in California. The overhead rate, margin, diagnosis fee, part costs and hours are sample inputs; the wage, the compensation ratio and the estimate rules are published.
The median wage for home appliance repairers in California is $28.12 an hour in BLS 2025 wage data (O*NET OnLine, local wages for home appliance repairers, site updated October 6, 2026). Wages and salaries were 68.6% of total compensation for private industry installation, maintenance and repair occupations in June 2026 (BLS Employer Costs for Employee Compensation, Table 4), so the loaded rate is $28.12 ÷ 0.686 = $40.99 an hour. With a sample $34.00 of overhead per billable hour, a billable hour costs $74.99, and at a sample 30% margin it sells at $74.99 ÷ 0.70 = $107.13. Parts sell at cost ÷ 0.70.
The company states a $95.00 diagnosis fee in writing before the visit, travel included. The diagnosis finds a failed evaporator fan motor: a $68.00 part sold at $97.14 and one hour of labor at $107.13, so the written estimate is $204.27. With the panel off, the technician finds the defrost thermostat open as well: a $24.00 part sold at $34.29 and half an hour at $53.57, or $87.86 more.
| Line | Estimate for the fan motor | Quote for the fan motor only | Quote to restore cooling |
|---|---|---|---|
| Price agreed before the second fault | $204.27 | $204.27 | $204.27 |
| Treatment of the thermostat | Revised estimate with prior consent | Change order, approved before work | Absorbed in the fixed price |
| Final bill | $292.13 | $292.13 | $204.27 |
| Cost of parts and 1.5 billable hours | $204.49 | $204.49 | $204.49 |
| Profit | $87.64 | $87.64 | −$0.22 |
| Margin on the final bill | 30.0% | 30.0% | −0.1% |
The scoped quote and the estimate end in the same place, by different paperwork: the change order prices the thermostat as new scope, and the revised estimate prices it as a revision the customer consents to, with the consent recorded on the invoice as 16 CCR 2722 requires. The quote written for an outcome, "restore cooling", carries the risk of every fault the diagnosis missed, and in this sample the second part erases the profit. The additional $87.86 is 43.0% of the original estimate, so the same job in Ohio would also stop for authorization under the 10 percent rule.
Document choice by job type
The work decides the document, and a company can use both on one job.
- Diagnostic repairs. The fault is unknown until the equipment is opened, so a paid diagnosis followed by an estimate, with a consent step for anything found later, matches the work and the California rule.
- Defined replacements and installations. Equipment, labor and permits can be priced before the visit ends, so a quote fits, as in the HVAC quote and the plumbing quote guides.
- Work with concealed conditions. A quote for the visible scope, with unit prices or an hourly term for what cannot be seen, states which risk each side carries.
- Competitive work on another party's specification. The price is a bid, on the buyer's form and terms.
- Larger sales with options. A proposal wraps the quote in options, terms and a description of approach.
The quote template lists every field of the fixed-price document, and the estimate template adds the assumptions and variance terms an estimate needs.
Quote and estimate checklist
- Title the document for what it is, and state in the body whether the price is fixed or estimated.
- Write the scope as tasks and quantities, with exclusions named.
- On an estimate, state how far the final bill may exceed it before approval is required, and meet any state rule that is stricter.
- On a California appliance repair, give the written estimate before work, include the service call and travel, and state any diagnosis fee in writing in advance.
- Record every consent to added work with date, time, the names of both people and the added cost.
- Print an expiry date no later than the supplier's price hold.
- Price change orders at the document's own labor rate and parts markup, approved before the work starts.
- After the job, compare the final bill with the first figure, and note which document type produced the smaller gap.
Estimates and quotes on HubSpot records
FieldRanger keeps either document on the HubSpot deal it belongs to. An estimate is built from the HubSpot deal or contact record without leaving HubSpot, or built in FieldRanger and kept tied to the deal, and PandaDoc sends estimates and agreements for signature. The estimating software page sets out both routes. A won HubSpot deal becomes a job with its context carried over, technicians clock in and out with time logged against each job, and the invoice is generated from the completed work order, so the first price and the final bill sit on the same record. Revenue reports show job revenue and margin by customer or service type, which is where a quote type that keeps absorbing extra work shows up. HubSpot's own quote object is a different tool with its own tier requirements, covered in the HubSpot quote tool guide.
Frequently asked questions
What is the difference between a quote and an estimate?
A quote is a fixed price for defined work that becomes the contract price when the customer accepts it. An estimate is a forecast of the likely price that can change as the work proceeds, within any cap the document or a state rule sets.
Is an estimate legally binding?
Not as a fixed price, but it can bind as a limit. Federal rules cap collection on a mover's non-binding estimate at 110 percent at delivery, and California bars appliance repair dealers from charging more than the written estimate without the customer's prior consent.
Can a contractor charge more than the estimate?
Only within the estimate's own terms and the state's rules. In California appliance repair, any amount above the written estimate needs the customer's prior consent, recorded on the invoice; in Ohio, unforeseen work reaching 10 percent of the estimate needs authorization.
Estimate vs quote: which should a service business send?
A quote for defined replacements and installations, where the work can be priced before it starts, and an estimate for diagnostic repairs and hidden conditions. A quote for the visible work with unit prices for the unknown part combines the two.
How long is a quote valid?
Until the date printed on it, set no later than the supplier's price hold. For goods, a merchant's signed written assurance can hold an offer open for up to three months under UCC 2-205; for labor, the date sets when the offer lapses.
Is a quote the same as a bid?
No. A bid is a price submitted against the buyer's specification, on the buyer's terms and in competition with other bidders; a quote is the contractor's own fixed price for scope the contractor defined.
The refrigerator in the sample turned on one $24.00 thermostat: billed with consent under the estimate and the scoped quote, absorbed under the quote for an outcome. Trade versions of both documents, from the HVAC quote onward, sit in the pricing and quoting guides; FieldRanger's plans and Start free trial, 14 days without a card, are on pricing.
Run field service on HubSpot with FieldRanger
Estimates with e-signature, scheduling and dispatch, a technician mobile app and invoicing, synced to the HubSpot deals and contacts the business already keeps.
Book a demo