Calculator

Free Electrical Work Estimate Calculator:Labor, Materials, Overhead, Margin and Permit Fees at Cost

Free electrical work estimate calculator: a job price from labor hours, blended labor cost, materials, overhead and margin, plus permit fees at cost.

Updated 5 min read

A free electrical work estimate calculator prices an electrical job from its labor, materials and fees. The calculator on this page prices labor hours at a loaded labor cost, adds materials and other direct costs, applies overhead and divides by one minus the target margin. Permit and inspection fees are then added at cost, after the margin.

FieldRanger publishes this page and lists the calculator with its other free field service templates. The electrical contractor software page covers how FieldRanger, inside HubSpot, runs the jobs priced here. No sign-up is needed, and the defaults are samples, not market rates for electrical work.

Electrical estimate formula with a pass-through line

The calculator applies two rules in sequence. Costs the contractor marks up go through cost-plus; fees the contractor collects for the authority having jurisdiction go on afterwards, unmarked.

  1. Labor cost = labor hours × loaded labor cost per hour.
  2. Direct cost = labor cost + materials + other direct costs.
  3. Overhead = direct cost × overhead %.
  4. Price = (direct cost + overhead) ÷ (1 − target margin %).
  5. Total = price + permit and inspection fees.

The price is before sales tax. The permit amount is the one the local authority charges for the job; the electrical estimate guide reads permit lines from one city's 2026 fee schedule.

Calculator inputs for electrical work

Electrical work estimate calculator inputs and sample defaults
InputSample defaultWhat it holds
Labor hours6 hoursElectrician and helper hours added together
Loaded labor cost$55 per hourWage plus payroll taxes, insurance and benefits; a blended rate when a journeyman and an apprentice share the job
Materials$220Wire, devices, boxes, breakers and fittings at cost
Other direct costs$0Lift rental, disposal or other costs this job alone creates
Permit and inspection fees$75The authority's fee, billed at cost after the margin
Overhead15% of direct costRent, vehicles, insurance, software and office time
Target margin20% of priceProfit as a share of the price

The labor hours come from the take-off: devices, runs and openings counted from the plans or the site, each with its labor time. The residential electrical estimating guide sets out that take-off; the calculator starts where it ends, with a total of hours.

Blended labor rate for an electrician and an apprentice

The calculator takes one labor rate. When two people of different grades work the job, the rate entered is the hour-weighted average of their loaded costs:

blended rate = (electrician hours × electrician loaded rate + apprentice hours × apprentice loaded rate) ÷ total hours

The hours entered are the total of both people's hours. Entering the electrician's rate for all six hours overprices a job half done by an apprentice; entering the apprentice's rate underprices it. Each grade's loaded rate is that person's wage plus the employer's payroll taxes, insurance and benefits, which the free job estimate calculator page breaks down.

Sample estimate: six labor hours, $220 of materials and a $75 permit

The sample is the calculator's own default job. Every figure is a sample input or the calculator's output.

Sample electrical work estimate, calculator sample defaults
LineArithmeticResult
Labor cost6 hours × $55$330.00
Direct cost$330.00 + $220.00 materials + $0 other$550.00
Overhead$550.00 × 15%$82.50
Price before permit fees($550.00 + $82.50) ÷ (1 − 0.20)$790.63
Profit$790.63 − $632.50$158.13
Permit and inspection feesAt cost$75.00
Total$790.63 + $75.00$865.63

The profit line reads "$158.13 (20% margin, 25% markup on cost)". The margin is measured on the $790.63 price before the permit, since the permit earns nothing. Priced as cost × 1.20, the job would carry a 20% markup and only a 16.7% margin.

The total is the customer-facing figure on an electrical estimate template, with the permit shown as its own line. Where the customer is to accept a fixed price, the same lines go on an electrical quote template.

Permit fee inside the margin: the same job at $898.44

Entered as an "other direct cost" instead of a pass-through, the same $75 fee carries overhead and margin. With every other sample input unchanged, the calculator then returns $898.44, against $865.63 with the fee at cost: $32.81 more for the same permit. Either treatment is a pricing decision; the calculator keeps the two apart so the decision is made on purpose, and the estimate shows which one was used.

Permit lines, estimates and invoices in FieldRanger

The take-off and the price happen before FieldRanger is involved. This is where the calculator meets estimating software. An estimate can be built from the HubSpot deal or contact record without leaving HubSpot, or built in FieldRanger and kept tied to its deal, and estimates and agreements can go out for signature through PandaDoc. The invoice is generated from the completed work order, and invoices and payments sync with QuickBooks. Progress billing and retainage are not built, so a job billed in stages needs another tool for the stage invoices.

Frequently asked questions

How to estimate electrical work?

Count the labor hours from the take-off and price them at a loaded labor cost, blended if an apprentice shares the job. Add materials at cost, add overhead, divide by one minus the target margin, then add permit and inspection fees at cost. The sample job prices at $865.63.

Should permit fees be marked up on an electrical estimate?

The calculator passes them through at cost, after the margin. Marked up as a direct cost, the sample's $75 permit raises the total from $865.63 to $898.44.

What labor rate goes into an electrical estimate?

The loaded labor cost: the wage plus payroll taxes, insurance and benefits per hour. For a mixed crew, enter the hour-weighted average of each grade's loaded rate.

What margin should an electrical contractor use?

The calculator takes the contractor's own target. Its sample uses 20%, which is a 25% markup on direct cost and overhead.

In the $865.63 sample, the permit stays outside the margin; the take-off's hours and a blended rate set everything else. Scheduling and invoicing the job in HubSpot is covered on the electrical contractor software page, and other trade calculators are on the free field service templates hub. Pricing lists FieldRanger's plans. Start free trial: 14 days, no card.

FieldRanger runs field service inside HubSpot

Estimates, scheduling and dispatch, a technician app and invoicing on the HubSpot records sales already keeps. Every plan starts with a free trial.

Book a demo